Anammox (anaerobic ammonium oxidation) bacteria are capable of providing low-cost nitrogen removal for numerous types of wastewaters. However, low growth rates cause long startup-times and inhibition by oxygen and metabolic substrates necessitate close process control to maintain performance. Incorporation of Simultaneous Anammox and Denitrification (SAD) into constructed wetlands could provide...
1,4-dioxane and chlorinated aliphatic hydrocarbons (CAHs) such as trichloroethylene (TCE) and 1,1-dichloroethene (1,1-DCE) are hazardous compounds commonly found in soil and groundwater. Bioremediation through aerobic cometabolism is a potential option for the remediation of these contaminated sites. The purpose of this study was to examine the use of different primary...
Methods were developed for the co-encapsulation of slow release compounds (SRC) with viable microbial cells in alginate and gellan gum hydrogel beads, for the in-situ aerobic cometabolic treatment of groundwater contaminated with mixtures of 1,4-dioxane and chlorinated aliphatic hydrocarbons, which will be referred to as contaminants of concern (CoC). The...
Metal oxide nanoparticles (MONPs) are manufactured at the greatest rate of any class of nanomaterial due to their wide variety of industrial, commercial, and environmental applications. The sustainable use of MONPs requires a balance of careful consideration of their potential negative environmental impacts with the effective exploitation of their unique...
Approximately ninety percent of urban Vietnamese households are connected to septic tanks, from which up to three-quarters of the sludge is reported to be dumped into waterways in residential areas. Vietnam has a considerable prevalence of antibiotic misuse and resultant antibiotic-resistant bacteria (ARB) in the human microbiome. Due to the...
The purpose of this research was to measure the copper-binding behavior of Dissolved Organic Matter (DOM) contained in Pulp and Paper (P&P) wastewater effluent and evaluate the Biotic Ligand Model’s (BLM) ability to quantify copper speciation in P&P influenced waters. A copper ion selective electrode was used to measure copper...
Nanoparticles (NPs), defined by their size (1-100 nm), are increasingly incorporated into commercial and industrial products due to their high surface area and unique properties. They can be designed for specific applications by manipulating composition, size, shape, and surface functionalization. As NP production and complexity increases, there is a need...
Airports are required by the Federal Aviation Administration to perform deicing of aircraft pavement during icy conditions. Until recently, there were no discharge controls in place and deicing fluid contaminated nearby water bodies from storm water runoff. EPA regulations now require airports to collect the deicing fluid and meet discharge...
Multi-phase flow in porous media includes many instances of subsurface flow. Three-phase flow in particular is important in situations of enhanced oil recovery, CO2 sequestration, and groundwater remediation. Many studies have been performed on how two fluid phases (oil/water or air/water) behave in porous media, but very few studies exist...
The epistemic practices that make up engineering are poorly understood and there is a lack of empirical research on this topic. Characterizing the epistemic practices of engineering students, faculty, and professionals is critical to creating effective curriculum that aids in developing student’s epistemic practices. Doing so allows us to better...