Index Catalog // ScholarsArchive@OSU

The FPL dynamic compression testing equipment for testing package cushioning materials

Creator:: Forest Products Laboratory (U.S.) and Stern, Robert K.
Resource Type:: Technical Report
Full Text:: GRICULTURS ROOK THE MI !DYNAMIC COMPRESSION TESTING EQUIPMENT FOR

Characterizing perpendicular-to-grain compression in wood construction applications

Creator:: Basta, Craig Thomas
Abstract:: Current compression perpendicular-to-grain (c-perp) design values for wood members are based on mean stress using the ASTM D143 specimen. Base design value, as determined from 0.04-in deformation in the ASTM specimen, is applied to all c-perp applications. While the standard ASTM test was presumably believed to adequately reflect relevant c-perp...
Resource Type:: Masters Thesis

Preliminary report on the strength of flat sandwich plates in edgewise compression

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: . fron the rZ- inch square prates as shown by the cutt ing d. iagran {r ie. 3)| Compression f1a_twise

Methods of conducting buckling tests of plywood panels in compression

Creator:: Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: PLYWOOD PANELS IN COMPRESSION- Foreword 1. (a) The testing of plywood panels in compression presents a

Effects of aging on the compressive properties of glass-fabric-base polyester laminates

Creator:: Forest Products Laboratory (U.S.) and Kimball, Kenneth Edmund
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: , evaluation was confined to an examination of compression properties. Compression evaluations were selected

Detection of compression failures in wood

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, May 1961.
Resource Type:: Technical Report
Full Text:: compression failures. Toughness Tests The Forest Products Laboratory toughness testing machine is helpful

Supplement to compression, tension, and shear tests on yellow-poplar plywood panels of sizes that do not buckle with tests made at various angles to the face grain : tension tests

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, McKinnon, P. F., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, 1962. Original report published 1945.
Resource Type:: Technical Report
Full Text:: Supplement to COMPRESSION, TENSICN, AND TESTS *NI YELLCWUCIPILAP

Buckling of thin, curved, plywood plates in axial compression

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed 1960.
Resource Type:: Technical Report
Full Text:: material were pressed flat and subsequently cut into minor coupons for testing in bending, compression, and

A study of compression loading of composite laminates

Creator:: Berbinau, Pierre J.
Abstract:: The compressive behavior of continuous fiber composites is not as well understood as their tensile behavior because research and industrial applications have until recently focused on the latter. Furthermore, most theoretical and experimental studies on the compression of composites have examined the case of unidirectional specimens with fibers along the...
Resource Type:: Dissertation
Full Text:: experimental results obtained from compression testing of graphite/thermoplastic laminates with the same ply

Deflection characteristics of two 20-foot-diameter laminated wood rings subjected to compressive loading along a diameter

Creator:: Forest Products Laboratory (U.S.), Werren, Fred, and Ethington, Robert L.
Abstract:: This report issued in cooperation with the Bureau of Ships, Department of the Navy.
Resource Type:: Technical Report
Full Text:: figure 1. The testing pro- cedure first involved loading of the entire ring in compression, by load P

ScholarsArchive@OSU

The FPL dynamic compression testing equipment for testing package cushioning materials

Characterizing perpendicular-to-grain compression in wood construction applications

Preliminary report on the strength of flat sandwich plates in edgewise compression

Methods of conducting buckling tests of plywood panels in compression

Effects of aging on the compressive properties of glass-fabric-base polyester laminates

Detection of compression failures in wood

Supplement to compression, tension, and shear tests on yellow-poplar plywood panels of sizes that do not buckle with tests made at various angles to the face grain : tension tests

Buckling of thin, curved, plywood plates in axial compression

A study of compression loading of composite laminates

Deflection characteristics of two 20-foot-diameter laminated wood rings subjected to compressive loading along a diameter

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search