Index Catalog // ScholarsArchive@OSU

Effect of width and thickness of laminations in laminated white oak beams upon the strength and durability of the glue bond

Creator:: Forest Products Laboratory (U.S.) and Selbo, M. L. (Magnus Leonard), 1901-
Resource Type:: Technical Report

Adhesives for bonding wood to metal

Creator:: Forest Products Laboratory (U.S.), Eickner, Herbert W., and Blomquist, Richard Frederick, 1912-
Resource Type:: Technical Report
Full Text:: ADHESIVES FOR BONDING WOOD TO 11ETkL) By H. W. EICKNER, Engineer and R. F. BLOMQUIST, Chemist Forest

Effect of clamp spacing on the quality of glue bond in laminated White Oak timbers glued with an intermediate-temperature-setting phenol-resin glue

Creator:: Forest Products Laboratory (U.S.) and Selbo, M. L. (Magnus Leonard), 1901-
Abstract:: Information reviewed and reaffirmed March 1956.
Resource Type:: Technical Report
Full Text:: . R1670 The wood was conditioned to approximately 12 percent moisture content before gluing. Glue and

Experiments on the gluing of wood treated with oil solutions of chlorophenols

Creator:: Forest Products Laboratory (U.S.), Kaufert, Frank H. (Frank Henry), 1905-, and Hutchins, W. F.
Abstract:: Information reviewed and reaffirmed March 1956. Original report dated May 1945. In cooperation with the Office of Production Research and Development of the War Production Board.
Resource Type:: Technical Report
Full Text:: EXPERIMENTS ON THE GLUING CU WOOD TREATED WITH OIL SOLUTIONS CIF

Development of formaldehyde-free wood adhesives

Creator:: Peshkova, Svetlana
Abstract:: Wood adhesives are essential components of wood composites. At present, the commonly used wood adhesives, phenol-formaldehyde (PF) and urea-formaldehyde (UF) resins, are petroleum-based synthetic resins that may result in emission of formaldehyde in the production and use of wood composites. Because the world's oil reserves are naturally limited and formaldehyde...
Resource Type:: Masters Thesis
Full Text:: fast cure of UF adhesives used for bonding the panel (Maloney, 1977). Wood and wood properties

Development and characterization of new formaldehyde-free soy flour-based adhesives for making interior plywood

Creator:: Huang, Jian
Abstract:: Formaldehyde-based adhesives such as urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives dominate the current wood adhesive market. However, these adhesives are derived from petrochemicals and carcinogenic formaldehyde. In this study, we developed two formaldehyde-free adhesives based on abundant, renewable, and inexpensive soy flour (SF). The first adhesive was mainly composed of...
Resource Type:: Masters Thesis
Full Text:: forming strong bonding with wood. Alkali, organic solvents, surfactants, urea, guanidine, and protease

Wood-adhesive bondline analyses with micro x-ray computed tomography

Creator:: Paris, Jesse Loren
Abstract:: There is no doubt that adhesive penetration plays an important role in wood bondline joint performance and durability; yet, to date there is no direct experimental evidence linking penetration depth with bond performance. This is, in part, because adhesive penetration is commonly assessed with various 2D microscopy techniques that are...
Resource Type:: Dissertation

Multi-scale Investigation of Adhesive Bond Durability

Creator:: McKinley, Paige Elizabeth
Abstract:: Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of...
Resource Type:: Masters Thesis
Full Text:: ABSTRACT OF THE THESIS OF Paige Elizabeth McKinley for the degree of Master of Science in Wood Science

Effective Bonding Parameters for Hybrid Cross-Laminated Timber (CLT)

Creator:: Larkin, Blake
Abstract:: Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America. CLT products must be certified for structural...
Resource Type:: Masters Thesis
Full Text:: Wood Science presented on March 22, 2017. Title: Effective Bonding Parameters for Hybrid Cross

ScholarsArchive@OSU

Effect of width and thickness of laminations in laminated white oak beams upon the strength and durability of the glue bond

Adhesives for bonding wood to metal

Effect of clamp spacing on the quality of glue bond in laminated White Oak timbers glued with an intermediate-temperature-setting phenol-resin glue

Experiments on the gluing of wood treated with oil solutions of chlorophenols

Development of formaldehyde-free wood adhesives

Development and characterization of new formaldehyde-free soy flour-based adhesives for making interior plywood

Wood-adhesive bondline analyses with micro x-ray computed tomography

Multi-scale Investigation of Adhesive Bond Durability

Effective Bonding Parameters for Hybrid Cross-Laminated Timber (CLT)

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search