Electrospinning and electrospray are both nano-scale material fabrication techniques, based on related phenomena of electrically charged fluid spray from a droplet of liquid. Material is dissolved in liquid, then a spray is generated by applying a high voltage, creating an electric field, between the fluid dispensing capillary and a grounded...
A novel approach for the colorimetric detection of creatinine in a paper/polycaprolactone hybrid microfluidic device using alkaline3,5-dinitrobenzoate (DNB) is described. The reaction parameters of reagent concentration, alkalinity, and analysis time are optimized for fast reaction times and high color yield. Microfluidic devices incorporating this assay are designed and fabricated to...
The detection of biomolecules is critical for clinical diagnostics but requires specialty labor and high cost. The use of microfluidic paper-based analytical devices (µPADs) for bioassays is simpler and cheaper but has low sensitivity. Improved immobilization of antibodies onto cellulose is demonstrated through surface functionalization with APTES and glutaraldehyde. The...
The concept of reducing laboratory operations in scale such that they fit on a microfluidic chip has been met with great enthusiasm. Lab-on-a-chip devices promise to be cost effective to operate due to reduced reagent consumption, have the potential to offer shorter analysis times due to their short path lengths,...
Two improvements to the established procedures for synthesis and response detection of ion-selective optical sensors (optodes) were introduced.
The first improvement addresses the drawback of organic dye (optode-localized chromoionophore) photobleaching. This positively impacts fluorescence response and allows for (1) direct measurement of hydrogen ion activity upon binding with the dye,...
The concept of reducing laboratory operations into microfluidic devices has been an attractive area of research for several decades. Due to several advantages of porous-media microfluidic devices including low mass, portability, power-free fluid transport, and the ability to store dried reagents in the porous structures, these devices show great promise...
A simple Janus-type membrane-based wicking microfluidic device fabricated on a polycaprolactone-filled glass microfiber membrane enables separation and collection of blood plasma or serum from whole blood. This device bridges the wicking and cut-capillary-based solution transport mechanisms in a single membrane. The initial portion of the device is fabricated using selective...
Gene synthesis is an important tool in molecular biology. However, the current
bench-top method of gene synthesis is a costly, time-intensive and reagent-consuming
process. Lab-on-chip technology has many benefits over current bench top methods.
Microchips consume smaller reagent volumes, are reusable and less expensive to make.
This thesis explores the...
Analytical chemistry is an area of chemistry primarily focused on the study and use of instruments for separation, identification, and quantification of an analyte of interest. Specifically, separation science within analytical chemistry often refers to the process of dividing mixtures into their small component parts based on differences in their...
Miniaturized and portable microfluidic analytical platforms have been widely explored in the broad field of chemical analysis. The concept of microfluidics offer a number of important advantages, including low reagent consumption, low-cost detection, high sample throughput, and shorter analysis time. Semiconductor nanocrystals or quantum dots have been extensively utilized in...
The development of simple, rapid, and sensitive methods for thiophenol detection is of great importance in various fields, including environmental monitoring and food quality. Here, we present a novel approach for the colorimetric detection of thiophenols using gold nanoparticles (AuNPs) as the sensing platform. AuNPs aggregate in the presence of...
The development of micro total analysis systems (µTAS), also called “lab-on-a-chip”, or microfluidic analysis systems, is presented in this dissertation. Various research areas, covering subjects from magnetic particles synthesis to novel microchip fabrication techniques, are explored to develop a lab-on-a-chip system capable of performing magnetic bead-based bioassays. These devices are...
There has been a tremendous growth in interest in carbon nanodots (C-dots) in the past several years. As a nascent nanomaterial, C-dots have shown great promise in applications that benefit from their superior water dispersibility, low toxicity, non-blinking fluorescent output, chemical and biological compatibility, ease of functionalization and resistance to...
A system of Photoactuated Droplet Microfluidics (PDM), in which a droplet of
fluid is moved by way of the manipulation of the wettability of a spiropyran
functionalized surface via irradiation with ultraviolet and visible light, was proposed. The
photochromic behaviors of several species of spiropyran were studied and a procedure...
The emerging field of nanotechnology strictly requires the micro-scaling of the available separation technology and the design of novel devices for separations of molecules of interest. The separation of proteins and nanoparticles is challenging due to their relatively large size, non-specific adherence to surfaces and instability in many solvents.
This...
The challenges prompted by miniaturization of chromatographic systems have led scientists to explore new avenues in the synthesis of stationary phases. Packed capillary columns have found limited application in routine analysis due to a number of technical difficulties, most of which are attributable to the frits. New column designs insure...
Due to a number of disadvantages associated with the use of antibodies as
affinity stationary phases, researchers have recently began to explore the use of RNA
and DNA aptamers for use as affinity stationary phases. These molecules have been
shown to be a viable choice for applications in many methods...
Over the last decade, the miniaturization of analytical systems has become an increasingly important and interesting research area. Miniaturized systems offer many advantages, including reduced reagent and sample consumption, shorter analysis times, portability and disposability. This dissertation describes novel approaches in this direction, focusing on two areas: the miniaturization of...
High Performance Liquid Chromatography-Mass Spectrometry coupled with filtration, centrifugation, and other common sample preparation techniques offers a rapid and robust method for separating and quantifying propofol, a commonly used anesthetic, from human blood and its synthetic analogs. Method development is important for not only optimizing separation and quantification for a...
The development of microfluidic devices for heavy metal extraction is presented in this dissertation. Various research areas, covering subjects from photochromic compound syntheses to microchip fabrication techniques are explored to develop microfluidic devices capable of extracting heavy metal ions from drinking water. Through integration of the beneficial characteristics of both...
:
__________________________________________________________________
Vincent T. Remcho
The development of microfluidic devices for heavy metal extraction is
Analytical techniques are utilized in a wide variety of applications. Traditionally, analytical measurements are achieved by trained personnel in a laboratory setting using expensive scientific instruments, which limits their applicability in resource-limited areas and point-of-care applications. Therefore, the concept of enabling these laboratory-based qualitative and quantitative assays in microfluidic device...
For a number of reasons, miniaturization of chromatographic columns has been a general trend over the past three decades. Methods designed to enhance selectivity and efficiency can offer improved separation power and speed, expanding on the advantages of miniaturized columns. This dissertation describes novel approaches in this direction, focusing on...
The cross over from batch nanoparticle synthesis to continuous synthesis processes is crucial to the commercialization of these materials. This project reports comparative studies of batch and continuous synthese of copper nanoparticles by the polyol method. Continuous synthesis of copper nanoparticles was done utilizing a stainless steel micro-mixer that yielded...
:
_____________________________________________________________________
Vincent T. Remcho
The cross over from batch nanoparticle synthesis to continuous
A system to reversibly extract Pb²⁺ ions from aqueous solutions using spiropyran functionalized nanofibers was proposed. Spiropyrans are photochromic compounds which undergo a conformational change that alters their physical properties and makes Pb²⁺ binding possible upon irradiation with UV light (365 nm). Irradiation with green light (525 nm) reverses this...
The intriguing size- and shape dependent properties of nanoparticles have garnered recent attention in many science and engineering areas. When the particle size is in the nanometer size range, the material exhibits very different properties such as surface plasmon resonance (of gold nanoparticles) and superparamagnetism (of iron oxide nanoparticles). The...
Capillary electrophoresis as a technique has many applications in a broad range of fields including forensics, environmental analysis, and biological analysis and as a separation method for samples such as oligonucleotides, peptides, proteins, and pharmaceuticals. The research conducted herein is for the antibiotic pharmaceutical ciprofloxacin HCl and three impurities. Sample...
Continued interest in the development of miniaturized and portable analytical platforms necessitates the exploration of sensitive methods for the detection of trace analytes. Nanomaterials, on account of their unique physical and chemical properties, are not only able to overcome many limitations of traditional detection reagents but also enable the exploration...
Dielectrophoresis (DEP) is a separation method in which a non-uniform electric
field is used to induce a dipole moment in a suspended particle. If the polarization
of the particle is greater than that of the suspending medium, the particle will move
towards the region of higher field strength (positive DEP);...
Since their discovery in the 1990s, the great potential of carbon nanotubes (CNTs) has made them a focus of many research endeavors, including their application as components of biosensors. The inherent chemical "inertness" of CNTs makes their application to biosensing a challenge. It is necessary to "decorate" their surfaces to...
A microfluidic nanofiltration module has been designed, fabricated and applied to the continuous-flow, pressure-driven, post-synthetic purification of macromolecules and nanoparticles via diafiltration using a commercially available organic solvent resistant nanofiltration membrane, STARMEM 122. This module will readily interface with other microscale components within a
"nanofactory" for the rapid synthesis, purification...
Electrodeposition is a versatile polymer deposition technique to create nano-microscale materials using an electrical field generated from a charged droplet of solution and a grounded collector. Electrospinning or electrospraying can occur during electrodeposition, leading to the creation of nanofibers or bead-like materials depending on the process parameters. Photopolymerization of the...
The overall concept of reducing laboratory operations to a scale that fits on a single microfluidic chip has been an attractive area of research over the last several decades. Despite a surge in research, few commercial success stories have been written. Lab-on-a-chip technologies have the capability to be cost effective...
Over the last decade, the use of highly branched macromolecules, called dendrimers, is emerging. Polyamidoamine (PAMAM) dendrimers, in particular, have attracted high interest due to their unique properties, such as well-defined size, shape, and solubility in water. Our group, as part of an interdisciplinary team, is currently working on developing...
The “why” of any situation is one of the most important questions to ask. Inventors have ideas every day. Some ideas are the brilliant ideas that lead to a better tomorrow. To protect these ideas, inventors turn to patents, a governmental grant of the right to stop others, for a...
We have developed a compact micro total analysis system (μTAS) to serve as a platform for in-situ spectrophotometric water quality monitoring. Individual fluidic, optical, and electrical components were designed, developed, and characterized. These components were combined in both an integrated (single lithographic “chip-based” platform) and a modular manner. The microfluidic...
Experiments were conducted with two strains of the coccolithophorid Emiliania huxleyi. Previous experiments with CCMP1742 and 372 at a light intensity of 60 µEin/m²-s showed that during five-day periods of continuous darkness, strain 1742 was taking up nitrate from the media while strain 372 was not. The nitrate uptake in...
The objective of this study was to identify aroma volatiles in sweet whey powder. Volatiles were isolated by solvent extraction and solvent assisted flavor evaporation. Fractionation was followed to separate acidic volatiles from nonacidic volatiles. Gas chromatography/olfactometry and gas chromatography-mass spectrometry were used for the identification ofaroma compounds. Osme methodology...
This report details preliminary studies towards the development of a microfluidic
sensor that exploits ferromagnetic resonance, excited in magnetic bead labels, for signal
transduction. The device consists of a microwave circuit in which a slotline and a coplanar
waveguide are integrated with a biochemically activated sensor area. The magnetic beads...
Full Text:
.
Vincent T. Remcho received his BS in biochemistry in 1989 and his Ph.D. in chemistry
(with Prof. Harold
This report details preliminary studies towards the development of a microfluidic
sensor that exploits ferromagnetic resonance, excited in magnetic bead labels, for signal
transduction. The device consists of a microwave circuit in which a slotline and a coplanar
waveguide are integrated with a biochemically activated sensor area. The magnetic beads...
Full Text:
@eecs.oregonstate.edu,
Oregon State University
Remcho*, Vincent
Department of Chemistry, Vincent.Remcho
This report details preliminary studies towards the development of a microfluidic
sensor that exploits ferromagnetic resonance, excited in magnetic bead labels, for signal
transduction. The device consists of a microwave circuit in which a slotline and a coplanar
waveguide are integrated with a biochemically activated sensor area. The magnetic beads...
This report details preliminary studies towards the development of a microfluidic sensor that exploits ferromagnetic resonance, excited in magnetic bead labels, for signal transduction. The device consists of a microwave circuit in which a slotline and a coplanar waveguide are integrated with a biochemically activated sensor area. The magnetic beads...
In this paper we present a novel fabrication technique that utilizes polycaprolactone (PCL) as bonding media due to its low melting temperature property. PCL is biodegradable polyester with a melting point of 60°C, and a glass transition temperature of -60°C [1-10]. It is employed as a rapid bonding technique in...
New graphite intercalation compounds (GICs) containing N,N-n-alkyl substituted pyrrolidinium cation intercalates (Py[subscript n.m], n, m = alkyl chain lengths) are obtained via cationic exchange from stage-1 donor-type GIC [Na(ethylenediamine)₁.₀]C₁₅. Powder X-ray diffraction and thermogravimetric analyses are used to determine the GIC structures and compositions. [Py₄.₈]C₄₇·0.71DMSO and [Py₈.₈]C₄₈ with intercalate monolayers...
Chemical synthesis of oligonucleotides is a widely used tool in the field of biochemistry.
Several methods for gene synthesis have been introduced in the growing area of genomics.
In this paper, a novel method of constructing dsDNA is proposed. Short (28-mer) oligo fragments
from a library were assembled through successive...
Full Text:
and an
Oligo Library
Sumate Pengpumkiat1, Myra Koesdjojo1, Erik R. Rowley2, Todd C. Mockler3, Vincent
Chemical synthesis of oligonucleotides is a widely used tool in the field of biochemistry.
Several methods for gene synthesis have been introduced in the growing area of genomics.
In this paper, a novel method of constructing dsDNA is proposed. Short (28-mer) oligo fragments
from a library were assembled through successive...
Chemical synthesis of oligonucleotides is a widely used tool in the field of biochemistry. Several methods for gene synthesis have been introduced in the growing area of genomics. In this paper, a novel method of constructing dsDNA is proposed. Short (28-mer) oligo fragments from a library were assembled through successive...
The Micralyne microfluidic toolkit (μTK) was an instrument built by Micralyne in the early 2000’s. It was built for electrophoresis and has a sensitive laser-induced fluorescence detection system. The updates to the system were upgrading the control GUI from running in LabVIEW 5 (Windows XP, 2000) to LabVIEW 2012 (Windows...
Halogenated Polycyclic Aromatic Hydrocarbons (X-PAHs) are ubiquitous contaminants that are thought to be generated by processes such as chemical industries and incomplete combustion, including waste incineration and electronic waste (e-waste) burning. X-PAHs are a concern for environmental and human health because they are toxic, mutagenic, and are expected to be...
While fluorochemicals have been detected all over the world and in wastewater
treatment plants, the effect of wastewater effluent on the receiving waters has not been
evaluated. In the first study, the mass flow of fluorochemicals emanating from
wastewater treatment plants along the Glatt River in Switzerland was evaluated. The...
Radiation exposure to the brain can occur from a variety of events, including space missions, nuclear accidents, and clinical treatments. The effects of high dose radiation are well studied, but those of lower dosage are more elusive. Decline of memory and cognition is observed in patients exposed to low dose...
A novel method for detecting the peptidase activity of clinically relevant peptidases was investigated using solid-contact electrochemical polyion sensors under chronopotentiometric control. Complete instrumental control over ion-extraction was accomplished by incorporating a lipophilic electrolyte into the ion-selective membrane; the sensors had no intrinsic ion-exchange capabilities. The sensors were used to...
Fluorinated alkyl substances, which can be persistent, toxic, and
bioaccumulative, have been quantitated in many densely populated and
remote regions, including in air, surface waters, groundwater, and biota;
however, little is known about their transport or behavior in the environment.
Wastewater effluent is one of the principal routes for introducing...
It is often perceived that late maturity of grape gives a more complex aroma
profile to Pinot noir wine, however, there is little understanding of the basic flavor
chemistry of grape maturity on wine aroma. The aroma contributing compounds in
Pinot noir were first identified by aroma extract dilution analysis...
This dissertation describes the racemic and enantioselective synthesis cavicularin. Cavicularin is a macrocyclic bisbibenzyls family member natural product. It has been an attractive synthetic target due to its intriguing structure: the macrocyclic core imparts sufficient strain on the system to force one benzene rings to adopt a boat-shaped conformation, out...
A low, but significant, fraction of the carbohydrate portion of herbaceous biomass may be composed of fructose/fructosyl-containing components (“fructose equivalents”); such carbohydrates include sucrose, fructo-oligosaccharides, and fructans. Standard methods used for the quantification of structural-carbohydrate-derived neutral monosaccharide-equivalents in biomass are not particularly well suited for the quantification of fructose equivalents...
Recent advances in nanocrystalline materials production are expected to impact the development of next generation low-cost and/or high efficiency solar cells. For example, semiconductor nanocrystal inks are used to lower the fabrication cost of the absorber layers of the solar cells. In addition, some quantum confined nanocrystals display electron-hole pair...
Dental plaque is one of the well-characterized biofilms in the human body. Oral bacterial species play vital roles in maintaining healthy bacterial homeostasis as well as causing oral infections. Many of the oral diseases are caused by opportunistic pathogens, and therefore, the bacterial metabolic activities become important in dictating their...
Frozen Marion (Rubus sp. hyb) and Evergreen blackberries (Rubus laciniatus) (whole berries, berries without seeds, and seeds alone) were acetone/ chloroform extracted. Phenolics were isolated using C₁₈ cartridges and polyamide resins, then characterized and measured by reversed-phase HPLC/diode array spectral techniques. The Polyamide isolated fractions of Marion berries contained four...
ZnO nanowires (NWs) are good candidates for chemical sensing because of their high surface-to-volume ratio. In this work, ZnO nanobridge sensors were fabricated utilizing a novel method which uses carbonized photoresist (C-PR) as a nucleation layer. The use of C-PR allows simultaneous growth and integration of NWs to lithographically-defined features....
The focus of this study is to develop a general and low-cost solution-based
process to fabricate micro- and nano-structured semiconductors that are suitable
for electronics. This process uses simple metal halide precursors dissolved in a
solvent (organic or aqueous) and is capable of forming uniform and continuous
thin films via...
Transient liquid-phase diffusion brazing is used in precision, hermetic joining applications as a replacement for diffusion bonding to reduce cycle times, reduce bonding pressure and improve yields. Studies showed that the interlayer used in diffusion brazing can be detrimental due to the use of melting point depressants (MPDs). The goal...
Detection technique that proposed utilizing electrochemically controlled, reversible ion extraction into polymeric membrane in an alternating galvanostatic/ potentiostatic mode was introduced. This method is studied in detail to comprehend the advantages of the novel sensor (pulstrode) compared to the potentiometric ion selective electrode (ISE), studies included possible applications and limitations....
Transition metal oxides are an important class of materials for the wide variety optical, electrical, dielectric, magnetic, and thermal properties observed. Their unique structure-property relationships allow for property tuning and often provide insight into the fundamentals of chemistry. The work in this thesis was focused on the design, synthesis and...
The development and some applications of holographic optical tweezers (HOT) are presented. Our HOT system uses a spatial light modulator (SLM) to control the location and properties of the optical trap. We have developed a method for optimizing the diffraction efficiency of a SLM that can be applied in situ...
Wine taste and mouthfeel are essential factors that determine consumer acceptance, consumer preference, and wine quality. The three taste descriptors, sweet, sour, and bitter, are well understood and routinely appearing in wine sensory. In contrast, information related to mouthfeel sensations is still relatively limited. Winemakers have worked hard to craft...
When hops are added to beer, varying degrees of hoppy aroma persist in the finished beer as a result of a number of factors. Dry-hopping is a technique whereby hops are added to beer post-fermentation to leverage the maximum aroma potential of the hop essential oils while minimizing bitterness contribution...
The general theme of this dissertation is the development of new analytical sensors to quantitatively study biological and environmental samples in aqueous and non-aqueous environments. A platinum ultramicroelectrode (UME) and a unique carbon-based pH microprobe were used to design a new SECM-based electrochemical bioassay. The Pt UME was used to...
Prevention of marine biofouling is vital to the survivability and performance of ships, buoys, and wave energy devices. Coatings that contain metal biocides are currently used to prevent marine biofouling. These coatings have a limited lifetime and are under environmental scrutiny. As a result, it is necessary to research and...
Interest in nanomaterials is motivated partly by their potential for sensor arrays to detect
different gases. Nanowires in particular are of interest because their high surface-to-volume
ratio promises the possibility of high sensitivity. However, because of their discrete
quasi-one-dimensional geometry, electrical integration of nanowires into photolithographically
defined devices and circuits...
The overall objective of this dissertation study was to develop and validate the performance of cellulose nanomaterials (CNs) incorporated fruit coatings for improving the storability of postharvest pears and bananas under various storage conditions. Four specific studies were conducted to fulfill the research objectives as stated below.
First, cellulose nanocrystal...
Microalgae has been under careful consideration as a sustainable feedstock for renewable fuel recently due to its year round production with high energy yields per unit area, reduced need for arable land, water treatment benefits with nutrient cycling, and minimal competition with the food industry. Despite of all these advantages,...
Ethanol production from lignocellulosic feedstock has been under intense scrutiny as a transportation fuel due to its potential to address concerns of increasing energy consumption, limited fossil energy resources, climate changes due to greenhouse gas emissions from fossil fuels, and especially use of non-food biomaterials, which address the biggest limitation...
Beer is one of the most extensively consumed beverages world-wide and it is almost always brewed with hops (Humulus lupulus, L.). Hops provide beer with bitterness, aroma, flavor and texture and also enhance specific beer properties such as foam stability, clarity (colloidal stability), color, flavor stability and microbial stability. Hops...
Thermal stabilization of chlorophyll and anthocyanin on pear peels during thermal process was investigated in this study. The green color of peels-on thermally processed (canned) pears was successfully retained by complexation of magnesium-free chlorophyll with zinc ions, and the red pigments were stabilized through anthocyanin-stannous complexation and polymerization of pear...
State-of-the-art, high-resolution mass spectrometry techniques for acquisition of metabolomic and lipidomic data coupled with advanced computational methods provide new opportunities for interpreting large and complex datasets and comprehending the underlying biological processes of diseases. Both metabolomics and lipidomics strive to obtain comprehensive analyses of small molecules, i.e., metabolites and lipids,...
New methods, sensors, and devices based on redox indicators were developed to
monitor redox conditions in anoxic and anaerobic laboratory systems and the subsurface
environment. The primary application was monitoring redox conditions
during the dechlorination of tetrachioroethene (PCE) to ethene (ETH) in packed
columns and microcosm bottles containing an enriched...
Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous contaminants and are mostly products of the incomplete combustion of organic material. PAHs are often found in environmental samples as a complex mixture of isomers. In addition, the same sources that produce complex PAH mixtures also produce other poorly characterized mixtures of organic compounds,...
Science inquiry is central to the science education reform efforts that began in the early 1990's. It is both a topic of instruction and a process to be experienced. Student engagement in the process of scientific inquiry was the focus of this study. The process of scientific inquiry can be...
The purpose of this research was to compare four different media that were used to monitor SOC atmospheric concentrations in remote ecosystems. The accumulation of semi-volatile organic compounds, including pesticides, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), was investigated in lichen, 2-year old conifer needles, resin-based passive air sampling...
Three analytical methods for determination of aroma compounds in alcoholic beverages were developed and validated. These methods are sensitive and reliable that can be applied to analyze volatile phenols, stale aldehydes as well as some highly volatile aromas in alcoholic beverages. In the first study, an ethylene glycol (EG) polydimethylsiloxane...
Cryopreservation of adherent cells may be advantageous for cell types that are difficult to
preserve in suspension or when it is necessary to preserve characteristics of the adherent cultured cells. Vitrification is a promising procedure for the preservation of adherent cells that prevents ice crystal formation and the resulting dissociation...
This thesis presents an approach to develop innovative methods for decontamination and surface protection applicable to naval nuclear ships and potentially, personnel, replacing antiquated techniques. To accomplish this goal, two products manufactured by CBI Polymers, LLC., DeconGel™ 1101 (1101) and a shampoo, DeconGel™ "prototype" (prototype), were tested.
The prototype was...
American hop growers have historically dried hops in the range of 140-155°F/ 60-68°C using deep bed kilns (24 – 32 inches/ 60 – 81 cm), but over the last 10 years they have shifted to lower temperatures (125 -135 °F/ 52 – 57°C) for drying new American aroma cultivars. Reduced...
There is significant interest in harnessing the biosynthetic capacities of photosynthetic diatom microalgae for the production of unique bioinspired nanomaterials. Specifically, this research focuses on understanding the photoluminescent properties of diatom biosilica and β-chitin nanofiber production in diatoms. Diatoms are single-celled microalgae that possess intricately patterned biosilica shells called, frustules....
The general theme of this dissertation is the application of novel carbon based micro sensors with the scanning electrochemical microscopy (SECM). SECM allows positioning of the probe without touching the substrate while mapping the chemical parameters in 3D space above the substrate. The main focus of the dissertation is the...
Methane is a flammable gas that is the main component of natural gas. It is a highly potent greenhouse gas, and accounts for about 20% of greenhouse gas emissions. Methane is routinely flared in many industrial processes without harnessing any of its energy. The environmental impact and wasted energy potential...
The development of nanomaterials and the potential enhancement of their chemical, mechanical, electrical, and optical properties have led to the investigation of methods for their synthesis at lower cost with enhanced performance for next generation devices. Along with the pursuit of new materials that exhibit properties of interest, industry requires...
WLBU2 is an engineered cationic amphiphilic peptide that targets Gram-positive and Gram-negative bacteria, and envelopes endotoxin while avoiding other cell types. The exact mechanism of how WLBU2 targets, binds, and disrupts bacterial cell membranes is still not completely known. Thus, the overall goal of this investigation is to determine the...
Advances in energy technologies and electronics have typically occurred through either heightened performance or cost reduction. This dissertation explores both routes through a series of fundamental material studies that may contribute to the enabling of next generation devices. Solution based syntheses and deposition of chemical products offer a low cost...
Carboxylic acids have played an important role in the field of actinide (An) and lanthanide (Ln) separations and the reprocessing of irradiated nuclear fuel. Recent bench-scale experiments have demonstrated that 3-carboxy-3-hydroxypentanedioic acid (citric acid) is a promising aqueous complexant that can effectively aid in the separation of transition metals from...
The development of a transient electric birefringence (TEB) apparatus for macroparticle characterization is herein discussed. The experimental difficulties encountered were related largely to poor data resolution. Misalignment and strain birefringence in optical components further complicated results. Improved data digitization methods were developed, and precise mathematical models were derived in order...
In a search for designed materials that mimic those found in biological systems, combining polymers with inorganic materials in sol-gel chemistry processes has gained momentum in the research world since the 1990's. This work methodically investigated the properties of several related polymer-SiO₂ hybrids prepared by a simple methodology that could...
The objective of this thesis is to introduce and demonstrate a novel magnetic bead detector based on inductive detection at the ferromagnetic resonance (FMR) frequency for use in bio-sensing applications. Detection ability is demonstrated through theoretical arguments, numerical computer simulations, and experimental characterization of micro-fabricated detectors.
The detector is composed...
The purpose of this research was to investigate the optoelectronic properties of the
Ge doped biosilica, mainly focused on the photoluminescence (PL) properties of
diatom frustules of N. frustulum that contain metabolically inserted germanium
oxide produced by a two-stage photobioreactor cultivation process. In order to
explain the observed PL intensity...
Contact of blood with the surfaces of synthetic materials is associated with spontaneous protein adsorption, initiating platelet aggregation, the coagulation cascade, and the eventual development of a stable clot. Current therapy to inhibit implant-induced thrombosis is life-long administration of systemic anticoagulants. An alternative to the systemic administration of anticoagulant drugs...
Background: The Oregon Wrestling Weight Monitoring Program establishes the athlete’s minimum wrestling weight (MW) for the season. This program specifies the
wrestler’s maximum weight loss rate and was implemented in order to reduce
unhealthy weight-cutting behaviors commonly practiced by wrestlers. Aims: (1) To
compare differences in percent body fat (%BF)...
The fusion reaction ²⁰⁸Pb (⁵⁰Ti, xn) ²⁵⁸⁻x Rf (x = 1-3) was studied to determine PCN (probability that the mononucleus system evolves to form a compound nucleus inside the fission saddle point) and to establish the value of Wsur (survival probability) for the given reaction experimentally. The fission excitation function...
Novel synthetic strategies are developed to prepare new intercalation compounds and nanocomposites with several layered hosts (NiPS₃, Na-montmorillonite, MoS₂ and MoO₃). In these products, alkali metals are ionic intercalates and linear polymers, dendrimers or amines act as co-intercalates. In addition to new synthetic approaches, new structures are identified and characterized....
Ion-selective polymeric optical sensors – ion optodes – are a promising alternative to ion-selective electrodes and fluorescent dyes for analytical and biological applications, e.g. extra- and intracellular measurements. They are non-toxic, highly selective robust probes for ionic fluxes monitoring.
A large-scale fabrication of ion optodes using a solvent displacement method...
The materials Fe₂(Si,Ge)(S,Se)₄, Cu₃PS[subscript 4-x]Se[subscript x] (0 ≤ x ≤ 4), and Cu₃PxAs[subscript 1-x]S₄ (0 ≤ x ≤ 1) have been synthesized and studied as new earth-abundant absorbers for single and multijunction photovoltaic cells as well as solar fuel generation. The synthesis, single-crystal growth, and optical and electrical properties of...
