Most specifications for ready-mix concrete (RMC) limit mixing time to 90 minutes and/or truck drum revolution counts (DRC) to 300 before discharge. These specifications have been in place for many years with the objective of ensuring the quality and performance of the finished concrete product. However, limited research has been...
This dissertation presents two high-speed pipeline successive approximation analog-to-digital converters (SAR ADCs). Capacitive DACs and resistive DACs are utilized in these two pipeline SAR ADCs, respectively.
The pipeline SAR ADC with capacitive DACs can save 50% switching power compared with other time-interleaved SAR ADCs since the total capacitance of the...
The research presented in this thesis assessed the use of high strength steel (HSS) reinforcement for use in reinforced concrete (RC) bridge columns. HSS is not currently allowed in reinforced concrete bridge columns due to a lack of information on the material characteristics and performance information when used in RC...
Successive approximation register analog-to-digital converters (SAR ADCs) have been widely used for medium-speed, medium-resolution applications due to their excellent power efficiency and digital compatibility. Recently, SAR ADCs are also penetrating into the applications which have been earlier dominated by delta-sigma ADCs and pipeline ADCs. However, the resolution of SAR ADCs...
Intuitively, it seems as though natural language processing tasks might benefit from explicit representations of the syntactic and semantic properties of text. Ontonotes is a dataset which attempts to annotate texts, to represent as much as possible of the meaning of the text explicitly within the annotation. Many tools exist...
As computation power continues to grow, the demand for data transfer bandwidth is also rising. This is reflected in the increasing data-rate of high-speed links. However, the increase in data-rate is sustainable only if the I/O energy efficiency improves as well. This dissertation explores several techniques to enable high-speed links...
Incremental ADCs (IADCs) have found wide applications in sensor interface circuitry since, compared to ∆Σ ADCs, they provide low-latency high-accuracy conversion and easy multiplexing among multiple channels. On the other hand, continuous-time ∆Σ ADCs (CTDSM) have been receiving more and more attention as a power-efficient solution in targeting medium to...
IC designers are continuously facing the challenges from reduced CMOS feature sizes and supply voltages. ADCs that deliver satisfactory resolutions/speeds while utilizing the state-of-the-art technologies to save power are in high demand. The analog circuits are more and more assisted by various digital calibration techniques to get boosted performances. This...
This dissertation presents a low-power high-resolution delta-sigma ADC. Two new architectural design techniques are proposed to reduce the power dissipation of the ADC. Compared to the conventional active adder, the direct charge transfer (DCT) adder greatly saves power by keeping the feedback factor of the active adder unity. However, the...
As more features are being integrated into mobile platforms, the demand for
long battery life during standby mode has been increasing. Light load efficiency
becomes one of essential features in today's DC-DC converter. The most effective
method to improve light load efficiency is to operate the DC-DC converter under
pulse-frequency-modulation...
This dissertation presents an incremental analog-to-digital converter (ADC) with digital digital-to-analog converter (DAC) mismatch correction. A theoretical time-domain analysis technique was developed to predict the noise performance of the incremental ADC, and a new optimization technique was proposed to minimize the output noise.
In the calibration mode, the incremental ADC...
High speed serial links are critical components for addressing the growing demand for I/O bandwidth in next-generation computing applications, such as many-core systems, backplane and optical data communications. Due to continued process scaling and circuit innovations, today's CMOS serial link transceivers can achieve tens of Gb/s per pin. However, most...
Continuous-time ΔΣ modulators are widely used in cellular handsets due to their power efficiency and inherent anti-aliasing characteristics. To achieve demanding cellular bandwidth requirements while maintaining good power efficiency, multi-bit feedback is typically used. This approach provides benefits such as lower OSR, relaxed loop filter requirements, and reduced jitter sensitivity....
In this thesis work, a design of 14-bit, 20MS/s segmented digital-to-analog converter (DAC) is presented. The segmented DAC uses switched-capacitor configuration to implement 8 (LSB) + 6 (MSB) segmented architecture to achieve high performance for minimum area. The implemented LSB DAC is based on quasi-passive pipelined DAC that has been...
Low-distortion architecture is widely used in wideband discrete-time switched-capacitor delta-sigma ADC design. However, it suffers from the power-hungry active adder and critical timing for quantization and dynamic element matching (DEM). To solve this problem, this dissertation presents a delta-sigma modulator architecture with shifted loop delays. In this project, shifted loop...
Data converters are essential interface circuits between the analog world that people live in and the digital processors that people live with. Linearity, which often is a tradeoff against other performance criteria, is one of the major performance demands from applications for both analog-to-digital converts (ADC) and digital-to-analog converters (DAC)....
As CMOS processes keep scaling down devices, the maximum operating frequencies of CMOS devices increase, and hence circuits can process very wide band signals. Moreover, the small physical dimensions of transistors allow the placing of many more blocks into a single chip, including highly accurate analog blocks and complicated digital...
Delta-sigma analog-to-digital converters traditionally have been used for low speed, high resolution applications such as measurements, sensors, voice and audio systems. Through continued device scaling in CMOS technology and architectural and circuit level design innovations, they have even become popular for wideband, high dynamic range applications such as wired and...
Nowadays, needs for wideband and high accuracy analog-to-digital converter are increasing rapidly in manifold applications such as wireless communication, digital video and other consumer electronics. Besides, low power consumption is required to have longer battery life in portable systems. CMOS technology scaling and innovative modulator topology make the implementation much...
Ultra-high-speed (>10GS/s), medium-resolution (5~6bit), low-power (<50mW) analog-to-digital converter can find it application in the areas of digital oscilloscopes and next-generation serial link receivers. There are several challenges to enable a successful design, however. First, the time-interleaved architecture is required in order to achieve over 10GS/s sampling rate, with the trade-off...
Short-range wireless communications continually attract interest from both industry and academia, and it is changing our life in every aspect in the last decade. The design of wireless transceivers is the bottleneck for variety applications, due to RF modeling inaccuracy, stringent FCC regulations over the transmitted power spectrum, interference, multi-path...
Use of high-strength steel (HSS) reinforcing bars could provide constructability and economic benefits for the construction of structures, reducing the initial and ultimately the life-cycle cost of bridge and building structural elements. This thesis summarizes work performed in a research project on the use of HSS reinforcing bars for concrete...
Phase-Locked Loops (PLLs) are essential building blocks in many communication systems. Designing high performance analog PLLs in the presence of technology imposed constraints such as leakage, poor analog transistor behavior, process variability, and low supply voltage is a challenging task. To overcome these drawbacks, digital PLLs (DPLLs) have recently emerged...
Wireless sensor networks are becoming important in several monitoring and sensing applications. Ultra low power consumption in the sensor nodes is important for extending the battery life of the nodes. In this dissertation, two low power BFSK receiver architectures are proposed and verified with prototype implementations in silicion.
A 2.4...
The ability to extract uncertainties from predictions is crucial for the adoption of deep learning systems to safety-critical applications. Uncertainty estimates can be used as a failure signal, which is necessary for automating complex tasks where safety is a concern. Furthermore, current deep learning systems do not provide uncertainty estimates,...
Chinese international students in American colleges and universities report low levels of physical activity involvement, which may limit them in terms of
realizing their full human potential (i.e., cognitively, physically, socially). The purpose of this dissertation was to investigate the psychosocial mechanisms as well as the sociocultural influences to understand...
Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are traditionally used in high quality audio systems, instrumentation and measurement (I&M) and biomedical devices. With the continued downscaling of CMOS technology, they are becoming popular in wideband applications such as wireless and wired communication systems,high-definition television and radar systems. There are two general realizations...
Desire for low-power, high performance computing has been at core of the symbiotic union between digital circuits and CMOS scaling. While digital circuit performance improves with device scaling, analog circuits have not gained these benefits. As a result, it has become necessary to leverage increased digital circuit performance to mitigate...
The production of cement and concrete results in the production of large amounts of CO₂ emissions which can have significant negative environmental impacts. Using supplementary cementing materials (SCMs) as a cement replacement is an effective solution to reduce these negative environmental impacts, as most SCMs are waste by-products from other...
Previous research has shown that using fine lightweight aggregate (FLWA) can be a promising strategy to mitigate alkali-silica reaction (ASR) in mortar and concrete. While several possible theories were proposed by researchers, discrepancies in testing methods, materials, and supporting evidence still exist. Therefore, this study was initiated. There are two...
The objective of this dissertation is to enhance the monitoring of forest ecosystems through the utilization of remotely sensed data to address the exigencies posed by the Anthropocene. On a global scale, rising temperatures and fluctuating precipitation patterns have strained forests and produced shifts in natural disturbance regimes. Additionally, the...