Index Catalog // ScholarsArchive@OSU

A composite-beam finite element for seismic analysis of wood-framed buildings

Creator:: Lee, Chyuan-shen
Abstract:: A computer program called SAPWOOD which possesses the capability of performing linear or nonlinear, static or dynamic response including seismic excitation for wood-framed buildings with semirigid connection systems is presented in this study. Program SAPWOOD is a modification of the program NONSAP by adding new elements such as a linkage...
Resource Type:: Dissertation
Full Text:: 5.8. Wood-Framed Building Subject to Earthquake Ground Motions 188 VI. CONCLUSIONS AND

A Comprehensive Mechanistic Study on Using Fine Lightweight Aggregate to Mitigate Alkali-silica Reaction

Creator:: Li, Chang
Abstract:: Previous research has shown that using fine lightweight aggregate (FLWA) can be a promising strategy to mitigate alkali-silica reaction (ASR) in mortar and concrete. While several possible theories were proposed by researchers, discrepancies in testing methods, materials, and supporting evidence still exist. Therefore, this study was initiated. There are two...
Resource Type:: Dissertation
Full Text:: several possible theories were proposed by researchers, discrepancies in testing methods, materials, and

A force plate for measuring contact forces during dependent transfers onboard aircraft

Creator:: Schafer, Christopher A.
Abstract:: The transfer of air travelers with disabilities between a mobility aid and an aircraft seat is a major source of injury for both the travelers and the airline personnel assisting in the transfer. The risk to both parties might be reduced through the biomechanical study of the transfer task. Such...
Resource Type:: Masters Thesis
Full Text:: protect them from damage. Testing of the force plate found a normal force magnitude accuracy of 0.19 %FS

A nonlocal damage theory for laminated plate with application to aircraft damage tolerance

Creator:: Nahan, Matthew F.
Abstract:: Design of commercial aircraft structure, composed of composite material, requires the prediction of failure loads given large scale damage. In particular, a fuselage of graphite/epoxy lamination was analyzed for damage tolerance given a standard large crack that severed both skin and internal structure. Upon loading, a zone of damage is...
Resource Type:: Dissertation
Full Text:: softening by allowing for a reduction in stiffness. Testing of material taken from within the damage zone

A study of compression loading of composite laminates

Creator:: Berbinau, Pierre J.
Abstract:: The compressive behavior of continuous fiber composites is not as well understood as their tensile behavior because research and industrial applications have until recently focused on the latter. Furthermore, most theoretical and experimental studies on the compression of composites have examined the case of unidirectional specimens with fibers along the...
Resource Type:: Dissertation
Full Text:: experimental results obtained from compression testing of graphite/thermoplastic laminates with the same ply

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board. Revised April 1954. Addendum added. Supplement available with revisions. No. 1842A
Resource Type:: Technical Report
Full Text:: of 50 pounds per square inch. Testing Three of the lap-joint panels prepared with each bonding

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces (Part A - Additional tests on anodized aluminum and on zinc-chromate-primed magnesium)

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on Aircraft Design Criteria under the supervision of the Aircraft Committee of the Munitions Board.
Resource Type:: Technical Report
Full Text:: the metal pieces. Testing The 3 lap-joint panels prepared with each metal, surface treatment, and

Alkali-silica reaction in concrete containing recycled concrete aggregates

Creator:: Adams, Matthew P.
Abstract:: Using recycled concrete aggregate (RCA) as a replacement for natural aggregate in new concrete is a promising way to increase the overall sustainability of new concrete. This has been hindered, however, by a general perception that RCA is a sub-standard material due to the lack of technical guidance, specifically related...
Resource Type:: Masters Thesis
Full Text:: been hindered, however, by a general perception that RCA is a sub-standard material due to the lack

Alternate methods of supplying the Oregon coast with construction aggregates

Creator:: Burchfield, Robert M., Hicks, Russel G., and Oregon State University. Sea Grant Marine Advisory Program
Abstract:: Impending shortages of high-quality aggregates in areas along the Oregon coast have forced users to search for new sources of supply. A number of feasible methods exist for supplying the affected areas. Three of these alternatives are: (1) importation, either by truck, rail, or barge; (2) the use of good-quality...
Resource Type:: Technical Report
Full Text:: transport of bulk materials by truck, rail, and barge are given in Table 1. Transporting bulk material by

An analysis of deterioration in farm structures

Creator:: Benson, Donald Dunbar
Resource Type:: Masters Thesis

ScholarsArchive@OSU

A composite-beam finite element for seismic analysis of wood-framed buildings

A Comprehensive Mechanistic Study on Using Fine Lightweight Aggregate to Mitigate Alkali-silica Reaction

A force plate for measuring contact forces during dependent transfers onboard aircraft

A nonlocal damage theory for laminated plate with application to aircraft damage tolerance

A study of compression loading of composite laminates

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces

Adhesive bonding properties of various metals as affected by chemical and anodizing treatments of the surfaces (Part A - Additional tests on anodized aluminum and on zinc-chromate-primed magnesium)

Alkali-silica reaction in concrete containing recycled concrete aggregates

Alternate methods of supplying the Oregon coast with construction aggregates

An analysis of deterioration in farm structures

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Conference Name

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search