The performance of a combined vapor-compression cycle/ORC is evaluated using waste-heat from a diesel generator. A flat plate microchannel heat exchanger is employed to provide energy exchange between the diesel exhaust stream and an oil loop, which provides energy to a boiler. This study finds an increased diesel duty corresponds...
As a way to improve safety and economics, one area of research and commercialization of new nuclear power plants has focused on the development of small modular reactors (SMRs). NuScale Power has developed a 50 MWe natural convection cooling SMR coupled with a regenerative Rankine cycle. Current estimates place the...
A unique channel surface enhancement technique via diffusion-bonding a layer of conductive fine wire mesh onto the heating wall was developed and used to experimentally study flow boiling enhancement in parallel microchannels. Each channel was 1000 μm wide and 510 μm high. A dielectric working fluid, HFE 7000, was used...
In the current study a thermally activated cooling system that combines an ORC system with a vapor compression cooling cycle was developed and tested under laboratory conditions. This combined system
can utilize waste heat or other thermal sources such as solar and geothermal to generate power and
cooling. Hot oil...
The performance of a combined Stirling-ORC power cycle is evaluated, and an integrated microchannel heat exchanger is designed as an annular cold-side heat rejector for a free piston Stirling engine. Reasonable designs for a combined cycle can increased power output efficiency by 3 - 9% compared to that of a...
A microchannel heat exchanger was designed for diesel waste heat recovery and its performance was evaluated. The 21x15x8 cm unit was constructed from diffusion brazed stainless steel lamina and weighed 11 kg. Operating from a 13.4 kW generator with an exhaust temperature of 500 °C the unit delivered 11.1 kW...
Rising energy demands and the continual push to find more energy efficient technologies have been the impetus for the investigation of waste heat recovery techniques. Diesel engine exhaust heat utilization has the potential to significantly reduce the consumption of fossil fuels and reduce the release of greenhouse gases, because diesel...
Membrane based heat pumps systems have attracted the attention of many research groups as a potentially more environmentally friendly alternative to vapor compression systems that are being used for space cooling in 90\% of the buildings in the United States. Several prototypes systems have been developed, with reported claims of...
High temperature microchannel heat recuperators (HTμRs) offer an efficient means of improving reactor process thermal efficiency by offering smaller form factors due to increased heat transfer surface area density and volumetric heat transfer rate over traditional heat exchanger designs. To date, HTμRs face cost and reliability challenges. In this work,...
The organic Rankine cycle (ORC) is a versatile approach in the utilization of waste heat in the production of electricity, clean drinking water, and cooling. The efficiency of these cycles must be maximized to make them economical. Parameters for the optimization of ORCs such as evaporator and condenser temperature have...