Embedded passives in multi-layer media have gained importance for offering an attractive solution to the implementation of off-chip passive components in RF and mixed signal circuits, especially for wireless applications. Among the passive devices, power dividers and combiners are extensively used for a host of applications including balanced mixers, phase...
In advanced integrated circuit (IC) processes, the metal fill inserted to meet foundry imposed density requirements degrades the performance of interconnects and passive components which ultimately affects the overall circuit performance. Accounting for this degradation through electromagnetic and equivalent circuit modeling is becoming a critical aspect of IC design. However,...
Recent advances in high density low cost RF and microwave three dimensional
integration technologies using LTCC(Low Temperature Cofired Ceramics),
laminate and other multilayer hybrid and integrated circuits have increased interest
in the design of embedded passive components such as inductors, capacitors and
filters. The purpose of this study is to...
Power reduction can be achieved at many different levels, such as architecture, algorithm, logic, and transistor levels in circuit design. This thesis focuses on low power scheduling at the algorithm level. We present a latency-constrained scheduling and a latency and resource constrained scheduling, which minimize power consumption for the resources...
A new circuit technique called Folded Source Coupled Logic (FSCL) has been developed
to implement the digital section of mixed-signal IC applications. This FSCL circuit technique
offers the advantage of low overlap current spikes during the switching transitions
of conventional CMOS gates. This overlap current spike has become one of...
Scaling of CMOS technology has progressed relentlessly for the past several
decades. In order for this unprecedented scaling to benefit the performance of
large digital systems, the communication bandwidth between integrated circuits
(ICs) must scale accordingly. However, interconnect technology does not scale as
aggressively, making communication between chips the major...
This thesis will examine the model and design technique of a self-contained analog
CMOS Phase-Locked Loop. This system has an adaptable filter and demodulator for an
oscillating frequency of up to 1000 KHz and it is programmable by means of an external
resistor and capacitor. The first topic to be...
Minimizing the dynamic power consumption of a circuit is becoming a more and more important issue for digital circuit design in the age of portable electronics. Among all the arithmetic circuits, addition is the most fundamental operation. Therefore, designing low power adder is an important and necessary research area.
In...
A new comprehensive wide-band compact modeling methodology for single-ended spiral inductors and differential spiral inductors is presented. The new modeling methodology creates an equivalent circuit model consisting of frequency-independent circuit elements for use in circuit simulators. A fast automated extraction procedure is developed for determining the circuit element values from...
Present day data processing technology requires very high speed signal processing
and data conversion rates. Traditionally, these circuits have been implemented in silicon
MOS technology, whose high speed performance is limited, due to inherent material properties.
Though relatively immature compared to silicon technology, GaAs integrated circuit
technology appears to be...
In recent years, the rapidly growth of CMOS technology has evolved towards submicron and deep-submicron features. Due to smaller device sizes, and significant demand for low-power designs, the maximum allowable power supply voltage is restricted. So far, two solutions; clock boosting and switched opamp schemes have been proposed. The material...
Power optimization becomes more and more important due to the design cost and reliability. Sometimes high power consumption means expensive package cost and low reliability. The first step in optimizing power consumption is determining where power is consumed within a processor. While system-level code tracing and bit transition calculation are...
Variability in circuit performance due to process defects is a major concern in integrated circuit (IC) fabrication. Advanced IC manufacturing processes employ Chemical-Mechanical Polishing (CMP) for planarization of oxide and metal layers. CMP defects result in variations in the oxide and metal topographical profile. To reduce these topographical variations, electrically...
Real world is analog but the processing of signals can best be done in digital domain. So the need for Analog to Digital Converters(ADCs) is ever rising as more and more applications set in. With the advent of mobile technology, power in electronic equipment is being driven down to get...
To realize pipelined ADCs in deep-submicron processes, low voltage techniques
must be developed to work around problems created by limited supply voltages such as
the floating switch dead zone, reduced SNR, and reduced OpAmp performance.
This thesis analyzes standard and low voltage design issues for pipelined ADCs
and proposes a...
A digital phase locked loop (DPLL) and a statistical time-to-digital converter (STDC) were previously fabricated in a 0.35µm, 3.3V SOI CMOS process. This work summarizes these designs and characterizes the measured performance. Simulations supplement the measurements where applicable.
The DPLL was found to reach a locked state under a limited...
A novel method for modeling bends in coplanar waveguides (CPWs) is described. The CPW can be viewed as a pair of parallel coupled quasi-slot lines. Bends in the CPW are modeled as a non-uniform coupled line system in terms of their even- and odd- mode characteristics. This modeling approach is...
Spiral inductors are a key component of mixed-signal and analog integrated circuits (IC's). Such circuits are often fabricated using silicon-based technology, owing to the inherent low-cost and high volume production aspects. However, semiconducting substrate materials such as silicon can have adverse effects on spiral inductor performance due to the lossy...
An enhanced swing differential Colpitts VCO (ESDC-VCO) dramatically improves
the swing of a Colpitts VCO by allowing the signal to swing below ground and above the
supply voltage. Fabricated in a 1P8M 0.13 um CMOS process, the ESDC-VCO operates
at 4.9GHz with a 0.475-V supply and consumes 2.7mW. The measured...
Low-Density Parity-check (LDPC) codes have attracted considerable attention due to their capacity approaching performance over AWGN channel and highly parallelizable decoding schemes. They have been considered in a variety of industry standards for the next generation communication systems. In general, LDPC codes achieve outstanding performance with large codeword lengths (e.g.,...
With the advancement of technology, submicron CMOSonly process is available now for
Application Specific Integrated Circuits (ASICs). The high integration leads to the need for
high pin counts. However voltage supply and ground bounce due to many output drivers
switching at the same time is becoming a major problem. In...
With the growing demand for portable/consumer electronics, such as digital
audio/video (AV), the downscaling of device dimensions, which enables the
integration of an increasing number of transistors in a single chip, is mandatory.
This trend also continuously pushes the power supply voltage down to reduce the
power consumption and improve...
Present day data processing technology requires very high speed signal processing and data conversion rates. One such application which requires high speed is switched capacitor circuits used in Sigma-Delta modulators. A major active component of switched capacitor circuits is the monolithic operational amplifier(opamp). Because of the relatively poor speed performance...
With advancements in CMOS technology, high speed analog circuits that were
traditionally implemented with discrete circuit components can now be made monolithically.
Antialiasing filters for video signals as well as signal conditioning filters in high
speed communication channels are examples of applications where high frequency integrated
circuits are now feasible....
In recent years, there has been an extensive effort to develop low-cost implementations
of radio frequency integrated circuits for consumer applications. This thesis is a
research effort in the design and implementation of integrated RF CMOS Power Amplifiers
(PAs). A significant challenge in the implementation of RF CMOS ICs is...
In this thesis the network analog method is used to analyze various planar multi-conductor structures in multilayered, lossy dielectric media. The method is based on an efficient impedance network representation of the finite difference approximation of Laplace's equation for the electric potential. Using the network analog method, the transmission line...
A scalable macromodel for substrate noise coupling in lightly doped substrates with and without a buried layer has been developed. This model is based on Z-parameters and is scalable with contact size and separation. This model requires process dependent parameters that can be extracted easily from a small number of...
With increasing transistor operating frequencies, interconnects and passive devices are becoming performance limiters in integrated circuit (IC) designs. To combat this, the interconnect layers above the active silicon are trending toward low-κ dielectrics and Cu metallization. The use of these new materials has popularized chemical mechanical polishing (CMP) to planarize...
In Radio Frequency Integrated Circuits (RFIC) or high frequency digital
ICs, there is a demand to probe the internal nodes for testing. The ultra low
capacitance RFIC probe presented in his work is a flexible tool for these
applications. The probe utilizes the coupling between a tungsten needle and the...
The primary objective of this thesis is to develop a process for fabricating integrated circuits based on thin-film transistors (TFTs) using zinc tin oxide (ZTO) as the channel layer. ZTO, in contrast to indium- or gallium-based amorphous oxide semiconductors (AOS), is perceived to be a more commercially viable AOS choice...
There is a large and growing market for portable consumer audio products
with very small size. As the size of these products is reduced, the area occupied
by batteries becomes significant and hence limits the number of batteries to one.
In order to build such small products, high levels of...
Multiple-input multiple-output (MIMO) communication systems have recently been considered as one of the most significant technology breakthroughs for modern wireless communications, due to the higher spectral efficiency and improved link reliability. The sphere decoding algorithm (SDA) has been widely used for maximum likelihood (ML) detection in MIMO systems. It is...