Index Catalog // ScholarsArchive@OSU

A methodology for real-time scheduling of jobs with splitting on unrelated parallel machines

Creator:: Subur, Fenny
Abstract:: Unrelated parallel machines are machines that perform the same function but have different capacity or capability. Thus, the processing time of each job would be different on machines of different types. The scheduling environment considered is dynamic in both job release time and machine availability. Additionally, each job considered can...
Resource Type:: Masters Thesis
Full Text:: , taking into consideration the capital cost, 2 operation cost, and variation in production demand

The use of process fraction defective as a basis for the design of X chart sampling procedures

Creator:: Withycombe, Richard Perry
Resource Type:: Masters Thesis
Full Text:: Propoaiø 7 Extension of the irnprovemeut8 9 PART IA DETRMLNAflON O SALITC INTERVAL TO CONTROL TEE AflE

An approximation procedure for the allocation of inspection effort

Creator:: Turnblom, John Warren
Abstract:: A comparison of two procedures which allocate inspection effort within a production sequence is presented here. The concern for quality and the need to hold down the costs of quality has resulted in mathematical models which locate inspection so that the desired quality is attained at a minimum cost. In...
Resource Type:: Masters Thesis
Full Text:: process can make for a very complicated production sequence which is extremely difficult to control. The

Group-scheduling problems in electronics manufacturing

Creator:: Geloğullari, Cumhur Alper
Abstract:: This dissertation addresses the "multi-machine carryover sequence dependent group-scheduling problem with anticipatory setups," which arises in the printed circuit board (PCB) manufacturing. Typically, in PCB manufacturing different board types requiring similar components are grouped together to reduce setup times and increase throughput. The challenge is to determine the sequence of...
Resource Type:: Dissertation
Full Text:: 2.2 Production Planning and Control in PCB Manufacturing .......... 17 3 PROBLEM DESCRIPTION

Planning and implementing a manufacturing control system in a job shop environment

Creator:: Maplestone, Robert N.
Abstract:: This thesis is intended to provide the management of small to medium sized job shop companies with a written plan to implement a formal computerized manufacturing planning and control system. The research stemmed from a case study performed at a typical job shop where growth of production activities was complicating...
Resource Type:: Masters Thesis
Full Text:: & R Industries 3.2 Production Control System Objectives 18 3.3 Possible Benefits Available from

Hybrid flowshop scheduling with dual resources in a supply chain

Creator:: Mehravaran, Yasaman
Abstract:: This dissertation addresses a hybrid-flow shop scheduling problem with dual resource constraints in a supply chain. Most of the traditional scheduling problems deal with machine as the only resource. However, other resources such as labor is not only required for processing jobs but are often constrained. Considering the second resource...
Resource Type:: Dissertation
Full Text:: flowshop, or flowshop with parallel machines. By definition this extended layout has series of production

Schedule-based material requirements planning : an artificial intelligence approach

Creator:: Kim, Sunuk
Abstract:: The objective of this research project was to identify the limitations associated with schedule-based Material Requirements Planning (SBMRP) and to present a knowledge-based expert system (KBES) approach to solve these problems. In SBMRP, the basic strategy is to use backward or forward scheduling based on an arbitrary dispatching rule, such...
Resource Type:: Dissertation
Full Text:: production plan- ning for the establishment of a proper inventory control system, describing the

Heuristic algorithm for multistage scheduling in food processing industry

Creator:: Juwono, Cynthia P.
Abstract:: A multistage production system consists of a number of production stages that are interrelated, that is the output from one stage forms input to the next stage. There are constraints associated with each stage as well as constraints imposed by the overall system. Besides, there are multiple objectives that need...
Resource Type:: Masters Thesis
Full Text:: A multistage production system consists of a number of production stages that are interrelated

Component to multi-track feeder assignment and board sequencing for printed circuit board assembly

Creator:: Li, Yu-An
Abstract:: This research was motivated by the use of multi-track feeders in the printed circuit board (PCB) assembly. In a low volume, high mix production environment, setup time is usually considered more important than processing time. Implementation of multi-track feeders not only increases the capacity of the surface mount machines but...
Resource Type:: Dissertation
Full Text:: board (PCB) assembly. In a low volume, high mix production environment, setup time is usually

A Unit Manufacturing Process Characterization Methodology and Supporting Terminology for Sustainable Manufacturing Assessment

Creator:: Garretson, Ian C.
Abstract:: Manufacturing industry drives economic activity and growth around the world, but manufacturing activities consume large amounts of material, energy, and labor resources. Therefore, the impacts of manufacturing need to be accounted for and reduced. Direct benefits of manufacturing are products and income, which, in turn, influence the lives of people...
Resource Type:: Masters Thesis
Full Text:: Ratewaste rate of waste production Ratewater_use water use rate RCH4 methane production rate RCO2

ScholarsArchive@OSU

A methodology for real-time scheduling of jobs with splitting on unrelated parallel machines

The use of process fraction defective as a basis for the design of X chart sampling procedures

An approximation procedure for the allocation of inspection effort

Group-scheduling problems in electronics manufacturing

Planning and implementing a manufacturing control system in a job shop environment

Hybrid flowshop scheduling with dual resources in a supply chain

Schedule-based material requirements planning : an artificial intelligence approach

Heuristic algorithm for multistage scheduling in food processing industry

Component to multi-track feeder assignment and board sequencing for printed circuit board assembly

A Unit Manufacturing Process Characterization Methodology and Supporting Terminology for Sustainable Manufacturing Assessment

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search