Index Catalog // ScholarsArchive@OSU

Investigations concerning heat transfer involving wedge-shaped configurations

Creator:: King, John Michael
Abstract:: The temperature field inside a "truncated" wedge is investigated. For this purpose the two dimensional Green's function of the heat equation for this domain is established. Further applications of these results center around a problem of heat conduction investigated by Lebedev.
Resource Type:: Masters Thesis
Full Text:: the London Mathematical Society XVI (Ser. 2):84- 93. 1918. 3. Carslaw, H. S. and J. C. Jaeger

A numerical model of heat transfer to the atmosphere from an Arctic lead

Creator:: Shreffler, Jack H.
Resource Type:: Dissertation
Full Text:: Department) (Date) Title: A NUMERICAL MODEL OF HEAT TRANSFER TO THE ATMOSPHERE FROM AN ARCTIC LEAD

Modeling in-situ vapor extraction during flow boiling in microscale channel

Creator:: Salakij, Saran
Abstract:: In-situ vapor extraction is performed by applying a pressure differential across a hydrophobic porous membrane that forms a wall of the channel as a means of reducing the local quality of flow boiling within the channel. As the local quality is reduced, the heat transfer capability can be improve while...
Resource Type:: Dissertation
Full Text:: can be used as a basis for a regime-based vapor extraction rate model. The effects of vapor

Laminar natural convection within long vertical uniformly heated parallel-plate channels and circular tubes

Creator:: Vorayos, Nat
Abstract:: The problem of simple mathematical models of laminar natural convective flow within a long vertical parallel-plate channels and circular tubes kept at uniformly heated walls is revisited to seek a clear physical understanding of heat transfer mechanisms. A series solution method to analyze the fully developed flow and an integral...
Resource Type:: Dissertation
Full Text:: ..................................................................... 58 4.4 Mathematical Model ........................................................... 65 4.5

A study of micro-scale, fractal-like branching flow networks for reduced pumping power and improved temperature uniformity

Creator:: Alharbi, Ali Y.
Abstract:: A first generation, one-dimensional predictive model is proposed for designing heat sinks with fractal flow networks. A three-dimensional computational fluid dynamics (CFD) model is analyzed as a means for validating the model and identifying areas for improvement. Two separate CFD models were developed. One was analyzed with conjugate heat transfer...
Resource Type:: Masters Thesis
Full Text:: numbers above 150. Bau (1997) demonstrated, using a mathematical model, that a variable cross sectional

Modeling a heat regenerator-reactor with temperature dependent gas properties

Creator:: Kulkarni, Milind S.
Abstract:: This thesis examines the transient response of a packed bed heat regenerator when heated from an initial uniform bed temperature. Very large (1700 K) temperature differences were studied as well as the effect of simultaneous chemical reaction in the gas phase. First the effects of temperature on physical and transport...
Resource Type:: Masters Thesis
Full Text:: . MODELING HEAT REGENERATOR WITHOUT REACTION 13 3.1 ASSUMPTIONS 13 3.2 MODEL DEVELOPMENT 16 3.3

Heat transfer predictions for aquaculture facilities

Creator:: Geiselman, James R.
Abstract:: Recycling of water in aquaculture facilities is used to minimize the amount of energy or tempered water required to control water temperatures. The rate of heat exchange between the water and the environment can be an important variable in the design, management, and economic analysis of a recycle system. A...
Resource Type:: Masters Thesis
Full Text:: model is developed from the heat transfer relationships to simulate the primary locations of heat

Development of a heat transfer coefficient for a single mist nozzle impinging on a heated thin sheet of Alloy 304 Stainless Steel using infrared thermography

Creator:: Cadell, Seth R.
Abstract:: A purpose built facility was designed, built and operated at the Advanced Thermal Hydraulic Research Laboratory, which is located at Oregon State University. This facility was used to heat a plate of Alloy 304 Stainless Steel to 800 °C and then cool the plate using a fine mist of water...
Resource Type:: Masters Thesis
Full Text:: linear regression line over a higher order polynomial follows the concept of parsimony, where a model

Numerical analysis of liquid cooling by natural convection for heated protusions simulating vertical plate-mounted electronic components facing an opposing plate

Creator:: Park, Sung-kwan
Resource Type:: Dissertation
Full Text:: processes, includ- ing the flow and thermal fields applicable to each specific model of manufacture

Radiation from an infinite plane to parallel rows of infinitely long tubes - hottel extended

Creator:: Qualey, Douglas L.
Abstract:: A two-dimensional model for predicting the rate of radiation heat transfer for the interior of an industrial furnace is described. The model is two-dimensional due to the assumptions of the heat source as an infinite radiating plane and the heat sink as rows of parallel tubes that are both infinite...
Resource Type:: Masters Thesis
Full Text:: -dimensional model for predicting the rate of radiation heat transfer for the interior of an industrial

ScholarsArchive@OSU

Investigations concerning heat transfer involving wedge-shaped configurations

A numerical model of heat transfer to the atmosphere from an Arctic lead

Modeling in-situ vapor extraction during flow boiling in microscale channel

Laminar natural convection within long vertical uniformly heated parallel-plate channels and circular tubes

A study of micro-scale, fractal-like branching flow networks for reduced pumping power and improved temperature uniformity

Modeling a heat regenerator-reactor with temperature dependent gas properties

Heat transfer predictions for aquaculture facilities

Development of a heat transfer coefficient for a single mist nozzle impinging on a heated thin sheet of Alloy 304 Stainless Steel using infrared thermography

Numerical analysis of liquid cooling by natural convection for heated protusions simulating vertical plate-mounted electronic components facing an opposing plate

Radiation from an infinite plane to parallel rows of infinitely long tubes - hottel extended

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search