The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
Prepreg is widely used in composite manufacturing with advanced composites such as carbon and aramid. The material is characterized by a degree of flexibility (drape) and stickiness (tack), which allows an efficient layup on molds with complex shapes. However, axial instability of compressed fibers during the molding process may occur,...
This thesis explores the use of human kinesthetic input to advance robotic grasp planning. It specifically focuses on identification of human heuristics of grasp similarity by extensive human-subject experiments. This heuristic is then utilized to develop a robust metric for identifying similar robotic grasps. The central hypothesis of this work...
CSS-1H is the most commonly used slow-setting emulsion grade in Oregon. “New” engineered emulsions were recently developed in Oregon to reduce tracking, the pick-up of tack coats by construction vehicle tires during construction activities, and increase interlayer shear strength (ISS), the amount of adhesive bond present between layers of asphalt...
Most of existing commercial unsaturated polyester (UPE) resins are typically composed of a UPE and a high amount of highly volatile, flammable, and toxic styrene. The emission of hazardous styrene in the handling of the UPE resins and the preparation and use of fiber-reinforced UPE composites poses severe hazards to...
Duplex stainless steels (DSS) are an attractive potential material in nuclear power generation systems due to an excellent combination of corrosion resistance, strength, toughness, and affordability. Thermal embrittlement caused by phase instability in the temperature range of ~300-550°C severely limits the service temperature of DSS. The rate of embrittlement varies...
Concrete is the most widely used construction material in the world. When constructing large concrete structures, concrete may have to be placed in multiple lifts. In these cases, fresh concrete is placed on hardened concrete. The interface that is formed between these two lifts of concrete is known as a...
Variations in heat treatments have significant effects on the microstructure of tool steels. For CPM-M4 tool steel, the changes in microstructure and mechanical properties were observed based off of variations in temperature. Five heat treatments with constant exposure time and variable austenitizing and tempering temperatures were performed on samples of...
Mechanical property degradation due to isothermal ageing is of potential concern for alloys based on the Ni-Cr binary system (e.g., Inconel 690, 625), particularly in nuclear power applications where component lifetimes can exceed 40 years. In the present research, the disorder-order phase transformation, which is the primary mechanism of ageing,...
Today nano scale materials are being used for wide range of applications. One promising topic in nano scale materials is using them for reinforcement of different polymeric materials to reach desirable stiffness properties. The stiffness of these materials is mostly found experimentally because the nanocomposite community lacks a decent analytical...