Index Catalog // ScholarsArchive@OSU

Suitability of little-used species for containers

Creator:: Carlson, T. A. and Forest Products Laboratory (U.S.)
Abstract:: Published in The Timberman, March 1929. Information reviewed and reaffirmed, 1963. Original report dated March 1929.
Resource Type:: Technical Report
Full Text:: which were used for the tests as a whole. The test-was made in a drum testing machine of 7 feet

Basic design data for the use of fiberboard in shipping containers : Box strength calculator

Creator:: Forest Products Laboratory (U.S.), Kellicutt, Keith Q., Landt, Eugene F., and Setterholm, Vance C.
Abstract:: Information reviewed and reaffirmed October 1958.
Resource Type:: Technical Report
Full Text:: container-evaluation studies that have been made and the experience of industry. To extend further the use

Basic design data for the use of fiberboard in shipping containers

Creator:: Forest Products Laboratory (U.S.), Kellicutt, Keith Q., and Landt, Eugene F.
Abstract:: Information reviewed and reaffirmed, September 1958. Original report published November 1951.
Resource Type:: Technical Report
Full Text:: been made in evaluating. container strength and some work has been done in technical design, much more

Some theoretical and experimental aspects of design with brittle material

Creator:: Robinson, Ernest Y.
Abstract:: The Weibull theory, an attempt to account for the variability of measured strength in brittle materials, is described in some detail. An important and useful modification is derived, the normalized survival probability distribution, given by the equation [equation] where S is the probability that the specimen will survive the fraction...
Resource Type:: Masters Thesis

Residual strength properties of Gr/BMI composite laminates after constant/cyclic compression

Creator:: Shenoy, Krishnananda
Resource Type:: Masters Thesis
Full Text:: Strength Parameters 8 2.2 General Purpose Laminate Program - Gen lam 12 3. Component Material Properties

A study of compression loading of composite laminates

Creator:: Berbinau, Pierre J.
Abstract:: The compressive behavior of continuous fiber composites is not as well understood as their tensile behavior because research and industrial applications have until recently focused on the latter. Furthermore, most theoretical and experimental studies on the compression of composites have examined the case of unidirectional specimens with fibers along the...
Resource Type:: Dissertation
Full Text:: experimental results obtained from compression testing of graphite/thermoplastic laminates with the same ply

Development of a procedure for the determination of the properties of cushioning materials and their application in the design of cushions

Creator:: Forest Products Laboratory (U.S.), Lassen, Leon E., Kellicutt, Keith Q., and Sanderson, W. J.
Resource Type:: Technical Report
Full Text:: cushioning was removed from the container, examined, and weighed to determine the loss of material. The

Potentialities of paper-base laminates as compared with other laminates

Creator:: Stamm, Alfred J. (Alfred Joaquim), 1897- and Forest Products Laboratory (U.S.)
Resource Type:: Technical Report
Full Text:: pound of laminate . It is of interest that paper is considerably cheaper than most of the base material

Investigation into the role of strength and toughness in composite materials with an angled incident crack

Creator:: Grimm, Brian A.
Abstract:: Understanding the mechanical behavior of composite materials requires extensive knowledge of fracture behavior as a crack approaches an interface between the bulk material and the reinforcement structure. Overall material toughness can be greatly influenced by the propensity of an impinging crack to propagate directly through the substrate or deflect along...
Resource Type:: Masters Thesis
Full Text:: knowledge of fracture behavior as a crack approaches an interface between the bulk material and the

The design of a variable strain rate, autographic recording, tensile testing machine

Creator:: Hull, Gordon Laurance
Resource Type:: Masters Thesis

The FPL dynamic compression testing equipment for testing package cushioning materials

Creator:: Forest Products Laboratory (U.S.) and Stern, Robert K.
Resource Type:: Technical Report
Full Text:: , B. the cushioning material, and Q. the outer container. In order to an- alyze the action of this

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces (Part A - Additional tests on anodized aluminum and on zinc-chromate-primed magnesium)

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: the metal pieces. Testing The 3 lap-joint panels prepared with each metal, surface treatment, and

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Revised April 1954. Addendum added. Supplement available with revisions. No. 1842A
Resource Type:: Technical Report
Full Text:: of 50 pounds per square inch. Testing Three of the lap-joint panels prepared with each bonding

Short-column compressive strength of sandwich constructions as affected by the size of the cells of honeycomb-core materials

Creator:: Norris, Charles, B. (Charles Brazer), 1894-, Kommers, William J., and Forest Products Laboratory (U.S.)
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: - mined for all facing stresses up to 60,000 pounds per square inch. This method of testing sheet material

Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : tests conducted after exposure to elevated temperatures for 192 hours

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958.
Resource Type:: Technical Report
Full Text:: , "Fabrication of Lightweight Panels of the Aircraft Type." Testing Apparatus and Procedures Except for an

Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : glass-cloth facings, balsa core -- tested immediately after the test temperature was reached

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed 1958. Original report issued April 1952.
Resource Type:: Technical Report
Full Text:: of the aircraft type. Details as to testing apparatus and procedures were identical with those

Effect of elevated temperatures of the strengths of small specimens of sandwich construction of the aircraft type

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Information reviewed and reaffirmed May 1954 and 1962. This report was originally published in August 1949.
Resource Type:: Technical Report
Full Text:: were conducted immediately after the speci- mens reached the desired temperature. Apparatus and testing

Development of a counterpart vertical fin of papreg for the AT-6 airplane

Creator:: Forest Products Laboratory (U.S.) and Jungmann, E. C.
Abstract:: This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on Aircraft Design Criteria under the supervision of the Aeronautical Board.
Resource Type:: Technical Report
Full Text:: to the decision to investigate the utility of this material in a primary structural assembly in

Strength and related properties of Forest Products Laboratory laminated paper plastic (papreg) at normal temperature

Creator:: Erickson, E. C. O., Boller, Kenneth H., and Forest Products Laboratory (U.S.)
Abstract:: Information reviewed and reaffirmed, June 1959.
Resource Type:: Technical Report
Full Text:: resin, were obtained com- mercially. Although the material tested was produced under laboratory

Shrinkage and strength of steam cured Haydite masonry unit concrete mixes

Creator:: Peyton, Harold Ray
Resource Type:: Masters Thesis
Full Text:: MASONRY UNIT CONCRETE MIXES INTRODUCTION HAYDITE: Haydite i a cellular, light-weight material produced

ScholarsArchive@OSU

Suitability of little-used species for containers

Basic design data for the use of fiberboard in shipping containers : Box strength calculator

Basic design data for the use of fiberboard in shipping containers

Some theoretical and experimental aspects of design with brittle material

Residual strength properties of Gr/BMI composite laminates after constant/cyclic compression

A study of compression loading of composite laminates

Development of a procedure for the determination of the properties of cushioning materials and their application in the design of cushions

Potentialities of paper-base laminates as compared with other laminates

Investigation into the role of strength and toughness in composite materials with an angled incident crack

The design of a variable strain rate, autographic recording, tensile testing machine

The FPL dynamic compression testing equipment for testing package cushioning materials

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces (Part A - Additional tests on anodized aluminum and on zinc-chromate-primed magnesium)

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces

Short-column compressive strength of sandwich constructions as affected by the size of the cells of honeycomb-core materials

Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : tests conducted after exposure to elevated temperatures for 192 hours

Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : glass-cloth facings, balsa core -- tested immediately after the test temperature was reached

Effect of elevated temperatures of the strengths of small specimens of sandwich construction of the aircraft type

Development of a counterpart vertical fin of papreg for the AT-6 airplane

Strength and related properties of Forest Products Laboratory laminated paper plastic (papreg) at normal temperature

Shrinkage and strength of steam cured Haydite masonry unit concrete mixes

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search