Although the importance of the face in communication is well-known, there has been little discussion of the ramifications for those who lack facial expression: individuals with facial paralysis such as Bell’s palsy and Möbius syndrome, and facial movement disorders like Parkinson’s disease. By examining the challenges experienced by these individuals,...
The load transfer between wood particles and
the matrix was analyzed by observation of the strain patterns
in thin films of high density polyethylene (HDPE)
with embedded wood particles subjected to tensile loading.
Optical measurement techniques based on the digital
image correlation (DIC) principle were employed for quantitative
measurement of...
To quantify the postpeak residual capacity and
to gain insights into the load transfer mechanism of a shear
wall, nail connection tests were performed on salvaged
connections after a monotonic shear wall test loaded up
to peak load. Experimental results reveal that there is a
loss of strength in most...
In many disease settings, it is likely that only a subset of the disease population will exhibit
certain genetic or phenotypic differences from the healthy population. Therefore, when seeking to identify
genes or other explanatory factors that might be related to the disease state, we might expect a mixture
distribution...
Adsorbed molecules are involved in many reactions on solid surfaces that are of great technological
importance. As such, there has been tremendous effort worldwide to learn how to theoretically
predict rates for reactions involving adsorbed molecules. Theoretical calculations of rate constants
require knowing both their activation energy and prefactor. Recent...
Although literacy programs in North African countries vary in method, management approach, and in content emphasis, their discourse is strikingly similar: It focuses too often on learners' deficits and considers the condition of these “illiterate” subjects, i.e. persons lacking the 3Rs, as a “disease” against which a war of eradication...
Wood and wood-based composites are being used extensively in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. In fire-resistant design for wood structures, the main goal is to ensure that enough structural integrity is maintained, during...
Finite element analysis was used to study the effective transverse modulus of solid wood for all possible end-grain patterns. The calculations accounted for cylindrical anisotropy of wood within rectangular specimens and explicitly modeled wood as a composite of earlywood and latewood. The effective modulus was significantly reduced by growth ring...
Current compression perpendicular-to-grain (C-perpendicular to) design values for wood members are based on mean stress obtained from ASTM D143 specimen. The standard ASTM test with metal on wood bearing has limited applicability in modern construction assemblies with C-perpendicular to loading scenarios. Previous work has shown that end-bearing conditions and wood-on-wood...
The goal was to determine local mechanical properties inside of oriented strand board (OSB) based on a realistic morphology-based finite element (FE) model and data acquired from a physical test performed on the same material. The spatial information and local grayscale intensity from CT-scans obtained from small OSB sample was...
The effect of grain angle (GA) on shear strength of Douglas-fir has been evaluated. Shear block specimens with a GA varying from 0 to 90° was loaded in the shear plane, resulting in failure mode transitioning from parallel to grain shear to rolling shear. As expected, shear strength decreased as...
The most active phenolics in Quercus sideroxyla Humb. & Bonpl. residual bark were identified and evaluated following a chromatographic fractionation. Bark powder was defatted with hexane and crude extract (CE) was obtained by extraction with aqueous acetone (70%). A liquid partition with ethyl acetate was performed to produce an organic...
In this study, triglycidylamine (TGA) was synthesized and evaluated as a crosslinking agent for soy flour (SF) for making five-ply plywood from yellow poplar. Glycerol polyglycidyl ether (GPE) and trimethylolpropane triglycidyl ether (TTE) were also investigated as crosslinking agents for SF as adhesive for plywood. The plywood panels bonded with...
For wood beams, it is often assumed that the neutral axis (NA) is located at the centroid of the beam. This would be the case for isotropic and homogeneous materials but these prerequisites are not valid for wood. The varying grain patterns and knots located throughout wood make wood anisotropic...