Particleboard is a commodity composite panel made from the residual materials of other wood products manufacturing companies. The industry operates on low profit margins and thus produces high volumes of differing panel grades. Slight inefficiencies over the course of a year can mean a significant loss in profit. Previous calculations...
The surgical standard of care to partially restore grasping function after a traumatic spinal cord injury is a reconstructive tendon transfer-surgery that connects all four finger flexors to an expendable wrist extensor. While restorative, this surgery has a fundamental problem; the movement of all four fingers flexors is directly coupled,...
Hygro-mechanical effect is a general term applied to all phenomena that involves interaction between moisture content and mechanical characteristics of hygroscopic materials by analogy to thermo-mechanical effects. The hygromechanical effects include (but are not limited to) free shrinkage/swelling, effect of moisture on elastic modulus, strength, creep, failure mechanisms, and mechano...
In the search to improve and incorporate nano and renewable materials into urea-formaldehyde (UF), several researchers have incorporated cellulose nano fibrillated (CNF) into the adhesive. This study aimed to find an optimal way of incorporating CNF into UF and understand how CNF interacts with and changes the properties of the...
Deep rolling is a surface finishing technique that is widely used in several industries, specifically aerospace and automotive. Extending fatigue life by inducing compressive residual stresses at and below the deep rolled surface has been the primary driving force behind this newfound popularity. Understanding the development of the residual stresses...
Spot fires caused by lofted embers (i.e., firebrands) can be a significant factor in the spread of wildland fires. Embers can be especially dangerous near the wildland-urban interface (WUI) because of the potential for the fire to be spread near or on structures. Many studies have investigated the transport of...
Cultural differences between designers and users is an important aspect to consider when designing products for other countries. However, many prominent authors in the human factors engineering field have failed to specifically address how to identify and utilize cultural differences in user interface (UI) design. This research evaluated if design...
The advent of synthetic adhesives has transformed the structural applications of wood. However, a persistent issue in adhesively-bonded wood products has been moisture durability. When designing wood based composites, moisture durability will depend on both the wood phase and the adhesive phase. A key question, therefore, is how does one...
Identifying material characteristics of composites is important in designing any
structural system. The aerospace industry relies on these material properties not only to
design a functional aircraft, but also a safe and reliable one. Since carbon fiber
composites are relatively new materials, little is known about its characteristics under
certain...
As oriented strand board (OSB) increases in use as an engineered wood product, improving the in-plane shear properties will allow more efficient use of the material as well as open up other opportunities for OSB to be used in engineered wood products with high shear stresses. Based on classical laminated...
Meeting the energy demands of the future is one of the most important challenges facing the engineering community today. An example of this problem is transportation fuels. Most of the current transportation fuels are composed of petroleum hydrocarbons. Finding a viable alternative is important given the potential scarcity of these...
As drop-on-demand (DOD) applications continue to gain ground in desktop inkjet-printing, 3D printing, fluid mixing, and other areas the demand for higher frequency operations are beginning to push against the current physical boundaries in DOD technology. The current research is exploring the possibility of controlling drop volume and velocity at...
There is significant interest in utilizing microalgae as a source for biofuels. Diatoms are a class of single-celled microalgae which make silica cell walls and require dissolved silicon as a substrate for cell division. Manipulation of soluble silicon delivery to the culture offers a route to control cell cycle and...
Wood plastic composites (WPCs) are composite materials made from thermoplastic polymers, wood flour, and a small amount of process- and property-enhancing additives; they are principally used in the automotive industry and as secondary building materials. Although the WPC market is expected to keep growing, it is still relatively small when...
This work is a culmination of a series of published works related to the use of the Material Point Method (MPM) in modeling wood adhesive bonds. The use of wood as construction material has the potential to play a small role in the solution to the current CO2 and climate...
The increasing demand for forest products and restricted use of natural forests has resulted in a shortage of high-strength wood fiber. The area covered by plantation forests is steadily rising, but the fiber produced by these forests is often unsuitable for high-strength applications. One attempt to combat this problem is...
Engineers, in practice, are often faced with the challenge of evaluating a fire-damaged structure and developing a rehabilitation and retrofit plan. In order to decide on a rehabilitation and retrofit plan, information on thermal degradation of building materials and connections are vital. A critical knowledge gap exists in terms of...
The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
Innovativeness, or the propensity of a firm to create and/or adopt new products, process and business systems, has been measured using several methods in previous research. Examples of theses methods include current technology, self-evaluation, research and development funding, the number of new products, and intellectual property. In addition to the...
There are many uncertainties that complex engineered systems will face throughout their lifecycles due to changes in internal and external conditions. It is desirable for complex engineered systems to be resilient against various uncertainties. The ability to overcome such uncertainties should be embedded into the system from the beginning. However,...