Cross-laminated timber (CLT) is a massive engineered wood product made of orthogonally bonded layers of solid-sawn lumber, and is intended for roof, floor, or wall applications. Although it was developed in Europe in the early 90s, CLT is relatively new to North America.
CLT products must be certified for structural...
The goal of this project is to contribute to the development of design values for cross-laminated timber (CLT) diaphragms in the seismic load-resisting system for buildings. Monotonic and cyclic tests to determine strength and stiffness characteristics of 2.44 m (8 ft) long shear connections with common self-tapping screws were performed....
This project determines the short term and long term effective stiffness values for Cross Laminated Timber (CLT) with a reinforced concrete topping. The reinforced concrete was attached to the CLT panels with interface connections, and different types of interface connections were tested. Throughout this project, there are 31 tests with...
Moisture durability is essential for wood composites, especially those used in building construction, where products are prone to weathering. The primary focus of this research was to determine if adhesive penetration into the cell wall has a positive influence on adhesive bond durability. To fully understand the measureable effects of...
Clostridium perfringens type A strains are one of the main causative agents of gastrointestinal (GI) diseases in human and can cause both food poisoning (FP) and non-food-borne (NFB) diseases. Several factors contribute to the pathogenesis of C. perfringens type A strains including the wide presence of C. perfringens spores with...
Boron and boron compounds have been long used for pressure treatment, dip-diffusion, and remedial treatments of wood because of their proven efficacy against fungi and insects. These materials are especially attractive because their high water solubility promotes deeper penetration into wood. Other useful properties of boron include its neutral pH,...
Commercial methodologies for producing fungal pigments are of worldwide interest due to the desire to move away from synthetic dyes. Chlorociboria species and Scytalidium species have been reported to produce sufficient yields of pigments for commercial production and have attracted special attention because of their use in spalted wood applications....
Resistance to moisture uptake is an important attribute of some wood preservatives and can help reduce moisture cycling that leads to the development of deep checks. While the potential for preservative treatments to help improve wood/moisture interactions is acknowledged, there are no tests that specifically evaluate this performance parameter. Checking...
There is no doubt that adhesive penetration plays an important role in wood bondline joint performance and durability; yet, to date there is no direct experimental evidence linking penetration depth with bond performance. This is, in part, because adhesive penetration is commonly assessed with various 2D microscopy techniques that are...
Copper is the most common ingredient in waterborne preservatives and provides excellent activity against most fungi and insects. However, issues associated with copper migration from treated wood have created increasing concerns about potential risks to non-target organisms in surrounding environments, especially those in sensitive aquatic environments. Various Best Management Practices...