Index Catalog // ScholarsArchive@OSU

Gluing characteristics of chinquapin, tanoak, California laurel, madrone

Creator:: Olson, W. Z. and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed 1960. Original report dated March 1955.
Resource Type:: Technical Report
Full Text:: species from the eastern States. To promote closer utilization of hardwood species native to the area, the

Exploratory tests on machining and related properties of fifteen tropical American hardwoods

Creator:: Forest Products Laboratory (U.S.) and Davis, E. M. (Edward Manning), 1891-
Resource Type:: Technical Report

Machining of madrone, California laurel, tanbark oak, and chinquapin

Creator:: Forest Products Laboratory (U.S.) and Davis, E. M. (Edward Manning), 1891-
Abstract:: Published in the California Lumber Merchant, December 15, 1947.
Resource Type:: Technical Report

Machining and related characteristics of Southern hardwoods

Creator:: Davis, E. M. (Edward Manning), 1891-
Resource Type:: Technical Report
Full Text:: yardstick available the hardwood use r can undertake with assurance the use of new woods . The study also

Development of improved structural epoxy-resin adhesives and bonding processes for metal

Creator:: Forest Products Laboratory (U.S.), Black, John M., and Blomquist, Richard Frederick, 1912-
Abstract:: Information reviewed and reaffirmed 1959. Original report dated October 1954.
Resource Type:: Technical Report
Full Text:: BONDING PROCESSES FOR METAL October 1954 iiiI-ORNIATION REVIEWED AND REAFFIRMED 1959 No. 2008

Grinding pretreated hardwoods : experiments on quaking aspen, sweetgum, red alder, black tupelo, sugar maple, red oak, and cottonwood

Creator:: Hyttinen, Axel, Schafer, Earl R., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: before grinding increased the freeness and the long fiber fraction of several hardwood groundwood pulps

Sulfite pulps from several southern hardwoods

Creator:: McGovern, John Neilson, 1908-, Keller, Eugene L., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: digestions were made with indirect steam. ' The results from the southern hardwood digestions, as well as

Experiments on the gluing of wood treated with oil solutions of chlorophenols

Creator:: Forest Products Laboratory (U.S.), Kaufert, Frank H. (Frank Henry), 1905-, and Hutchins, W. F.
Abstract:: Information reviewed and reaffirmed March 1956. Original report dated May 1945. In cooperation with the Office of Production Research and Development of the War Production Board.
Resource Type:: Technical Report
Full Text:: tests and part of this was sanded before gluing in the same manner as the treated material. Testing

The grinding of hardwoods : Experiments on eastern cottonwood, yellow-poplar, sugar maple, black tupelo, white ash, birch, and sweetgum

Creator:: Hyttinen, Axel, Schafer, Earl R., and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: with six of the untreated hardwood groundwoods and toweling paper was made containing the untreated and

Effect of surface treatment on the adhesive bonding properties of magnesium

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: THE ADHESIVE BONDING PROPERTIES OF MAGNESIUM1' By H. W. EICKNER, Chemical Engineer Forest

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces (Part A - Additional tests on anodized aluminum and on zinc-chromate-primed magnesium)

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: • • ADHESIVE BONDING PROPERTIES OF VARIOUS METALS AS AFFECTED BY CHEMICAL AND ANODIZING TREATMENTS OF THE

General survey of data on the reliability of metal-bonding adhesive processes

Creator:: Eickner, Herbert W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: UI GENERAL SURVEY CIF DATA ON TEE PELIAPILITY CIF METAL-BONDING

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Revised April 1954. Addendum added. Supplement available with revisions. No. 1842A
Resource Type:: Technical Report
Full Text:: of 50 pounds per square inch. Testing Three of the lap-joint panels prepared with each bonding

Adhesives for bonding wood to metal

Creator:: Forest Products Laboratory (U.S.), Eickner, Herbert W., and Blomquist, Richard Frederick, 1912-
Resource Type:: Technical Report
Full Text:: ADHESIVES FOR BONDING WOOD TO 11ETkL) By H. W. EICKNER, Engineer and R. F. BLOMQUIST, Chemist Forest

Collection, storage, and germination test for forest tree seeds with special reference to seeds of important Oregon hardwoods

Creator:: Shiley, William A.
Resource Type:: Undergraduate Thesis
Full Text:: collection, storage, and procedure in testing seeds, this infornation was incorporated into the thesis

Foreign woods frequently imported into the United States

Creator:: Forest Products Laboratory (U.S.)
Resource Type:: Technical Report

Effect of width and thickness of laminations in laminated white oak beams upon the strength and durability of the glue bond

Creator:: Forest Products Laboratory (U.S.) and Selbo, M. L. (Magnus Leonard), 1901-
Resource Type:: Technical Report

Effective Bonding Parameters for Hybrid Cross-Laminated Timber (CLT)

Creator:: Larkin, Blake
Abstract:: Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America. CLT products must be certified for structural...
Resource Type:: Masters Thesis
Full Text:: Wood Science presented on March 22, 2017. Title: Effective Bonding Parameters for Hybrid Cross

Wood-adhesive bondline analyses with micro x-ray computed tomography

Creator:: Paris, Jesse Loren
Abstract:: There is no doubt that adhesive penetration plays an important role in wood bondline joint performance and durability; yet, to date there is no direct experimental evidence linking penetration depth with bond performance. This is, in part, because adhesive penetration is commonly assessed with various 2D microscopy techniques that are...
Resource Type:: Dissertation

Development of formaldehyde-free wood adhesives

Creator:: Peshkova, Svetlana
Abstract:: Wood adhesives are essential components of wood composites. At present, the commonly used wood adhesives, phenol-formaldehyde (PF) and urea-formaldehyde (UF) resins, are petroleum-based synthetic resins that may result in emission of formaldehyde in the production and use of wood composites. Because the world's oil reserves are naturally limited and formaldehyde...
Resource Type:: Masters Thesis
Full Text:: machine. Mr. Milo Clauson for advising and helping with the mechanical testing. My minor professor Dr

Effect of clamp spacing on the quality of glue bond in laminated White Oak timbers glued with an intermediate-temperature-setting phenol-resin glue

Creator:: Forest Products Laboratory (U.S.) and Selbo, M. L. (Magnus Leonard), 1901-
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: chamber heated at 210° F. with 80 percent relative humidity for 18 hours. Testing The glued beams were

High-yield sulfate and soda semichemical pulps from selected southern hardwoods and southern yellow pine for the production of paperboards

Creator:: Bray, Mark W., Martin, J. Stanley, and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: hardwood species were logged in Phillips County, Arkansas. This region of the Delta supports almost pure

Multi-scale Investigation of Adhesive Bond Durability

Creator:: McKinley, Paige Elizabeth
Abstract:: Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of...
Resource Type:: Masters Thesis
Full Text:: ..................................................................................................20 3.1.3 Bonding Procedure

Rate of development of joint strength by four resin glues on eight species of wood

Creator:: Olson, W. Z., Bruce, H. D., Soper, V. R., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: glue line. After wetting, the specimens were tested at once in a standard plywood-joint- testing

Development of adhesives with improved heat resistance in bonds of stainless steel

Creator:: Forest Products Laboratory (U.S.), Black, John M., and Blomquist, Richard Frederick, 1912-
Abstract:: This report issued in cooperation with the Bureau of Naval Weapons, Department of the Navy.
Resource Type:: Technical Report
Full Text:: -resistant bonding agents for stainless steel. Attempts to improve the strength of the polyamide-melamine

A study of methods for preparing clad 24S-T aluminum-alloy sheet surfaces for adhesive bonding : part III. effect of cleaning methods on resistance of bonded joints to salt-water spray

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed March 1956 and 1962. Original report issued December 1950.
Resource Type:: Technical Report
Full Text:: SURFACES FOR ADHESIVE !BONDING PART III. EFFECT OF CLEANING METHOD ON RESISTANCE OF BONDED JOINTS TO SALT

A study of methods for preparing clad 24S-T3 aluminum-alloy sheet surfaces for adhesive bonding

Creator:: Forest Products Laboratory (U.S.), Eickner, Herbert W., and Schowalter, W. E.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: day that this bonding process was being used in investigating methods of cleaning. Testing The two

Statistical variations in the lap-joint strength of metal-bonding adhesives at elevated temperatures

Creator:: Eickner, Herbert W., Olson, W. Z., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Composite Construction for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: of Wisconsin STATISTICAL VARIATIONS IN THE LAP-JOINT STRENGTH , 2OF METAL-BONDING ADHESIVES AT

Development and characterization of new formaldehyde-free soy flour-based adhesives for making interior plywood

Creator:: Huang, Jian
Abstract:: Formaldehyde-based adhesives such as urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives dominate the current wood adhesive market. However, these adhesives are derived from petrochemicals and carcinogenic formaldehyde. In this study, we developed two formaldehyde-free adhesives based on abundant, renewable, and inexpensive soy flour (SF). The first adhesive was mainly composed of...
Resource Type:: Masters Thesis
Full Text:: plywood: structural softwood plywood and decorative hardwood plywood. Softwood plywood is mainly used

Basic shear strength properties of metal-bonding adhesives as determined by lap-joint stress formulas of volkersen and goland and reissner

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report dated August 1955.
Resource Type:: Technical Report
Full Text:: University of WisconsinMADISON S. WISCONSIN BASIC SHEAR STRENGTH PROPERTIES OF METAL-BONDING ADHESIVES

Strength of aluminum lap joints at elevated temperatures (tests conducted immediately after the temperature was reached)

Creator:: Kuenzi, Edward W. and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published December 1949.
Resource Type:: Technical Report
Full Text:: Report No. 1804. Specimens and Methods of Testing Plates of clad 243-T3 aluminum alloy 5 by 8 inches

The shear, fatigue, bend, impact, and long-time-load strength properties of structural metal-to-metal adhesives in bonds to 24S-T3 aluminum alloy

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: Information reviewed and reaffirmed May 1959 and 1965. Report originally published June 1953.
Resource Type:: Technical Report
Full Text:: ...................... — 11 Conclusions • n co n ^ appamoe000■4uno,noo“O•Ipar an 18 Tables 1 Bonding conditions used in

Search Constraints

Search Results

Limit your search