Due to a lack of grain boundaries, an amorphous metal thin film (AMTF) possesses advantageous mechanical properties and enhanced chemical stability that is potentially useful for thermal inkjet (TIJ) printing applications. The use of an AMTF as a TIJ resistor or cavitation plate could lead to a thinner TIJ cavitation...
Inkjet-printed p-type copper(I) iodide-based TFTs were successfully fabricated. As-printed copper(I) halide semiconductor films, such as CuI, CuBrI, and CuClI, were used as p-type active channel layers for TFTs. The entire process of the TFTs fabrication was maintained under 150 °C, which is compatible with flexible plastic substrates and transparent glass...
Digital printing techniques offer several advantages in manufacturing electronics such as direct writing of materials, reduction of chemical waste, and scalability. In particular, printing can significantly simplify manufacturing processes by directly defining the channel area, the gate, and the source and drain contacts, allowing for lower costs and higher throughput...
Due to the wide applications of inkjet printers in industry and our daily life, characterization of liquid droplets from inkjet printers, particularly the behaviors of the impact and diffusion of the droplets on the surface of and inside porous medium is of great interest. One conventional characterization method uses high-speed...
In this thesis the critical parameters involved in the
dislodgement and deformation of microbubbles in laminar
channel flow, are determined and evaluated. Experimentally
the effects of surface tension, viscosity, fluid flow rate,
density, and bubble diameter on bubble dislodgement were
evaluated. A theoretical scale analysis was performed which
provided a...
Droplet formation in inkjet cartridges has been studied for several decades to improve print qualities. Currents and rigid nozzle plates are used inside the cartridge to fix the size of droplets exiting the chamber. This research is focused on studying the effect of nozzle flexibility on droplet formation. A flexible...
As drop-on-demand (DOD) applications continue to gain ground in desktop inkjet-printing, 3D printing, fluid mixing, and other areas the demand for higher frequency operations are beginning to push against the current physical boundaries in DOD technology. The current research is exploring the possibility of controlling drop volume and velocity at...
A method was sought to predict the flight paths and collisions for closely spaced ink droplets of various sizes as a design aid for ink-jet printing development. Computational fluid dynamics models of two rigid aligned spheres, as a proxy for ink droplets, were initiated in atmospheric pressure air at constant...