Zinc Sulfide (ZnS) thin film, with a wide band gap, has been used for many applications, such as buffer layer for CIGS solar cells, light emitting diodes and thin film electroluminescent devices.
In this work, ZnS thin films were prepared using two different deposition processes. In the first method, ZnS...
Cobalt germanides have been widely studied as semiconductor contact materials, but recent theoretical studies suggest that they may also be excellent catalysts for methane steam reforming with stabilities and activities comparable to noble metal catalysts. In order to study the catalytic activity of cobalt germanides, it is critical to first...
The continuous microreactor-assisted solution deposition (MASD) process was used for the deposition of CdS thin films on fluorine-doped tin oxide (FTO) glass. The MASD system, including a T-junction micromixer and a microchannel heat exchanger is capable of isolating the homogeneous particle precipitation from the heterogeneous surface reaction. The results show...
Advances in energy technologies and electronics have typically occurred through either heightened performance or cost reduction. This dissertation explores both routes through a series of fundamental material studies that may contribute to the enabling of next generation devices. Solution based syntheses and deposition of chemical products offer a low cost...
BiCuOSe and SnS are layered, moderate band gap (ε[subscript G] ≈ 1 eV) semiconductors that exhibit intrinsic p type conductivity. Doping of BiCuOSe with Ca results in a slight expansion of the lattice and an increase of the hole concentration from 10¹⁸ cm⁻³ to greater than 10²⁰ cm⁻³. The large...
Piezoelectric materials convert mechanical strain into a dielectric displacement, as well as the converse, allowing these materials to be used as sensors, actuators, and transducers. Currently, lead zirconate titanate (PZT) is the primary material used in these applications. Due to environmental toxicity and safety concerns associated with Pb, development of...
Solid-state amorphous materials show amazing promise in thin-film electronics. The interface-to-bulk ratio of thin films makes interfacial chemistries of these systems of utmost importance. Thin films of amorphous metals, dielectrics and semiconductors have novel chemistries that are not only based upon their elemental constituent makeup, but also based upon the...
Copper sulfides (Cu[subscript x]S) are compound semiconductor materials that exhibit considerable optical and electrical properties varying significantly as a function of the composition. Copper sulfide thin films can be used in many applications, such as solar control coatings, solar cells, photothermal conversion of solar energy, electroconductive coatings, and microwave shielding...
Pb(Zr₀.₅₂Ti₀.₄₈)O₃ (PZT) thin films are of interest for their large dielectric permittivity, ferroelectric, and piezoelectric properties. The material has been widely studied for use in high frequency transducers, multi-layered capacitors, and ferroelectric random access memory. Copper foils are an inexpensive, flexible substrate with a low resistivity which makes them ideal...
Piezoelectric materials have been widely used in electromechanical actuators, sensors, and ultrasonic transducers. Among these materials, lead zirconate titanate Pb(Zr[subscript 1‐x]Ti[subscript x])O₃ (PZT) has been primarily investigated due to its excellent piezoelectric properties. However, environmental concerns due to the toxicity of PbO have led to investigations into alternative materials systems....