Two-phase flow in helical conduits is important in many industries where reaction between components, heat transfer, and mass transport are utilized as processes. The helical design is chosen for the effects of secondary flow patterns that reduce axial dispersion, increased heat transfer, and also their compact design. The first is...
Condensation Induced Water-Hammer, CIWH, has been an
historical problem for the nuclear power industry over the
past 2 decades. It has caused damage to plant systems, and
considerable anguish to plant operators. This thesis has
embarked on an attempt to characterize the fluid motion, heat
transfer, mixing, and stability of...
The topic of this thesis is to discuss an
investigation made for a fluid velocity measuring device.
The OSU thermal hydraulic testing facility is interested
in using a small probe to measure fluid velocities in the
annular region of a model nuclear reactor vessel. A
heater with a thermocouple embedded...
The Department of Nuclear Engineering at Oregon State University has performed a series of confirmatory tests for the United States Nuclear Regulatory Commission (USNRC). These tests have been conducted in the Advanced Plant Experiment (APEX) Facility which is a one quarter height scaled simulation of the Westinghouse Advanced Passive 600...
This thesis presents the assessment of the Multi Application Small Light Water Reactor (MASLWR) containment design during steady-state and transient conditions. The MASLWR project is a joint effort between Idaho National Environmental and Engineering Laboratory (INEEL), NEXANT Bechtel, and Oregon State University. The project is funded under a Nuclear Energy...
A one-sixth scaled facility was constructed at Oregon State University to determine
the pressure losses around Westinghouse's AP1000 Passive Containment
Cooling System. An explanation of the AP1000 Passive Containment Cooling System
is given. This study examined the pressure loss and loss coefficient around the
180 degree turn of the Passive...
Counter Current Flow Limitation (CCFL) was observed in the pressurizer surge line of the Oregon State University APEX facility during test NRC-10. This test simulated a one-inch diameter cold leg break with a failure of three of four of the fourth-stage Automatic Depressurization System (ADS) valves. The result was a...
Downward flow opposing mixed convection conditions have been studied using the FLUENT CFD code. This work was comprised of two primary objectives. The first was to study core channel flow reversal susceptibility in the Gas Reactor Test Section (GRTS) at low flow conditions. The second objective was the development of...
:
___________________________________________________________________
Jose N. Reyes, Jr.
Downward flow opposing mixed convection conditions have been studied
Steam interfacial condensation in a core makeup tank was simulated using the
code RELAP5/MOD3 version 8.0 to predict the violent pressure oscillation phenomena
in a core makeup tank. Six base cases were carried out to study the effects of back
pressure and of vacuum conditions produced in the core makeup...
Grain yield and grain protein are often negatively associated in
wheat. When yield increases and grain protein decreases, there can be
an adverse effect on the milling and baking quality if the desired end
product is bread flour. It has been suggested that this inverse
association is the result of...