Bulk metallic glasses (BMGs) have been reported to have large variability in mode I fracture toughness. In this study, alternating soft and hard regions were created in a Zr₅₂.₅Ti₅Cu₁₈Ni₁₄.₅Al₁₀ (at%) BMG via mechanical imprinting at room temperature. While only 50% of as-cast samples demonstrated plastic deformation during mode I fracture...
Bulk metallic glasses (BMGs) are relatively new amorphous materials that have received much attention in recent years. Rapid cooling methods from the liquid state provides the possibility to bypass crystallization during solidification. Due to the lack of crystal defects such as grain boundaries and dislocations, BMGs can have some special...
High Entropy Alloys (HEA) exhibit unusual properties and are gaining interest as new materials for challenging applications in the aerospace, hypersonic and medical fields. The application of HEAs have been limited by the development of powder production at scale. A recently developed process of plasma spheroidization by 6K, inc. has...
The thermal degradation of structural materials is considered to be a key factor for evaluating the lifetime of current nuclear power plants. Ni-based and Fe-based alloys, such as 690, 625, 304, and 316, are widely used in nuclear industry as structural components due to the extraordinary corrosion resistance and mechanical...
Rework is a common practice in the dairy industry as a way for processors to minimize waste while recovering costs for dairy products that are unsaleable. The regulations available for reworking fluid dairy products only outline product eligibility requirements with a focus on repasteurization of the products containing rework as...
Solid-state amorphous materials show amazing promise in thin-film electronics. The interface-to-bulk ratio of thin films makes interfacial chemistries of these systems of utmost importance. Thin films of amorphous metals, dielectrics and semiconductors have novel chemistries that are not only based upon their elemental constituent makeup, but also based upon the...
Laser Powder Bed Fusion (LPBF) is a process commonly used to create additively manufactured metal parts. The flexibility and complexity allowed by the LPBF process provides opportunity for significant advancement in multiple industries as parts can be customized in shape and function for specific needs. These benefits can be compounded...
The aim of this work was to assess the viability of duplex stainless steel 2205 components built via selective laser melting for seawater applications. First, a comprehensive additive manufacturing assessment was done. The duplex stainless steel 2205 components were selectively laser melted from gas atomized powder (D90 <45m) using a...
High-pressure torsion (HPT) is an effective severe plastic deformation (SPD)
technique to produce bulk nanostructured materials (BNMs). These BNMs often show a combination of exceptional mechanical and physical properties. Processing of single metals and alloys by HPT has been understood that the homogenous microstructures can be achieved throughout the disk...