For wood beams, it is often assumed that the neutral axis is located at the centroid of the
beam. The neutral axis of isotropic, homogeneous materials is located at the centroid of the
material, but wood is neither isotropic nor homogeneous. The varying grain patterns and
knots located throughout wood...
The goal of this study was to develop an understanding of the nature of surge wave loading on
wood framed residential structures for a variety of building configurations and test conditions.
The objectives of the study were: (1) to measure forces on a 1/6th scale wood framed
residential structure, (2)...
The overall goal of this project was to design a wood frame shear wall that could withstand greater displacement before damage occurred to the Gypsum Wall Board (GWB). More specifically, the objectives of the study were: (1) to evaluate damage to the GWB in alternative shear wall designs at 1%,...
In a homogenous and isotropic material, the location of the neutral axis coincides with the location of the centroid of the beam. Wood is anisotropic, meaning that it has different properties in different directions. It is also non-homogenous, meaning that the beam exhibits different properties at different locations throughout its...
International donors play a significant role in the mitigation and prevention of transboundary water disputes and the promotion of cooperation. In doing so, donors can exercise water diplomacy through a wide range of instruments from facilitating or mediating the negotiations to financing capacity building and specific activities in official and...
Torsion test was evaluated as a method to determine the shear strength
parallel to grain of full-size structural composite lumber (SCL). Experimental
results of eighty-five rectangular (44 x 140 mm²) specimens were verified by finite
element analysis. Laminated strand lumber (LSL), laminated veneer lumber
(LVL) and parallel strand lumber (PSL)...
The overall goal of this study was to gain an insight into the load sharing aspect between oriented strand board (OSB) and gypsum wall board (GWB) in shear wall assembly during racking load. More specifically the objectives of the study were to: (1) evaluate qualitatively the load sharing between OSB...
The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
Present day data processing technology requires very high speed signal processing and data conversion rates. One such application which requires high speed is switched capacitor circuits used in Sigma-Delta modulators. A major active component of switched capacitor circuits is the monolithic operational amplifier(opamp). Because of the relatively poor speed performance...