Index Catalog // ScholarsArchive@OSU

Torsional buckling of longitudinally stiffened, thin-walled, plywood cylinders

Creator:: Forest Products Laboratory (U.S.), Kuenzi, Edward W., and Norris, Charles, B. (Charles Brazer), 1894-
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed March 1956 and 1962. Original report issued January 1948.
Resource Type:: Technical Report
Full Text:: Laboratory Report No. 1562, "Longitudinally Stiffened Thin- walled Plywood Cylinders in Axial Compression

Effects of different methods of drilling bolt holes in wood and plywood

Creator:: Forest Products Laboratory (U.S.), Goodell, H. R., and Phillips, R. S.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: . Figure 6A shows a plywood specimen in the testing ap- paratus. The apparatus for the solid wood specimen

The buckling of flat sandwich panels with either all edges simply supported or all edges clamped

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed August 1962. Original report dated March 1948.
Resource Type:: Technical Report
Full Text:: compression . The methods of testing these coupons in this investigation were the same as thos e described in

Buckling of flat sandwich panels with all edges clamped

Creator:: Forest Products Laboratory (U.S.) and Boller, Kenneth H.
Abstract:: Information reviewed and reaffirmed August 1962. Original report dated September 1947.
Resource Type:: Technical Report
Full Text:: 5 (r) • 13IJCICLING LOADS Of HAT SANDWICH PANELS IN COMPRESSION

Buckling of flat sandwich panels with loaded edges clamped and the remaining edges simply supported

Creator:: Forest Products Laboratory (U.S.) and Boller, Kenneth H.
Abstract:: Information reviewed and reaffirmed August 1962. Original report dated September 1947.
Resource Type:: Technical Report
Full Text:: FUMING LOADS Of RAT SANDWICH PANELS IN COMPRESSION I3uctlinE of

Buckling of flat sandwich panels with loaded edges simply supported and the remaining edges clamped (Cores of end-grain balsa or cellular cellulose acetate and facings of aluminum or glass cloth laminate)

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed August 1962. Original report dated September 1947.
Resource Type:: Technical Report
Full Text:: -44T. Proposed Methods of Testing Veneer, Plywood, Wood, and Woodbase Laminated Materials. 1944

The buckling of flat sandwich panels with edges simply supported (End grain balsa cores and facings of aluminum and glass cloth laminate)

Creator:: Boller, Kenneth H. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed January 1954 and 1960.
Resource Type:: Technical Report
Full Text:: , "Supplement to Buckling of Flat Plywood Plates in Compression, Shear, or Combined Compression and Shear," by C

Various types of edge conditions

Creator:: March, H. W., Smith, C. B., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956 and 1962. Original report published in 1945.
Resource Type:: Technical Report
Full Text:: Plywood Plates in Compression I. " Reports S & M 30 (Restricted) Div. of Aeronautics, Australian Council

Effect of resin treatment and compression upon the properties of wood

Creator:: Forest Products Laboratory (U.S.), Seborg, R. M., and Stamm, Alfred J. (Alfred Joaquim), 1897-
Abstract:: Information reviewed and reaffirmed, December 1956. Original report published 1942.
Resource Type:: Technical Report
Full Text:: STATE UNIVERSITY EFFECT OF 'RESIN TREATMENT AND COMPRESSION UIPCS1Tilt PIRCPEIPTIES WOOD Information

Development of methods for evaluating the machining qualities of wood and wood-base materials

Creator:: Forest Products Laboratory (U.S.) and Davis, E. M. (Edward Manning), 1891-
Resource Type:: Technical Report
Full Text:: in other forms than lumber, such as plywood, hardboard, and particle board. !For presentation on the

ScholarsArchive@OSU

Torsional buckling of longitudinally stiffened, thin-walled, plywood cylinders

Effects of different methods of drilling bolt holes in wood and plywood

The buckling of flat sandwich panels with either all edges simply supported or all edges clamped

Buckling of flat sandwich panels with all edges clamped

Buckling of flat sandwich panels with loaded edges clamped and the remaining edges simply supported

Buckling of flat sandwich panels with loaded edges simply supported and the remaining edges clamped (Cores of end-grain balsa or cellular cellulose acetate and facings of aluminum or glass cloth laminate)

The buckling of flat sandwich panels with edges simply supported (End grain balsa cores and facings of aluminum and glass cloth laminate)

Various types of edge conditions

Effect of resin treatment and compression upon the properties of wood

Development of methods for evaluating the machining qualities of wood and wood-base materials

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search