A mathematical model of the atmosphere in an airshed is developed, which relates pollutant source distributions and intensities
to the volume of air available for dispersion and to pollutant concentrations
or air quality standards. It can be used as a tool for obtaining
an answer to an air resource management...
The length of time that atmospheric pollutants released from low-level
sources in the midwestern United States can expect to remain in
the atmosphere is discussed. The pollution is assumed to be removed
from the atmosphere by dry deposition and precipitation scavenging.
Layer-average trajectories originating from Kansas City, Missouri are
used...
A study was conducted to determine what effects the type of
pollutants, storage conditions, storage time, and method of sample
conditioning have on the reported weight of an air pollutant collected
by filtration. Samples were collected from a refuse dump, an arc
furnace smelting nickel ore, and a rotary kiln...
In Medford, Oregon, the major source of pollution is the lumber
mill waste burner. Its low combustion efficiency results in the
emission of large quantities of particulate into the atmosphere.
Due to the influence of the atmospheric radiation inversion and
possibly the poor performance of the burners at the time...
A source test was conducted to determine the particulate and the
total gaseous hydrocarbon emissions from a gas heated veneer dryer.
Samples were taken on eight separate days from the exhaust stacks
while the dryer was processing Douglas fir veneer. Of the eight days,
three was used to determine the...
An integrating nephelometer was set up at the Eugene Airport
which is located five miles north of Eugene, Oregon, on Highway
99 West. Continuous atmospheric scattering coefficient readings
were obtained from July 1, 1969, to August 28, 1969. These data
are converted to meteorological range through the use of the...
An emmission sampling system was developed to measure pollutants
emitted from a mobile agricultural incinerator developed at
Oregon State University. The system was designed to collect a particulate
sample on an 8" x 10" fiber glass filter and collect a gaseous
sample in a plastic bag. Pollutants measured were particulates...
A high volume sampling system, employing Nuclepore filters and
designed for sampling particulate in the plumes from industrial
sources using a light aircraft, is described. The effluent of kraft
paper mills was sampled using this system and then analyzed by
electron microscopy.
Size distributions of particles were obtained at several...