Fluid-structure interaction (FSI) is a very interesting and challenging multi-disciplinary field involving interaction of a movable or deformable structure with an internal or surrounding fluid flow. FSI has several practical engineering applications such as the determination of the hydrodynamic forces on a structure or the dynamics of motion of bodies...
The nonlinear dynamic analysis of cable and cable-large
body systems subject to both deterministic and non-deterministic
loading is presented in this study. Nonlinearities
occur due to large displacements, material nonlinearity,
lack of stiffness in compression, and the non-conservative
fluid loading.
A finite element model is used to model the cable...
A numerical study on the dynamic response of a generic rigid water-landing object (WLO) during water impact is presented in this paper. The effect of this impact is often prominent in the design phase of the re-entry project to determine the maximum force for material strength determination to ensure structural...
This publication is the second in a series of circulars designed to assist the graduate engineer in reviewing engineering subject matter in order to prepare for registration examinations. As in the first publication of the series, most of the illustrative problems are taken from recent examinations of the Oregon State...
Ocean Wave Energy Converters (OWECs) operating on
the water surface are subject to storms and other extreme
events. In particular, high and steep waves, especially
breaking waves, are likely the most dangerous to OWECs. A
method for quantifying the breaking severity of waves is
presented and applied to wave data...
The long duration and strong velocity content of the motions produced by the 27 February 2010 Maule earthquake resulted in widespread liquefaction and lateral spreading in several urban and other regions of Chile. In particular, critical lifeline structures such as bridges, roadway embankments, and railroads were damaged by ground shaking...
The 2011 M[subscript W] = 9.0 Tohoku-oki earthquake generated a large number of unique soil liquefaction case histories, including cases with strong ground motion recordings on liquefiable or potentially liquefiable soils. We have compiled a list of 22 strong motion stations (SMS) where surface evidence of liquefaction was observed and...
An optimization methodology, algorithms, and computer program for
cable/lumped-body deployment system are developed for the design and installation of
sonar packages in deep ocean ranges. In addition, a methodology and algorithms for the
control of the system are proposed.
A penalty function is developed in terms of the system parameters...
This report establishes an industry knowledge base for existing anchoring and mooring techniques as applied to wave energy conversion (WEC) devices in and around Oregon. This report on anchoring and mooring techniques is derived from the cumulative experiences of engineers and scientists with many years of experience analyzing, designing and...
Development of wave and offshore wind-based marine renewable energy is anticipated on the Outer Continental Shelf (OCS) off Oregon and much of the Pacific Northwest in the coming decade. Multiple issues related to environmental considerations and information needs remain for these emerging industries. The Oregon Marine Renewable Energy Environmental Science...
The eventual deployment of wave energy converters (WECs) on a commercial scale will necessitate the grouping of devices into arrays or "wave farms," in order to minimize overhead costs of mooring, maintenance, installation, and electrical cabling for shoreward power delivery. Closely spaced WECs will interact hydrodynamically through diffracted and radiated...
In this thesis, I conduct an analysis of paradigmatic background assumptions deployed in engineering decision-making processes, in order to understand how these assumptions, operating tacitly and in tension with each other, contribute to decisions that are ethically less effective and less substantial than they would otherwise be. I do so...
In this thesis, the interpretation and reduction of ocean heat
flow measurements are discussed on the basis of theoretical models.
The instrument effect x heat flow measurements is investigated for the
case of long period measurements by studying the heat conduction
along the measurement probe for both steady and unsteady...
Geotechnical engineers design and analyze the interface between the natural and built environments, often based on uncertain and inherently variable data due to the nature of the building material, soil. Engineers must estimate the subsurface conditions at a site using historical, in-situ, and laboratory testing data. However, only discrete representative...
Nearly three months of current meter records from five moorings off
the Oregon coast taken between October 1977 and January 1978 were analyzed
for near-inertial motions. The moorings were located from the midshelf
out to the foot of the continental slope, spanning the continental
margin. All but two of the...
The potential for electric energy generation from ocean waves is substantial and much research is being conducted on the conversion process as a renewable, grid-connected, power source. Some of the same attributes that make wave energy harvesting attractive as a grid-connected source also make it attractive as a remote, or...
Stabilization structures are the most commonly used form of shore protection along the Oregon coast. Eighty-five percent of the hard stabilization structures built in Oregon
from 1976 – 1999 were riprap revetments. An evaluation was conducted of 143 riprap
revetments in the northern three counties of Oregon. Clear trends exist...
ROSS (Robotic Oceanographic Surface Sampler) is an autonomous boat, equipped with oceanographic sensors, used for studying the ocean’s surface. One of its advantages over traditional research vessels is its ability to sample near glaciers, an area too dangerous for manned ships. In order to properly ascertain deep ocean heat’s effect...
Caissons are frequently used in the coastal environment for
breakwaters, jetties, seawalls, and piers. Because a satisfactory
analytical solution to a typical caisson installation has not been
developed, design of a caisson-style structure typically is either
based on physical model testing, which is expensive, or the
structure is designed as...
Most tsunami studies have been conducted based on the incompressible fluid theory. However water compressibility must be considered for the process of tsunami generation by bottom displacements during submarine earthquakes. During the 2003 Tokachi-Oki earthquake, the ocean-bottom pressure variations were registered by the pressure gauges PG1 and PG2 located right...
The purpose of the Surveying and Mapping Conference was to provide both technical information and a forum for discussion of surveying problems common to the engineer, surveyor, technician, and student. Without a growing fund of general knowledge, no profession can expect for long to survive. Conference papers contribute to the...