Index Catalog // ScholarsArchive@OSU

Deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate

Creator:: Forest Products Laboratory (U.S.) and Raville, Milton E.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed September 1962. Original report dated December 1955.
Resource Type:: Technical Report
Full Text:: . 1847 orthotropic core. The core is considered to have such a small load- carrying capacity in the

Stresses within a rectangular, flat sandwich panel subjected to a uniformly distributed normal load and edgewise, direct, and shear loads

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Kommers, William J., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: A UNIFORMLY DISTRIEUTED NORMAL LOAD AND EDGEWISE, DIRECT, AND WEAR LOADS January 1953 This Report

Transfer of longitudinal load from one facing of a sandwich panel to the other by means of shear in the core

Creator:: Forest Products Laboratory (U.S.), Norris, Charles, B. (Charles Brazer), 1894-, and Boller, Kenneth H.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction of the departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report issued April 1955.
Resource Type:: Technical Report
Full Text:: LOAD FROM ONE FACING OF A SANDWICH PANEL TO THE OTHER BY MEANS OF SHEAR IN THE CORE! By CHARLES B

Critical loads of a rectangular, flat sandwich panel subjected to two direct loads combined with a shear load

Creator:: Forest Products Laboratory (U.S.), Norris, Charles, B. (Charles Brazer), 1894-, and Kommers, William J.
Abstract:: Information reviewed and reaffirmed 1958. Original report issued June 1952.
Resource Type:: Technical Report
Full Text:: TWO DIRECT LOADS COMBINED WITH A SHEAR LOAD No. 1833 June 1952 INFORMATION REVIEWED AND REAFFIRMED

The bending of a circular sandwich plate under normal load

Creator:: Ericksen, Wilhelm S. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1960. Revised June 1953.
Resource Type:: Technical Report
Full Text:: Wisconsin THE BENDING OF A CIRCULAR SANDWICH 1 2PANEL UNDER NORMAL LOAD— By WILHELM S ERICKSEN

Design, analysis and evaluation of bridge superstructures for live loads

Creator:: Turan, O. Tugrul
Abstract:: Due to age, original design that is deficient by modern standards, inadequate maintenance, environmental conditions, and increasing loads, large numbers of bridges in United States and elsewhere are classified as deficient and in need of rehabilitation or replacement. According to a national bridge inventory established by the Federal Highway Administration,...
Resource Type:: Dissertation
Full Text:: should be used to reveal load carrying capacity of bridge superstructures, these methods should be

Practical modeling for load paths in a realistic, light-frame wood house

Creator:: Pfretzschner, Kathryn S.
Abstract:: The objective of this study was to develop and validate practical modeling methods for investigating load paths and system behavior in a realistic, light-frame wood structure. The modeling methods were validated against full-scale tests on subassemblies and an L-shaped house. The model of the L-shaped house was then modified and...
Resource Type:: Masters Thesis
Full Text:: ................................................... 123 APPENDIX I: MODEL VARIATIONS USED IN UPLIFT AND WIND LOAD INVESTIGATIONS

Influence of Uncertainties in Terrestrial Laser Scanning on Structural Reliability and Bridge Load Rating - Finite Element Models (FEM)

Creator:: Loving, Carly K.
Abstract:: This dataset includes the finite element models (FEMs) used for the MS Thesis entitled: Influence of Uncertainties in Terrestrial Laser Scanning on Structural Reliability and Bridge Load Rating by Carly K. Loving. These FEMs were created in SAP 2000 and contain models from both thesis manuscripts. The following lists summarizes...
Resource Type:: Dataset

Light-frame versus timber frame : a study in quantifying the differences

Creator:: Malone, Brian P.
Abstract:: The objective of this study was to compare light wood framing and traditional timber framing quantitatively through environmental impact assessment and load path analysis. This research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and the design of structures considered within reflect the general characteristics...
Resource Type:: Masters Thesis
Full Text:: through environmental impact assessment and load path analysis. This research was inspired by a

Analysis of moving loads using force-based finite elements

Creator:: Kidarsa, Adrian
Abstract:: An analysis method for moving loads computes the internal demand history in a structural member at integration points of force-based finite elements as opposed to the end forces of a refined displacement-based finite element mesh. The force-based formulation satisfies strong equilibrium of internal section forces with the element end forces...
Resource Type:: Masters Thesis
Full Text:: section forces with the element end forces and the moving load. This is in contrast with the

ScholarsArchive@OSU

Deflection and stresses in a uniformly loaded, simply supported, rectangular sandwich plate

Stresses within a rectangular, flat sandwich panel subjected to a uniformly distributed normal load and edgewise, direct, and shear loads

Transfer of longitudinal load from one facing of a sandwich panel to the other by means of shear in the core

Critical loads of a rectangular, flat sandwich panel subjected to two direct loads combined with a shear load

The bending of a circular sandwich plate under normal load

Design, analysis and evaluation of bridge superstructures for live loads

Practical modeling for load paths in a realistic, light-frame wood house

Influence of Uncertainties in Terrestrial Laser Scanning on Structural Reliability and Bridge Load Rating - Finite Element Models (FEM)

Light-frame versus timber frame : a study in quantifying the differences

Analysis of moving loads using force-based finite elements

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Contributor

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search