Friction dampers have been used successfully to dissipate seismic
energy in steel and concrete structures. The application is new to timber
structures. The objectives of this research were to design a slotted bolted
connection (SBC) and evaluate its potential as a passive energy damper in
timber brace.
The research was...
Nailed connections have nonlinear load-displacement
relations. Modeling these connections in an assembled
structure would require a great amount of computational time
because of the large number of degrees of freedom.
Replacing these connections with energetically-equivalent
nonlinear springs reduces the number of degrees of freedom,
and leads to computational efficiency in...
A considerable amount of research has focused on load-sharing and system effects in repetitive-member wood floor systems subject to transverse loading. However, relatively few studies have been conducted to investigate load-sharing and system effects in repetitive-member wall systems which may be subject to combined transverse and gravity (vertical) loading, and...
Performance-based design has gained interest in recent years among structural designers and researchers. Performance-based design includes selection of appropriate building sites, structural systems and configurations, as well as analytical procedures used in the design process, to confirm that the structure has adequate strength, stiffness and energy dissipation capacity to respond...
The objective of this project was to develop an analytical model of a light-framed wood structure using a prevalent structural analysis computer program in order to evaluate system effects and define load paths within the structure, especially under extreme wind events. Simplified modeling techniques and material definitions were developed and...
The objective of this study was to compare light wood framing and traditional timber
framing quantitatively through environmental impact assessment and load path analysis. This
research was inspired by a traditional timber frame structure constructed in Vermont in 2011, and
the design of structures considered within reflect the general characteristics...