In this research, a novel shunt compensation scheme
design procedure is developed for unbalanced, untransposed
n-phase transmission lines. The main function of the
scheme is to reduce the effect of the capacitive coupling
on untransposed transmission lines to levels where successful
single-pole switching is assured. The analysis procedure
is carried...
This is a review paper based on recent literature in the areas
of spherical mirror resonators and optical mode selection. The
Fabry-Perot interferometer with spherical mirrors has been widely
used as a laser resonator. The modes of oscillation, diffraction
losses and resonance condition are determined for the confocal
resonator, i.e....
In this paper a signal-processed antenna and receiver system is
proposed and analyzed. In addition, a simulation of the balanced-mixer portion of the processing system is made on a hybrid computer
to find the bandwidth limitations for the total system. The system
utilizes both the amplitude and phase information of...
The power dissipation of microstrip transmission-line on
gold-doped silicon substrates was investigated. The gold-doping was
applied to a regular n-type silicon substrate with resistivity of 5 to
10 ohm-cm. Insertion-loss tests were employed to measure the
power dissipation of the microstrips. Power dissipation somewhat
less than that for intrinsic silicon...
A Brushless, Doubly Fed Machine (BDFM) attempts to combine the advantages
of conventional induction and synchronous types of electrical machines by its unique
architecture. The validation of BDFM designs in an actual test environment requires the
estimation of the BDFM model parameters from actual experimentation. Accurate values
for the parameters...
The synchronous machine is an essential component of a power
system and determination of its parameters accurately is an
important task in securing adequate modes of operation through
certain control strategies. An estimation technique based on the
Powell algorithm was evaluated for the identification of these
parameters on the basis...
This thesis introduces a Brushless Doubly-Fed Machine (BDFM), stand-alone
generator system. Development of a BDFM current-forced model, along with the
analysis of air gap power distribution between the two stator windings and the rotor
circuit, pave the way for the characterization and analysis of stand-alone generator
systems.
The main disadvantage...
The exponentially tapered, nonuniform transmission'
line, applied as an impedance transformer, is analyzed and
modified. The analysis develops an expression for the input
reflection coefficient that has the magnitude and phase
as distinct functions. This allows ease in comparing the
approximate and exact solutions and in developing the S-parameters for...
The effect of the mutual inductances between the rotor coils of a synchronous machine on its defined reactances and predicted transients are investigated. Two linearized models of the machine are considered. One uses the Laplace-Transform approach, with minimum number of assumptions on the inter-coil couplings, in developing a model for...
This is a review paper of current literature in the area of
pressure effects on gaseous lasers.
This thesis discusses the mechanisms which relate the relative
power output of the 6328 A[superscript ⁰] neon transition to total and partial pressure
variations of the helium-neon gaseous laser. The operation of
the...