Cross-laminated timber (CLT) is revolutionizing the use of wood in the construction sector of North America as a solution for walls and diaphragms in mid-rise or even high-rise timber structures on account of its environmental advantages, high strength-to-weight ratio, fire-safety performance, and propensity for prefabrication. However, considering the hygroscopic nature...
Fifteen large glued-laminated beams made from visually graded hem-fir lumber were designed, fabricated, and tested to failure in static bending. When tested, the beams had an average moisture content of 7.5 percent. The beams were 40 feet long, 5 1/8 inches wide and 24 inches deep. Before laminating, individual pieces...
Three groups of experiments were performed to determine an effective
procedure for controlling decay in southern pine (Pinus spp.)
laminated timbers. (i) A decaying laminated arch of southern pine was
treated with chloropicrin. Movement of the chemical vapor through the
arch and its effect on the decay and nondecay fungal...
As a result of its atomic structure, carbon fiber produced from mesophase pitch
has a high electrical conductivity and high tensile strength. Others have used carbon fiber
as a resistive heating unit to accelerate matrix solidification in carbon fiber-polymer
matrix composites.
In this study, a unidirectional carbon fiber reinforced polymer...
Recently, fiber-reinforced plastics (FRP lamina) have
been applied to glued-laminated (glulam) timber for the
purpose of improving bending strength and stiffness.
Initially, full length reinforcement using FRP lamina was
developed. However, the cost of FRP lamina is a significant
portion of the total cost of reinforced glulam. Therefore,
it is...
Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America.
CLT products must be certified for structural...
:
_____________________________________________________________________
Lech Muszynski
Cross-laminated timber (CLT) is a massive engineered wood product made of
The dynamics of radio frequency (RF) laminated veneer lumber (LVL) pressing are explored for the purpose of optimizing this process. The RF LVL press at the Albany Trus Joist plant is the focus of this investigation. The investigation first focuses on bond strength development characteristics of the Georgia Pacific adhesive...
Efficient use of wood in structural applications depends
upon the accuracy with which we can predict the mechanical
behavior of members under load. Most methods of lumber grading
and laminated beam design depend upon statistical and/or
empirical techniques in which averaged properties for complete
members are derived. A knowledge of...
The development of cross-laminated timber (CLT) panel technology has opened up new opportunities for wood in tall buildings. Several characteristics including seismic performance and speed of construction have raised interest among designers. As CLT gains acceptance in the industry, alternative structural solutions need to be investigated to improve performance of...
The reinforcement of wood and wood composite structural products to improve
their mechanical properties has been in practice for many years. Recently, the use of high-strength
fiber-reinforced plastic (FRP) as a reinforcement in such applications has been
commercialized.
The reinforcement is manufactured using a standard pultrusion process or
alternatively a...
Oriented strand board is a panel product used in
structural applications in home construction much like
plywood, yet little is known of the effect of temperature and
moisture content on its performance. The objective of this
study is to study these effects on oriented strand board and
for comparative purposes...
Mass timber is emerging as a viable form of construction around the world in new markets for wood buildings. The entrance into these markets has driven the demand for more knowledge to enable designs alongside other structural materials such as steel and reinforced concrete.
Large, in-plane tests on cross-laminated timber...
This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft design criteria under the supervision of the aeronautical board. Information reviewed and reaffirmed 1962. Original material published 1944.
Engineered wood composites are used in many structural applications and are intended for dry use. However, these materials may encounter significant amounts of wetting while in service, which can lead to structural failures. This study combined aspects of wood science, mechanics, structural engineering, and mycology to assess changes in material...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
The objective of this study is to complete life cycle inventories (LCI) for laminated veneer lumber (LVL) and composite I-joist (I-joist) production in the two main forest products producing regions in the U.S., the Pacific Northwest (PNW) and Southeast (SE). LVL and I-joists are composite wood building materials that are...
This report is one of a series issued in cooperation with the Army Air Forces and the Bureau of Aeronautics under the supervision of the Aeronautical Board.
