The structural and stress changes in molybdenum/amorphous silicon (Mo/a-Si)
EUV reflecting multilayers during annealing at 316°C were studied. The amorphous
interlayers, with an Mo:Si stoichiometry of 1:2, grew during annealing. The residual
stresses in each component of the multilayer also changed significantly. Through high
resolution electron microscopy, selected area electron...
All carbon steel that is used in tools, springs,
and machine parts where tempering is necessary undergoes
three distinct heat treatments: first, heating for forging;
second, heating for hardening; and third, heating
for tempering.
The current knowledge on the microstructural evolutions and mechanical properties of selective laser melting (SLM) produced H13 tool steel components is limited. This research is focused on optimization of SLM processing parameters for H13 tool steel and investigation of microstructure and mechanical properties of H13 tool steel components after SLM...
The temperature-time-location relationships during steam conditioning and pressure
treatment of timber poles have been studied and mathematical models that take into
account both the thermal properties of the poles and the parameters of the treatment
process have been developed. Although much work has been previously done in this
area, the...
Ultra high temperature (UHT) processing can extend shelf life of milk to several months without refrigeration, which is more convenient and energy saving than pasteurized milk. However, the poor acceptance caused by "cooked" flavors limits its marketing growth, especially in United States. Ohmic heating, which has a more uniform and...
CPM-M4 tool steel is a commonly used knife blade material due to its high strength and wear resistance. The goal of this thesis is to understand how heat treatment parameters affect blade performance and microstructure.Five heat treatments were applied to CPM-M4 steel by varying austenitizing and tempering temperatures. The microstructures...
This study determined the independent effects of various homogenization cycles and
precipitation treatments on the elevated temperature workability and the final ambient
temperature mechanical properties of AA2024 aluminum alloy and on the T3 tensile
properties of 2014 aluminum alloy as well as T6 tensile properties of 2618 and 2618 (Curich)...
As the forest industry moves toward the use of younger trees and production of an increasing number of composite products improving durability has gained importance. Coatings are one of the most widely used methods for improving wood durability because they improve resistance to water penetration, and subsequent shrinking and swelling,...
The need for clean and renewable fuel such as hydrogen is driven by a growing worldwide population and increasing air pollution from fossil fuels. One of the major barriers for the use of hydrogen in automotive industry is the storage of hydrogen. Physisorption is the most promising storage technique due...
Variations in heat treatments have significant effects on the microstructure of tool steels. For CPM-M4 tool steel, the changes in microstructure and mechanical properties were observed based off of variations in temperature. Five heat treatments with constant exposure time and variable austenitizing and tempering temperatures were performed on samples of...
Analytical chemistry is an essential qualitative and quantitative tool to describe foods and biomaterials and their changes during production, processing and distribution. In this work, rapid analytical procedures for the extraction and quantification of components in fluid milk and diatom fermentation broth were developed. Analytical methods to measure the concentration...
