This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board. Information reviewed and reaffirmed March 1956. Original publication dated May 1948.
This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Oils, greases, and grit which collect on an aircraft during
flight are removed on the U. S. Air Force washracks using an
alkaline, water-base cleaner. Waste-flows from these washracks
may include in addition to free oils, emulsified oils, and alkaline,
water-base cleaners several other constituents such as acid skin
brightners,...
An analytical method for predicting life-cycle maintainability labor costs is developed. The purpose of the analytical method is to allow the evaluation of products, based on life-cycle labor cost, early in the design process. The Boeing 737-300/400/500 Bleed Air Control System is used as a test model, and the results...
Published September 1988. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
Revised September 1993. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
Published January 1973. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
Published March 1965. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
The objective of this project was to evaluate methods to remediate a wood I-joist with a single, circular hole in the web while leaving utilities in place. The methods were experimentally evaluated with a full-scale bending test using four equally spaced point loads. There were three depths of joists with...
This thesis is a study of certain costs relevant to the repair of
process line equipment. A specific production configuration is studied
through computer simulation and statistics. The significance of the
simulated costs are investigated and related to practical production
problems.
Costs relevant to the "permanent repair" of production equipment...
Published October 1943. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
Fishing nets have been used for thousands of years by those who seek food from the sea or make their living by catching fish.
In the early days suitable knots had to be devised before a net could be made. Its size was determined by the availability of suitable materials...
Revised April 1967. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog
In a properly operating septic system, the solid material in the sewage is settled out in a septic tank and stored until removal by pumping. The effluent from the tank is still sewage. It has a strong odor and is high in disease causing organisms. This effluent is treated and...
Published August 1968. Facts and recommendations in this publication may no longer be valid. Please look for up-to-date information in the OSU Extension Catalog: http://extension.oregonstate.edu/catalog