The exceptional feature of the brushless doubly-fed
machine is the lack of need for frequent replacement of
brushes. The inherent instability of this machine has to be
overcome for its application in adjustable speed drives and
variable speed generation systems.
Specific objectives were:
to study the characteristics of the machine...
The Brushless Doubly-Fed Machine (BDFM) has recently become an
important research topic in the field of variable-speed AC drives. In
recent studies, the BDFM has shown significant potential for improving the
reliability and performance of AC drive systems, as well as reducing total
system cost. While the BDFM offers several...
The alternators in today's automobiles are of the claw-pole or Lundell
construction, which is a readily manufactured, low-cost derivative of the conventional
rotating dc field synchronous generator. The efficiency of the Lundell system is low due
to a complicated magnetic circuit of predominantly solid steel and a high windage rotor...
An AC/AC converter has been designed and implemented for the purpose of
providing a modular drive system with a Brushless Doubly-Fed Machine (BDFM.) This
converter is to be used in laboratory testing and also as part of a demonstration system in
the field.
All hardware needed to start and run...
A brushless doubly-fed machine (BDFM) is a single-frame, self-cascaded
induction machine capable of operating in both the induction
and the synchronous modes. This thesis presents some important
advances concerning dynamic modeling, simulation and analysis of the
BDFM.
Initially, a two-axis model and its associated parameters are developed
and calculated. The...
The Brushless Doubly Fed Machine (BDFM) is receiving attention as a candidate for use in adjustable speed drives (ASDs) and variable speed generators (VSGs). With a large percentage of a drive or generator system's cost due to power electronics content, considerable research has been conducted to find drives in which...
Generation of electricity from the wind is becoming increasing popular as an
environmentally responsible resource. Current methods for generating electricity from
the wind involve the use of fixed-speed generators. However, the use of variable-speed
generators increases the amount of energy that can be extracted from the wind.
Most variable-speed technologies...
The Brush less Doubly-Fed Machine (BDFM) has the potential to be a more cost effective replacement for conventional induction or synchronous machine drives. The BDFM has two stator windings: a power winding and a control winding. An electronic power converter of variable voltage and frequency is connected to the control...
The loads on the electrical systems of automobiles are projected
to increase significantly in the near future. This will result in a
requirement for improved efficiency over the present-day car
alternators. An alternative scheme proposed at Oregon State
University employs a Brushless Doubly-Fed Machine (BDFM) as an
alternator.
This thesis...