This thesis introduces a Brushless Doubly-Fed Machine (BDFM), stand-alone
generator system. Development of a BDFM current-forced model, along with the
analysis of air gap power distribution between the two stator windings and the rotor
circuit, pave the way for the characterization and analysis of stand-alone generator
systems.
The main disadvantage...
The induction motor in its electromagnetic features
is essentially a transformer, while in its general behavior
it is analogous to the continuous-current shunt wound
motor. In a transformer the primary and secondary members
are both stationary and electrical energy is transformed
from one pressure to another by the ratio of...
Throughout the year the regular design work of the
class room proved so profitable that it was thought that
there was no subject which could be selected for thesis
purposes of greater benefit,or which offered as great a
latitude in the working out of the various problems, than
the one...
The following discussion is confined mostly to
that type of machine in which the squirrel care revolving
secondary it used. In its most primitive form it con -
listed simply of a disk- aramature as described by Baily
in 1870 and due to Tesla (1888), of the fact that two,...
The problem of the economical transmission of power has long been a serious one to the engineer. Formerly the power had to be generated on or near the spot where it was to be used, but now the advance that has been made in Electrical Engineering has largely done away...
In order that the proper motor for a given service
may be chosen it becomes necessary to study and know
the requirements and characteristics of the machine which
may be used for that purpose. When these are known the
selection of that one which is best adapted for the use...
Direct digital control is becoming quite common in the control
of industrial processes. However, due to the relatively high accuracy
of both analog and conventional digital systems for controlling the
speed of a dc motor, there has been a reluctance to try DDC for
this purpose. This thesis describes a...
A model of a squirrel cage induction machine, d.c.-
link power supply and centrifugal pump is developed and
used in the design and evaluation of a perturbation feedback
control system for a sewage pumping station. A comparison
of the simulation model of the induction machine
and a laboratory machine to...
A Brushless, Doubly Fed Machine (BDFM) attempts to combine the advantages
of conventional induction and synchronous types of electrical machines by its unique
architecture. The validation of BDFM designs in an actual test environment requires the
estimation of the BDFM model parameters from actual experimentation. Accurate values
for the parameters...
A relatively new development in the electric machines field has been the written-pole technology, of which the latest product is the large single-phase electric motor, the single phase Written-Pole Motor (WPM). The WPM is a synchronous, permanent-magnet single-phase motor having a weak rotor cage for start-up which in addition exhibits...