Index Catalog // ScholarsArchive@OSU

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed.
Resource Type:: Technical Report
Full Text:: SERVICE DRYING AND CONDITIONING GLUED JOINTS - By Forest Products Laboratory, -2 Forest Servic e U .S

Creator:: Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, August 1961. Original report dated November 17, 1943.
Resource Type:: Technical Report
Full Text:: continuous soaking, continuous exposure to high humidities, and cyclic exposures to wetting and drying or

Creator:: Eickner, Herbert W. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, April 1959. Report originally issued August 18, 1942.
Resource Type:: Technical Report
Full Text:: specimens are included. Results and Discussion Effect of Pressure Period and Aging on Block Joint Shear

Creator:: Forest Products Laboratory (U.S.) and Selbo, M. L. (Magnus Leonard), 1901-
Resource Type:: Technical Report
Full Text:: in joint quality can be maintained by finger jointing than by scarf jointing, although it is not

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed October 1954.
Resource Type:: Technical Report
Full Text:: -joint area at the end of the 1- by 2-inch pieces into which they were subsequently cut. Glue B was

Creator:: Brouse, Don and Forest Products Laboratory (U.S.)
Abstract:: Published in Mechanical Engineering.
Resource Type:: Technical Report
Full Text:: microorganisms, and . (c ) mechanical stresses developed on the glue joint as the wood changes cimen- siohs under

Creator:: Browne, F. L. (Frederick Lincoln), 1895-, Brouse, Don, and Forest Products Laboratory (U.S.)
Abstract:: Published in Industrial & Engineering Chemistry, January 1929.
Resource Type:: Technical Report
Full Text:: joint should always be weaker than the adhesive i n contrast to the specific type of joint

Creator:: Truax, T. R. (Thomas Roy), 1886-, Brouse, Don, and Forest Products Laboratory (U.S.)
Abstract:: Published in Industrial and Engineering Chemistry, January 1929. Information reviewed and reaffirmed.
Resource Type:: Technical Report
Full Text:: MECHANICAL WOOD-JOINT TEST S FOR THE SELECTION OF WOODWORKING GLUE S Information Reviewed and Reaffirme d

Creator:: Forest Products Laboratory (U.S.) and Brouse, Don
Abstract:: Published in Furniture Manufacturer and Wood Products.
Resource Type:: Technical Report
Full Text:: joint by the plies as they change dimensions under the influence of changes in moisture content. In

Creator:: Forest Products Laboratory (U.S.) and Norris, Charles, B. (Charles Brazer), 1894-
Resource Type:: Technical Report
Full Text:: the restraint of the strains in the adhesive to the presence of the adherends. If a butt joint is

ScholarsArchive@OSU