Oversampled data converters are becoming increasingly popular
for high-precision data conversion. There have been many
publications on oversampled analog-to-digital (A/D) converters but
relatively few on oversampled digital-to-analog (D/A) converters.
In this thesis, issues concerning the analysis and design of the
oversampled D/A converters are addressed. Simulation tools and
analytical methods...
Oversampling and noise-shaping methods for digital-to-analog (D/A) conversion have
been widely accepted as methods of choice in high performance data conversion
applications. In this thesis, the fundamentals of D/A conversion and oversampling D/A
conversion were discussed, along with the detailed analysis and comparison of the reported
state-of-the-art oversampling D/A converters....
The design of mixed-signal integrated circuits has evolved from simple analog and digital circuits operating on the same silicon substrate to the point that now we have complete system on a chip solutions for communication systems. The levels of integration needed to remain cost effective in today's integrated circuit (IC)...
Digital-to-analog converters (DACs) suffer from static and dynamic nonlinearity problems, which degrade their accuracy and performance. Mismatch errors in the analog components restrict the maximum achievable linearity.
This thesis presents various techniques for correcting these errors. It describes a correction process for the nonlinear behavior of DACs, on three different...
Decision Feedback Equalization (DFE) in a data recovery channel filters
the bit decision in the current symbol period in generating the sample at the
comparator in the subsequent clock period. The operations of sampling,
comparing, filtering the decision bits into a feedback signal, and subtraction of
that feedback signal are...
Delta-sigma data converters have gained popularity in both analog-to-digital and digital-to-analog converters (ADCs and DACs) due to their simplicity, high linearity and immunity to many analog circuit imperfections. These data converters include features such as oversampling, noise-shaping, and (historically) single-bit quantization. Single-bit converters are preferred for their inherent linearity. This...
Delta-sigma modulators are currently a very popular technique for making high-resolution
analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).
These oversampled data converters have several advantages over conventional Nyquist-rate
converters, including an insensitivity to many analog component imperfections, a
simpler antialiasing filter and reduced accuracy requirements in the sample and hold....
In this thesis work, a design of 14-bit, 20MS/s segmented digital-to-analog converter (DAC) is presented. The segmented DAC uses switched-capacitor configuration to implement 8 (LSB) + 6 (MSB) segmented architecture to achieve high performance for minimum area. The implemented LSB DAC is based on quasi-passive pipelined DAC that has been...
Digital-to-analog converters (DACs) with wide dynamic range and high
linearity are required for high-end audio applications. A multi-bit delta sigma
audio DAC, using a novel gain-correction technique, is described in this thesis. For
widely varying on-chip RC time constant, the DAC gain can be accurately
controlled by the correction circuitry....
Delta-sigma modulators are currently a very popular technique for making high-resolution
analog-to-digital and digital-to-analog converters (ADCs and DACs). Most
delta-sigma modulators in production today employ single-bit quantization because a 1-bit DAC is inherently linear, whereas a multi-bit DAC is not. Were it not for this drawback,
the use of multi-bit...
This thesis proposes a novel fully digital technique for the estimation and correction of the DAC error in multi-bit delta sigma ADCs. The structure of the DAC error is indicated through a simple model for unit-element based DACs. The impact of the DAC error on the performance of ADC is...
Delta-sigma modulators are currently a very popular technique for making high-resolution
analog-to-digital and digital-to-analog converters. These oversampled data
converters have several advantages over conventional Nyquist-rate converters, including
an insensitivity to many analog component imperfections, a simpler antialiasing filter and
reduced accuracy requirements in the sample and hold. Though the initial...
Recently, continuous-time ΔΣ modulators are appearing increasingly often in both the literature and the marketplace due to their features of inherent antialiasing and relaxed requirements for opamp and so on. However, several nonideal factors such as clock jitter, excess loop delay, inter-symbol interference and so on, degrade the SNR performance...
The design of a 10-bit pipelined charge redistribution DAC employing MOSCAPs biased in their accumulation mode is presented in this thesis. A switched capacitor filter and output buffer have also been designed for the system. The effect of MOSCAP nonlinearity on the performance of the pipelined charge redistribution DAC has...
Data converters are essential interface circuits between the analog world that people live in and the digital processors that people live with. Linearity, which often is a tradeoff against other performance criteria, is one of the major performance demands from applications for both analog-to-digital converts (ADC) and digital-to-analog converters (DAC)....
This dissertation presents an incremental analog-to-digital converter (ADC) with digital digital-to-analog converter (DAC) mismatch correction. A theoretical time-domain analysis technique was developed to predict the noise performance of the incremental ADC, and a new optimization technique was proposed to minimize the output noise.
In the calibration mode, the incremental ADC...
Enabled by continued device scaling in CMOS technology, more and more functions that were previously realized in separate chips are getting integrated on a single chip nowadays. Integration on silicon has opened the door to new portable wireless applications, and initiated a widespread use of these devices in our common...
A power inverter, or inverter, is an electronic device or circuitry that converts direct currents (DC) to alternating currents (AC) in the power electronics family. A three-phase inverter converts DC current to three-phase AC current. Inverters, especially three-phase inverters, have been widely used in many fields including renewable energy applications...
With the growing demand for portable/consumer electronics, such as digital
audio/video (AV), the downscaling of device dimensions, which enables the
integration of an increasing number of transistors in a single chip, is mandatory.
This trend also continuously pushes the power supply voltage down to reduce the
power consumption and improve...
The resolution of analog-to-digital converters can be distinguished as absolute resolution, or average resolution. This study reviews average resolution enhancement techniques and proposes a method which is particularly applicable as a low-cost modification to a high-speed waveform acquisition system. This method uses oversampling combined with computationally simple digital filtering to...
This thesis describes the development of a flash analog-to-digital converter based on
current-mode technique. The advantages of current -mode technique are higher speed,
smaller chip area, and simple division of reference current based on current mirror. A
current-mode comparator is designed consisting of a cascode current mirror and a
current...
This thesis presents the design of a 10 bit Analog to
Digital Converter which consists of a 6 bit flash followed
by a 4 bit pipeline architecture. The total system is
described and the 4 bit pipeline is implemented on a bipolar
process.
The objective of this research is to...
In an industrial and consumer electronic marketplace that is increasingly demanding greater real-world interactivity in portable and distributed devices, analog to digital converter efficiency and performance is being carefully examined. The successive approximation (SAR) analog to digital converter (ADC) architecture has become popular for its high efficiency at mid-speed and...
A radix-based calibration technique was previously proposed with a two-stage algorithmic analog-to-digital converter (ADC). The objective of this work is to verify the capability of radix-based calibration for a true multi-stage ADC. In order to prove the idea, a single bit-per-stage, 20-stage pipelined ADC is designed in a 0.35-μm CMOS...
Utilizing a two-capacitor topology, the digital implementation of an audio-band successive-approximation analog-to-digital converter (ADC) is explored in the context of mismatch-shaping where the mismatch estimates are accurate to the first order. A second-order Δ∑ loop was found to be effective in system simulations given a 0.1% capacitor mismatch. Spectral analysis...
Two aspects of ADC system performance are addressed in this work. First, the combination of the ADC and its associated reference are co-designed for an energy constrained remote sensing system. Second, sampling linearity is mathematically analyzed as a function of frequency to provide enhanced understanding into an ADC's requisite sampling...
As advanced wired and wireless communication systems attempt to achieve higher performance, the demand for high resolution and wide signal bandwidth in their associated ADCs is strongly increased. Recently, time-domain quantization has drawn attention from its scalability in deep submicron CMOS processes. Furthermore, there are several interesting aspects of time-domain...
Analog to digital converters (ADCs) are a critical part of communication between the physical world and the increasingly digital systems humans use every day. ADCs have inherent non-idealities that degrade performance. Nonlinearity is one of the most prevalent non-idealities that designers face. While calibration methods for nonlinearity exist in the...
A procedure for automating the design and layout of analog-to-digital converters (ADCs) is presented. This procedure makes use of the existing synthesis and place-and-route tools that are common in digital circuit design. A method for adding rudimentary analog cells to the standard library is described, allowing the designer to synthesize...
Nowadays, needs for wideband and high accuracy analog-to-digital converter are increasing rapidly in manifold applications such as wireless communication, digital video and other consumer electronics. Besides, low power consumption is required to have longer battery life in portable systems. CMOS technology scaling and innovative modulator topology make the implementation much...
Continues-Time (CT) Delta-Sigma (ΔΣ) Analog-to-Digital Converters (ADCs) have one important constrain, namely the excess loop delay. Most previous excess lop delay compensation methods need to know the exact value of the excess loop delay in advance. However, the value of the excess loop delay is a uniformly distribution random variable....
IC designers are continuously facing the challenges from reduced CMOS feature sizes and supply voltages. ADCs that deliver satisfactory resolutions/speeds while utilizing the state-of-the-art technologies to save power are in high demand. The analog circuits are more and more assisted by various digital calibration techniques to get boosted performances. This...
Incremental ADCs (IADCs) have many advantages for low-frequency high-accuracy data conversion—they are easy to multiplex between channels, need simpler digital decimation filter, and allow extended counting with a Nyquist-rate ADC. A single-loop incremental ADC was designed and fabricated in 90 nm for a biosensor interface circuit. It incorporates one integrator,...
Oversampled delta-sigma modulation is one of the widely used A/D conversion
techniques for narrow bandwidth signals. In this study several new lowpass and
bandpass delta-sigma modulator architectures as well as novel pseudo-N-path integrators
that can be used in implementing these architectures are proposed.
By using multiplexing techniques the new lowpass...
The precise measurement of a capacitance difference or ratio in a digital form is
very important for capacitive sensors, for CMOS process characterization as well as for the
realization of precise switched-capacitor data converters, amplifiers and other circuits
utilizing ratioed capacitors. This thesis introduces design techniques for on-chip capacitor
ratio...
In this dissertation, a new Δ∑ A/D converter is presented that is ideally suited for communication applications. It is based on a single-loop single-stage structure, which can realize a high maximum out-of-band quantization noise gain while maintaining stable operation and thus achieve 14-bit resolution at 8 times oversampling. A fifth-order...
Delta-sigma analog-to-digital converters traditionally have been used for low speed, high resolution applications such as measurements, sensors, voice and audio systems. Through continued device scaling in CMOS technology and architectural and circuit level design innovations, they have even become popular for wideband, high dynamic range applications such as wired and...
There is a significant need in recent mobile communication and wireless broadband
systems for high-performance analog-to-digital converters (ADCs) that have wide
bandwidth (BW>5-MHz) and high data rate (>100-Mbps). A delta-sigma ADC is
recognized as a power-efficient ADC architecture when high resolution (>12-b) is
required. This is due to several advantages...
Pipeline analog-to-digital converters (ADCs) have long been used in high-speed systems for power-efficient data conversion. Broadband communication and video processing systems are placing high demands on converter accuracy and speed (above 14 bits and in the multiple-MHz range). The increasing converter requirements coupled with lower supply voltages in modern processes...
This thesis proposes a novel technique for the design of pipelined and cyclic ADCs utilizing generalized radix gain stages. Several models have been proposed for the optimization of high performance pipelined ADCs by various researchers. This work builds upon them, using a simple but accurate model to estimate the optimal...
A new approach to oversampled delta-sigma A/D converters ( AZ modulators ) is introduced, where a differential pseudo-Npath filter stage is used as a basic cell. In this band-pass application, the z to -zN transformation is employed to realize a RAM-type pseudo-2-path lossless integrator. The bandpass second-order and 4th-order delta-sigma...
With the ever-increasing demand for portable devices used in applications
such as wireless communication, mobile computing, consumer electronics, etc.,
the scaling of the CMOS process to deep submicron dimensions becomes more
important to achieve low-cost, low-power and high-performance digital systems.
However, this downscaling also requires similar shrinking of the supply...
Incremental ADCs (IADCs) have found wide applications in sensor interface circuitry since, compared to ∆Σ ADCs, they provide low-latency high-accuracy conversion and easy multiplexing among multiple channels. On the other hand, continuous-time ∆Σ ADCs (CTDSM) have been receiving more and more attention as a power-efficient solution in targeting medium to...
Recent publications show that successive approximation register (SAR) analog to digital converters (ADC) are capable of achieving high efficiency over other ADC topologies. Furthermore, techniques have been adopted to process signals with low activity periods, such as biomedical and industrial sensors. Prior work used least- significant bit first quantization (LSBFQ)...
Modern day CMOS processes are characterized by voltage scaling and geometry scaling. Geometry scaling helps reduce gate delays, thereby aiding in the design of data converters which use time based processing. Another artifact of geometry scaling is the increase in complexity of digital circuitry available on traditional analog ICs, as...
Oversampling analog-to-digital and digital-to-analog converters are gaining more
popularity in many signal processing applications. Delta-sigma modulators are used in practical applications of oversampling systems because of their apparent practical advantage over other oversampling converters in terms of insensitivity to the inevitable imperfection of the analog circuitry.
In Δ∑ modulators, analog...
Multi-level decision feedback equalization (MDFE) is a sampled signal processing technique for data recovery from magnetic recording channels which use the 2/3(1,7) run length limited code. The key adaptive feedback loops in MDFE are those which perform the timing recovery, gain recovery, dc offset detection, and adaptive equalization of the...
Data converters are ubiquitous building blocks of a signal chain. The rapid increase in
communication and connectivity devices presents new avenues for pushing the state of
the art analog to digital converters. Techniques for improving resolution, bandwidth,
linearity and bit-error rate, while reducing the power, energy and area is the...
Time-domain data conversion has recently drawn increased research attention for its highly digital nature in favor of process technology scaling. Also, as the time information being carried by binary voltage, time-domain operation is much less sensitive to voltage noise compared to conventional voltage domain operation. However, for analog-to-digital converter (ADC)...
This dissertation presents two high-speed pipeline successive approximation analog-to-digital converters (SAR ADCs). Capacitive DACs and resistive DACs are utilized in these two pipeline SAR ADCs, respectively.
The pipeline SAR ADC with capacitive DACs can save 50% switching power compared with other time-interleaved SAR ADCs since the total capacitance of the...
Ultra-high-speed (>10GS/s), medium-resolution (5~6bit), low-power (<50mW) analog-to-digital converter can find it application in the areas of digital oscilloscopes and next-generation serial link receivers. There are several challenges to enable a successful design, however. First, the time-interleaved architecture is required in order to achieve over 10GS/s sampling rate, with the trade-off...
Voltage controlled oscillator (VCO) based ADC is an important class of time-domain ADC that has gained widespread acceptance due to their several desirable properties. VCO-based ADCs behave like an open-loop continuous time ΔΣ modulator and achieve excellent resolution by first order noise shaping the quantization error. However, the SNDR of...
The advance of digital IC technology has been very fast, as shown by rapid development of DSP, digital communication and digital VLSI. Within electronic signal processing, analog-to-digital conversion is a key function, which converts the analog signal into digital form for further processing. Recently, low-voltage and low-power have become also...
This thesis describes compensation techniques for cascaded delta-sigma A/D
converters (ADCs) and high-performance switched-capacitor (SC) circuits. Various
correlated-double-sampling (CDS) techniques are presented to reduce the effects of the
nonidealities, such as clock feedthrough, charge injection, opamp input-referred noise and
offset, and finite opamp gain, in SC circuits. A CDS technique...
The design of a switched capacitor successive approximation A/D converter is discussed in this thesis. This design adopts a novel capacitance mismatch error cancellation algorithm proposed in references [25, 27]. Detailed charge domain analysis is given in this thesis, which results in an improvement of the proposed algorithm by tracing...
A differential current-mode track-and-hold (T/H) amplifier is used to sample an analog input signal. A new closed-loop current-mode architecture has been developed that overcomes the stability problems associated with closed-loop architectures. The T/H circuit has been fabricated in a 0.35-μm quad-metal, double-poly CMOS process. The measured total harmonic distortion (THD)...
Pipelined analog to digital converters (ADCs) are very important building blocks in many electronic systems such as high quality video systems, high performance digital communication systems and high speed data acquisition systems. The rapid development of these applications is driving the design of pipeline ADCs towards higher speed, higher dynamic...
This thesis presents a novel algorithmic A/D converter to be used in a biosensor. The converter is capable of a conversion rate of 1.5 bits/phase and hence the required conversion time is reduced. The proposed architecture is analyzed for non-ideal effects and compared with existing algorithmic A/D architectures. The converter...
Delta-sigma analog-to-digital converters (ADCs) are suitable for many applications due to several advantages such as relaxed anti-aliasing filter, high signal-to noise and distortion ratio (SNDR) and most important of all, reduced sensitivity to
analog imperfections.This thesis introduces several structures to overcome loop imperfections and stability issues in delta-sigma modulators. First,...
High speed and high resolution analog-to-digital converter is a key building block for broadband wireless communications, high definition video applications, medical images and so on. By leveraging the down scaling of the latest CMOS technology and the noise shaping properties, delta-sigma (ΔΣ) ADCs are able to achieve wide-band operation and...
The objective of this work is to explore the feasibility of replacing conventional op-amps with inverters in switched-capacitor (SC) circuits. In order to verify the idea, a low-pass filter (LPF) and a second-order delta-sigma (∆Σ) analog-todigital converter (ADC) are designed in the 0.5-m CMOS technology. The low-pass filter structure is...
Multi-Gigahertz sampling rate Analog-to-Digital Converters (ADC) with 5-8 bits resolution are used in many signal communication applications. Unfortunately, the performance of the high speed ADC is limited by the timing accuracy of the sampling clock. A small sampling uncertainty can cause a large error in the sampled voltage and result...
For today’s ubiquitous portable devices, innovative integrated circuits with high performance
yet very low power are necessary. As these devices are used to communicate and sense real world signals in the environment, analog-to-digital converters (ADC) and systems are the key interface circuits needed to digitize the sensed information and they...
Sensors find a variety of applications in portable electronics, automotive and biomedical solutions. The demand for low power and high dynamic range makes the design of digital sensor readout circuits quite challenging. Traditionally, these circuits are realized using amplifiers with passive feedback or precision analog comparators which are power hungry...
Multi-stage delta-sigma (ΔΣ) architectures, commonly known as MASH, are the preferred choice for analog-to-digital converters (ADCs) used in broadband communication applications, where high-resolution (above 14 bits) and high-bandwidth (several MHz) performances are required. Current state-of-the-art designs are capable of as much as 5-MS/s output data rates with 90-dB SNR. However,...
Analog-to-Digital Data Converters (ADCs) used in instrumentation and measurements often require high absolute accuracy, including excellent linearity and negligible dc offset. Incremental data converters (IDCs) provide a solution for such measurement applications. Since IDCs are essentially delta-sigma converters with reset operation before each conversion, they retain most of the advantages...
Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are widely used in wireless transceivers. Recently, continuous-time (CT) ΔΣ ADCs gain growing interest in wireless applications for their lower power consumption and wider input bandwidth as compared with the discrete-time (DT) counterparts.
In this thesis, a wideband low-power CT ΔΣ modulator for next generation...
High performance multi-cell delta-sigma modulators are a preferred choice in applications which require programmability. Multi-cell delta-sigma modulators with M unit cells provide 10log10(M) SQNR improvement for the same thermal noise and bias power due to the uncorrelated quantization noises of the M unit ADCs. This concept is used in this...
In recent years, there has been growing interest in both industry and academia to use continuous-time (CT) Δ-Σ A/D converters for wideband wireless and wireline communication applications.
So far no reported CT Δ-Σ A/D modulator achieves 14-bit or higher dynamic range (DR) with more than 2MHz signal bandwidth (equivalently 4MS/s)....
This dissertation presents a low-power high-resolution delta-sigma ADC. Two new architectural design techniques are proposed to reduce the power dissipation of the ADC. Compared to the conventional active adder, the direct charge transfer (DCT) adder greatly saves power by keeping the feedback factor of the active adder unity. However, the...
Low-distortion architecture is widely used in wideband discrete-time switched-capacitor delta-sigma ADC design. However, it suffers from the power-hungry active adder and critical timing for quantization and dynamic element matching (DEM). To solve this problem, this dissertation presents a delta-sigma modulator architecture with shifted loop delays. In this project, shifted loop...
VCO-based ADCs have recently emerged as attractive alternative to conventional DeltaSigma (ΔΣ) modulator architectures. Few salient features of a VCObased ADC are: 1) the quantization noise is 1st order noise shaped, 2) it is an open loop architecture, and, 3) its implementation is mostly digital in nature. Hence, they are...
In this dissertation, time-based signal processing techniques and their applications in oversampling and noise-shaping data converters are examined. These techniques demonstrate the ability to shift the burden of high performance analog circuits from the compressed voltage-domain to the augmented time-domain. First, the potential of high order noise-shaping and phase-domain feedback...
Oversampled analog-to-digital (A/D) converter architectures have been receiving
increased attention for high-precision A/D converters. These architectures offer the
means of exchanging resolution in time for that in amplitude. Among these
oversampled A/D converters, delta-sigma modulators are the most popular method
used due to their simplicity in the analog circuitry. The...
Multi-level decision feedback equalization (MDFE) is an effective sampled signal processing technique to remove inter-symbol interference (ISI) from disk read-back signals. Parallelism which doubles the symbol rate can be realized by utilizing the characteristic of channel response and decision feedback equalization algorithm.
A mixed-signal IC implementation has been chosen for...
Continuous process scale-down and emerging markets for low-power/low-voltage mobile systems call for low-voltage analog integrated circuits. Switched-capacitor (SC) circuits are the building blocks for analog signal processing and will encounter severe overdrive problems when operating at low voltage conditions. There exist three techniques to solve the problem, but with their...
Continuous process scale-down and emerging markets for low-power/low-voltage mobile systems call for low-voltage analog integrated circuits. Switched-capacitor circuits are the building blocks for analog signal processing and will encounter severe overdrive problems when operating at low-voltage conditions. There are several well-known techniques to bypass the problem. These approaches include: (1)...
In this thesis, a novel Direct-Charge-Transfer (DCT) integrator structure is proposed, which can settle much faster than regular switch-capacitor integrators. A new Spread-Spectrum Dynamic Element Matching (SS-DEM) algorithm is also introduced, which can effectively spread or shape the nonlinearity error of multi-bit DAC in the feedback path, thus improve the...
As CMOS processes keep scaling down devices, the maximum operating frequencies of CMOS devices increase, and hence circuits can process very wide band signals. Moreover, the small physical dimensions of transistors allow the placing of many more blocks into a single chip, including highly accurate analog blocks and complicated digital...
Advances in electronic systems have lead to the demand for high resolution, high bandwidth Analog-to-Digital Converters (ADCs). Oversampled ADCs are well- known for high accuracy applications since they benefit from noise shaping and they usually do not need highly accurate components. However, as a consequence of oversampling, they have limited...
Advances in process technologies have led to the development of low-power high speed digital signal processing blocks that occupy small areas. These advances are critical in the development of portable electronic devices with small feature size and long battery life. However, the design of analog and mixed-signal
building blocks, especially...
This thesis describes circuit architectures and techniques that facilitate the
automatic synthesis and fabrication of analog-to-digital converters (ADCs). Since
automated synthesis already exists for digital circuits and is part of the digital
circuit design flow, this work demonstrates the feasibility of ADC synthesis with
little or no modification to presently...
The exponential rate of advances in modern communication devices in the last several years have brought us higher levels of functionality and performance as well as reductions in physical size and power consumption. To continue this rate of advancement, next generation systems require wider bandwidth and higher resolution ADCs. Additionally,...
Recently, delta-sigma modulation has become a widely applied technique for high-performance analog-to-digital conversion of narrow-band signals. Most of the early designs used discrete-time structure for good accuracy and good linearity. The transfer functions are independent of the clock frequency. However, high unity-gain bandwidths of the opamps are required to satisfy...
Although the digital revolution can realize many of past analog components in the digital forms, our world is surrounded with analog signals such as voice, temperature, etc. The bridge between these two worlds is one of key performance limitations among overall systems and it includes analog filters and data converters....
The demand for portable electronic systems and the continued
down-scaling of device dimensions resulted in rapid improvement in
the performance of integrated systems. Several low-voltage design
techniques have been proposed to operate analog circuits with sub-1V
supply. However, these techniques require higher power consumption
to achieve large dynamic range while...
Delta-Sigma Modulator-based Analog-to-Digital converter design is an active area of research. New topologies require extensive simulations to verify their performance. A series of improvements were made to an existing circuit simulation package in order to speed the simulation process for the designer. Various examples of these improvements are presented in...
Evolution of the mobile communication standards and proliferation of hand-held devices mandate stringent Analog-to-Digital Converter (ADC) specifications. Among various ADCs, a ∆Σ ADC is best known as a power-efficient ADC when more than 12b is required. However, a conventional discrete-time (DT) ∆Σ Modulator (∆ΣM) is inadequate for low-power wideband applications...
The most accurate method for performing analog signal processing in MOS (metal-oxide-semiconductor) integrated circuits is through the use of switched-capacitor circuits. A switched-capacitor circuit operates as a discrete-time signal processor. These circuits have been used in a variety of applications, such as filters, gain stages, voltage-controlled oscillators, and modulators. A...
Delta-Sigma (ΔΣ) analog-to-digital converters (ADCs) are traditionally used in high quality audio systems, instrumentation and measurement (I&M) and biomedical devices. With the continued downscaling of CMOS technology, they are becoming popular in wideband applications such as wireless and wired communication systems,high-definition television and radar systems. There are two general realizations...
Digitally controlled switching DC-DC converters have recently emerged as an attractive alternative to conventional switching converters based on analog control techniques. This research focuses on eliminating the issues associated with the state of the art switching converters by proposing three novel control techniques: (1) a digitally controlled Buck-Boost converter uses...
A DC-to-DC power converter was designed on the
basis of pulse-area modulation which is applied to a
series-resonant circuit with internal frequency of 10 Khz
The series-resonant circuit was placed directly in the
energy path which provides a means for the thyristors to
be naturally commutated.
The design was tested...
Recently, switched capacitor DC/DC converters are extensively used in portable electronic devices because they feature many advantages, such as high efficiency, small package, low quiescent current, minimal external components and low cost. In this thesis, two step-down switched capacitor DC/DC converters are designed. One has the fixed output options 1.5V,...
This thesis presents a low power DC-DC converter suitable for harvesting energy from high impedance thermoelectric generators (TEGs) for the use in body powered electronics. The chip has been fabricated in a 130nm CMOS technology. To meet the power demands of body powered networks, a novel dual-path architecture capable of...