Index Catalog // ScholarsArchive@OSU

Creator:: Kate, Kunal H.
Abstract:: Powder injection molding (PIM) is widely used to manufacture complex-shaped ceramic and metal components in high production volumes. In order to design and fabricate PIM components, it is important to know a number of material properties at different powder- polymer compositions. In this thesis, several predictive models for estimating rheological,...
Resource Type:: Masters Thesis
Full Text:: and Their Use in Injection Molding Simulations of Aluminum Nitride. Abstract approved

Creator:: Jovanovic, Zoran R.
Resource Type:: Dissertation
Full Text:: critical thickness, so fresh silicon surface is exposed. A mathematical model developed on the basis of

Creator:: Thirunavukarasu, Balamurugesh
Abstract:: A computational model is developed to study the effects of alumina layer formation on an ablative surface when exposed to high temperature particle laden gas flow. The solidification dynamics i.e., the solid and liquid alumina layer growth rate, and the heat transferred to the ablative surface are investigated. A one-dimensional...
Resource Type:: Masters Thesis
Full Text:: Grid Methods ............................... 9 3 DEVELOPMENT OF PHYSICAL AND MATHEMATICAL MODEL

Creator:: Forest Products Laboratory (U.S.), Kuenzi, Edward W., and Setterholm, Vance C.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: ALUMINUM MULTIWAVIE CORES 005G r' No. 1855 September 1956 This Report is One of a Series Issued in

Creator:: Forest Products Laboratory (U.S.) and Eickner, Herbert W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1960. Original report dated August 1955.
Resource Type:: Technical Report
Full Text:: tests were made of lap-joint specimens of clad 75S-T6 aluminum alloy with various lengths of overlap and

Creator:: Forest Products Laboratory (U.S.) and Kuenzi, Edward W.
Abstract:: This report is one of a series issued in cooperation with the ANC-23 Panel on Sandwich Construction of the Departments of the Air Force, Navy, and Commerce. Information reviewed and reaffirmed 1962. Original report issued September 1955.
Resource Type:: Technical Report
Full Text:: MECHANICAL PROPERTIES Of ALUMINUM IrIONEYCOMI3 COMES No. 1849

ScholarsArchive@OSU