Index Catalog // ScholarsArchive@OSU

Mechanically Robust Additively Manufactured Magnetically Coupled Aperture and Patch Microstrip to Rectangular Waveguide Transition

Creator:: Merrill, Scott
Abstract:: Advances in additive manufacturing technologies allow for the rapid, inexpensive manufacturing of microwave circuits. Circuits made using additive manufacturing are comparable in performance to circuits produced circuits produced using conventional methods such as printed circuit board fabrication, thin film deposition, machining, and milling. Very little work has been done in...
Resource Type:: Masters Thesis

Data Mining a Design Repository for Automating and Validating Functional Modeling

Creator:: Mikes, Alex B.
Abstract:: The purpose of this work is to build a foundation of understanding and methodologies as the steps toward automating functional modeling. We have achieved significant progress in the automatic generation of functional representations, which can be connected at the interface of components to create a functional model. This work highlights...
Resource Type:: Masters Thesis
Full Text:: collaboration. Thanks to Chris Hoyle and Matt Johnston for serving on my committee. TABLE OF CONTENTS Page 1

Reversible Covalent Immobilization of Desferrioxamine B (DFOB) on Aminated Polystyrene Beads for Citrate-Bound Fe(III) Chelation

Creator:: Touma, Jad G.
Abstract:: The immobilization of chelators to solid supports has recently gained renewed interest due to the increasing biomedical and environmental applications made possible by these molecules’ ability to bind Fe(III) and other metal ions. The uses of immobilized chelators have expanded to include the treatment of metal overload in serum, the...
Resource Type:: Masters Thesis

Modeling hop kilning with respect to energy consumption and drying kinetics

Creator:: Thomas, Matthew W.
Abstract:: Currently, little work has been performed studying energy consumption in hop kilning. This thesis explores drying with an alternative drying schedule that extends the initially elevated drying temperature currently used by growers and examines its impact on drying time and energy use. Extending the time of the initially elevated drying...
Resource Type:: Masters Thesis
Full Text:: AN ABSTRACT OF THE THESIS OF Matthew W

Phenotyping Degeneration of the Intervertebral Disc with Principal Component Analysis and K-Means Clustering

Creator:: Chen, Joseph
Abstract:: The human intervertebral disc (IVD) provides support for the vertebral bodies, allowing for movement and load bearing. The IVD can degenerate with age or injury, impeding function and causing chronic pain. Despite disc degeneration affecting over 90% of adults over age 50, and back pain being the leading global cause...
Resource Type:: Masters Thesis

The Influence of Fuel Characteristics on Smoldering Behavior through Porous Fuels

Creator:: Ross, Andrew H.
Abstract:: Smoldering can play a dangerous role in the ignition and spread of wildfires. Naturally occurring fuels consist of multiple layers of organic materials with varying particle sizes due to differences in decomposition stages with fuel depth, yet the influence of particle size on burning behavior is poorly understood. Previous research...
Resource Type:: Masters Thesis

5th-Order Elliptic LPF Using Passive Charge Compensation Technique (PCC) Design

Creator:: Tsai, Cheng H.
Abstract:: The passive charge compensation (PCC) technique was introduced for switched capacitor (SC) circuit to increase the slew rate and enhance the linearity performance, as PCC techniques are used on the Delta-Sigma modulator (DSM) in ADC circuitry. The PCC technique of the project was applied to the design of a SC...
Resource Type:: Masters Thesis
Full Text:: . I would also like to thank Prof. Alan Wang, Prof. Anne Trehu, and Prof. Matthew Johnston for

Effect of Laser Powder Bed Fusion Parameters and Hot Isostatic Pressing on the Microstructure and Mechanical Properties of C22 Alloy

Creator:: Yan, Dongqing
Abstract:: A nickel-based Hastelloy C22 powder with a nominal composition of Ni-21.30Cr-13.36Mo-1.92Co-2.94W-3.85Fe-0.23Mn-0.3V(wt%) and particle size distribution of D₁₀=23.8±0.3 μm, D₅₀=37.5±0.2μm, and D₉₀=59.3±1.1 μm was gas atomized to be used as a feedstock in Laser Powder Bed Fusion (LPBF). In this study, laser power and scanning speed were optimized to manufacture specimens...
Resource Type:: Masters Thesis
Full Text:: place. I thank my committee members, Dr. Tabei, Dr. Fan, and Dr. Johnston, for their time, feedback

Signal Enhancement in Lateral Flow Tests for Infant HIV Diagnosis

Creator:: Rodriguez, Michael A.
Abstract:: Paper-based assays for HIV diagnosis are cheap, portable, and require little to no skilled training, electricity, or expensive equipment to perform successfully. However, there is a need for tests with lower limits of detection (LOD) for diagnosing infection at the earliest stages. Effective labeling to increase signal-to-noise ratio is critical...
Resource Type:: Masters Thesis

Sputter Deposition and Characterization of Transparent Conductive Oxide Thin Films and Applications in Photonics

Creator:: Bo, Yunfei
Abstract:: Transparent conductive oxides (TCOs), combining the optical transparency and electrical conducting properties, have attracted escalating research interests in recent years due to their potential for various photonic applications. The electrical and optical properties, such as carrier concentration, mobility, will strongly affect the performance of TCO-based photonic devices. In this dissertation,...
Resource Type:: Masters Thesis
Full Text:: , and Dr. Matthew Johnston for serving on my committee. Thank you for your time and support. I

ScholarsArchive@OSU

Mechanically Robust Additively Manufactured Magnetically Coupled Aperture and Patch Microstrip to Rectangular Waveguide Transition

Data Mining a Design Repository for Automating and Validating Functional Modeling

Reversible Covalent Immobilization of Desferrioxamine B (DFOB) on Aminated Polystyrene Beads for Citrate-Bound Fe(III) Chelation

Modeling hop kilning with respect to energy consumption and drying kinetics

Phenotyping Degeneration of the Intervertebral Disc with Principal Component Analysis and K-Means Clustering

The Influence of Fuel Characteristics on Smoldering Behavior through Porous Fuels

5th-Order Elliptic LPF Using Passive Charge Compensation Technique (PCC) Design

Effect of Laser Powder Bed Fusion Parameters and Hot Isostatic Pressing on the Microstructure and Mechanical Properties of C22 Alloy

Signal Enhancement in Lateral Flow Tests for Infant HIV Diagnosis

Sputter Deposition and Characterization of Transparent Conductive Oxide Thin Films and Applications in Photonics

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search