Primary wood products manufacturers generate significant amounts of woody biomass residues that can be used as feedstocks for distributed-scale thermochemical conversion systems that produce valuable bioenergy and bioproducts. However, private investment in these technologies is driven primarily by financial performance, which is often unknown for new technologies with limited industrial...
The potential for using pretreatment with cinnamon leaf oil or juniper foliage oil to improve the durability of viscoelastic thermal compression (VTC)–treated hybrid poplar was explored in a field termite test and a laboratory mold test. The addition of oils prior to VTC processing had variable effects on resistance to...
Routine inspection of wood utility poles to detect internal decay involves drilling holes at or about the ground line. While these holes are useful for detecting internal decay, their presence raises concern among engineers about their potential effects on pole flexural properties. The effect of inspection holes on flexural properties...
The objective of this study was to test a method under development for assigning allowable properties to foreign species graded by American Lumber Standard machine-stress-rated (MSR) rules. The method was tested on dahurian larch (Larix dahurica), a major softwood species that grows in the Russian Far East and could be...
Red oak, Douglas-fir, and ponderosa pine lumber was treated with a silicon/paraffinic system to assess the ability of the treatment to limit dimensional changes and moisture uptake during changes in temperature or relative humidity. The treatment initially had little effect on either property, but the magnitude of weight gain and...
In this article, we present cradle-to-gate life-cycle inventory (LCI) data for wood fuel pellets manufactured in the Southeast United States. We surveyed commercial pellet manufacturers in 2010, collecting annual production data for 2009. Weighted-average inputs to, and emissions from, the pelletization process were determined. The pellet making unit process was...
The effect of metal end plates on reducing checking of pentachlorophenol-treated Douglas-fir crossarms was evaluated over 13 wet–dry cycles. Check development was variable over the first three to four cycles, and then steadily increased for both plated and nonplated ends of arms; however, both the number of checks and the...
Preservative treatments are required whenever glued laminated beams are exposed outdoors. Treatments can be either water-based systems applied to individual laminations prior to layup or organic solvent–borne systems applied after the beams are fabricated. Water-based systems are not recommended for posttreatment because of concerns over checking and the potential for...
The resistance of three naturally durable heartwood species and a stranded giant bamboo product to fungal and termite (Coptotermes formosanus) attack was evaluated at a test site located near Hilo, Hawaii. Merbau (Intsia bijuga or I. palembanica) and ipe (Tabebuia spp.) were both exceptionally resistant to fungal and termite attack,...
The potential of 17 hydroxylamine derivatives as wood preservatives was assessed on ponderosa pine sapwood blocks exposed to one of two decay fungi: Gloeophyllum trabeum or Trametes versicolor. Weight losses on untreated controls were generally lower with the white-rot fungus (T. versicolor) averaging 30.4 percent, while those for the brown-rot...