Primary wood products manufacturers generate significant amounts of woody biomass residues that can be used as feedstocks for distributed-scale thermochemical conversion systems that produce valuable bioenergy and bioproducts. However, private investment in these technologies is driven primarily by financial performance, which is often unknown for new technologies with limited industrial...
The potential for using pretreatment with cinnamon leaf oil or juniper foliage oil to improve the durability of viscoelastic thermal compression (VTC)–treated hybrid poplar was explored in a field termite test and a laboratory mold test. The addition of oils prior to VTC processing had variable effects on resistance to...
Routine inspection of wood utility poles to detect internal decay involves drilling holes at or about the ground line. While these holes are useful for detecting internal decay, their presence raises concern among engineers about their potential effects on pole flexural properties. The effect of inspection holes on flexural properties...
The objective of this study was to test a method under development for assigning allowable properties to foreign species graded by American Lumber Standard machine-stress-rated (MSR) rules. The method was tested on dahurian larch (Larix dahurica), a major softwood species that grows in the Russian Far East and could be...
Red oak, Douglas-fir, and ponderosa pine lumber was treated with a silicon/paraffinic system to assess the ability of the treatment to limit dimensional changes and moisture uptake during changes in temperature or relative humidity. The treatment initially had little effect on either property, but the magnitude of weight gain and...
In this article, we present cradle-to-gate life-cycle inventory (LCI) data for wood fuel pellets manufactured in the Southeast United States. We surveyed commercial pellet manufacturers in 2010, collecting annual production data for 2009. Weighted-average inputs to, and emissions from, the pelletization process were determined. The pellet making unit process was...
The effect of metal end plates on reducing checking of pentachlorophenol-treated Douglas-fir crossarms was evaluated over 13 wet–dry cycles. Check development was variable over the first three to four cycles, and then steadily increased for both plated and nonplated ends of arms; however, both the number of checks and the...
Preservative treatments are required whenever glued laminated beams are exposed outdoors. Treatments can be either water-based systems applied to individual laminations prior to layup or organic solvent–borne systems applied after the beams are fabricated. Water-based systems are not recommended for posttreatment because of concerns over checking and the potential for...
The resistance of three naturally durable heartwood species and a stranded giant bamboo product to fungal and termite (Coptotermes formosanus) attack was evaluated at a test site located near Hilo, Hawaii. Merbau (Intsia bijuga or I. palembanica) and ipe (Tabebuia spp.) were both exceptionally resistant to fungal and termite attack,...
The potential of 17 hydroxylamine derivatives as wood preservatives was assessed on ponderosa pine sapwood blocks exposed to one of two decay fungi: Gloeophyllum trabeum or Trametes versicolor. Weight losses on untreated controls were generally lower with the white-rot fungus (T. versicolor) averaging 30.4 percent, while those for the brown-rot...
The effect of copper naphthenate treatment on electrical resistance of Douglas-fir utility poles was compared with similar
poles either left untreated or treated with pentachlorophenol (penta). Penta-treated and untreated wood had similar electrical
resistance shortly after treatment and after a 3-month outdoor weathering period. Electrical resistance of copper naphthenate–
treated...
Wood-plastic composites are generally presumed to be inherently more resistant to moisture uptake than solid wood, but there is little data on the relative rates of moisture uptake in these materials over time. Trex[R] and Strandex[R] deck sections were immersed in water for up to 215 days, then sections were...
Mold and stain fungi can be easily controlled by kiln-drying, but even this material can be rewetted during shipping and storage, allowing fungi to colonize the wood. The potential for using surface spray treatments with commercial formulations containing combinations of propiconazole, didecyldimethyl ammonium chloride, or 3-iodo-2-propynyl butylcarbamate to protect kiln-dried...
The incidence of treated wood in a recycling stream was assessed at a recycling center in western Oregon. Chromated copper arsenate (CCA) was the predominant treatment present in the material, ranging from 0 to 2 percent of the material present at any given time. Treated wood was present at 38...
Large quantities of smaller diameter materials are available in the overstocked forests of eastern Oregon and Washington, but the costs of removing these materials and the long distances from markets sharply reduce the potential of this resource. Failure to thin these forests will sharply increase the likelihood of catastrophic wildfires....
The potential for moisture sorption by boron and fluoride rods following application of rods to wood to affect subsequent chemical diffusion was investigated in small Douglas-fir blocks conditioned to 30, 60, or 90 percent target moisture content (MC). MCs tended to decline over the 180-day test period, but there was...
The amounts of treated wood present at a wood recycling center in western Oregon were surveyed over a 10-year period. Treated wood was found at 106 of 112 inspections, but the levels never exceeded 2 percent of the volume present. The amount of treated wood averaged 0.15 percent of the...
The ability to treat Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) with oilborne copper-8-quinolinolate or with waterborne chromated copper arsenate, ammoniacal copper zinc arsenate, or ammoniacal copper quaternary was assessed using commercial treatment facilities in the Pacific Northwest. In general, Scots pine was more easily treated than was...
A solid, crystalline fumigant (dazomet) with and without a supplemental copper compound was evaluated as an internal decay control treatment on Douglas-fir poles in two long-term field tests. Methylisothiocyanate (MITC), the decomposition
product of dazomet, was used as a measure of effectiveness. MITC levels in the wood were above the...
Molds are an increasingly important issue for all building materials, including
wood. While washing with bleach is a commonly recommended method for removing
molds, and the associated discolorations, there is surprisingly little information on the
effectiveness of this treatment. The ability of mold removal treatments to brighten
wood and eliminate...
The effect of drying conditions on gas permeability and preservative treatability
was assessed on western hemlock lumber. Although there were no differences in gas
permeability between lumber dried at conventional and high temperatures, there were
differences in preservative penetration. High-temperature drying was associated with
improved penetration of ammoniacal copper zinc...
Bark plays a critical role in the life of a tree when it is standing. Once the tree is felled, however, bark has minimal value and
may be a net financial loss to the forest industry. Because of bark’s limited worth, logs are often bought and sold based on under...
Understanding how silvicultural treatments and changes in the forest resource will affect wood quality characteristics, including heartwood natural durability, is a critical need for forest managers. Because heartwood properties can be affected by environmental disturbances, including silvicultural practices used to grow trees faster, we need to know if increased growth...
An aging electricity distribution system and reduced availability of naturally durable tropical hardwoods in Australia will
combine in the next decade to produce a major shortage of poles. One approach to mitigating this shortage is to utilize lower
durability species and improve the penetration of preservatives into the refractory heartwood...
The use of a reversion technique during the search process of s-metaheuristics has received little attention with respect to forest management and planning problems. Reversion involves the interruption of the sequence of events that are used to explore the solution space and the re-initiation of the search process from a...