No one prefers green lumber. Its higher shipping weight, poorer nail-holding power, and shrinkage after fabrication are well known, but the present pressure for deliveries results in much of it being accepted. Another major objection to lumber shipped green is that is may be damaged bu wood-decaying fungi, either in...
The fixed bed drying of western hemlock and Douglas-fir biomass particles at temperatures ranging from 50°C to 200°C and air velocities from 0.3 to 0.9 m/s was investigated. The objectives were to describe the drying characteristics of the particles, fit a model for thin-layer drying, and develop and test a...
Rotary dryers are the most commonly used wood drying system in the particleboard industry. These dryers also play an increasingly important role in drying wood residues for fuel. Many potential benefits may be realized through an improved understanding of the rotary drying process. A rotary dryer simulation model was developed,...
The rat caused by Pozia incrassata (Berk, and Curt.) Burt (sometimes erroneously called "dry rot") in individual cases is the most destructive of the building decays in the warm coastal portions of the United States and the South. The fungus usually attacks rapidly and may cause damage necessitating extensive repairs...
Tanoak lumber might supplement the supply of white oak for boat construction, as the tree has extremely thick sapwood that can be pressure- treated readily with preservatives.
One-inch tanoak lumber was kiln -dried to 3 different moisture content ranges, then pressure -treated with water -borne preservatives. Some unseasoned lumber was...
A mathematical and then a numerical model were developed for simulating a convective batch lumber drying process. The model incorporates mass and heat transfer relationships within the lumber stack, as well as thermodynamic properties of the wood and drying air. It takes into account a change of air properties along...