Search Constraints

Start Over
Filtering by: Subject Calorimeters -- Design and construction Remove constraint Subject: Calorimeters -- Design and construction

Search Results

  • Small sample, low-temperature calorimetry

    Creator:
    Wolochuk, Lee
    Abstract:
    A calorimeter capable of measuring the heat capacity of 1 mg size samples from 4.2 to greater than 100 K has been designed, constructed, and tested. The sample is bonded to the end of a 0.002 inch diameter, 0.5 cm long chromel-constantan thermocouple (type E) and heated optically with a...
    Resource Type:
    Masters Thesis
    Full Text:
    of this work is to design, construct, and test a calorimeter capable of measuring the specific heats

  • Economical designing of timber trestle bridges

    Creator:
    United States. Division of Forestry and Johnson, Albert Lynn
    Resource Type:
    Technical Report
    Full Text:
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Fig. 7.-Showing construction with two vertical and two slanting legs . . . . . . . ::13 5

  • Balancing the connecting rod linkage

    Creator:
    Johnson, Wilfrid Estill
    Resource Type:
    Masters Thesis
    Full Text:
    importance, particlerly In the design of aeroplane motors. Balancing thod.s ere then discueeed, and

  • The effect of automobile body design on horsepower consumption

    Creator:
    Eyolfson, Paul
    Resource Type:
    Masters Thesis
    Full Text:
    cnventional design. Advancement in design has been a process of furnishing more powerful, economical and. de

  • Polar analysis of beam-columns for aircraft

    Creator:
    Jones, Walter Richard
    Abstract:
    The analysis of a member carrying a combination of lateral and axial loads (a "beam-column") is a problem of frequent occurrence in aircraft structural design. This thesis presents the derivation and application of the Polar method, both analytical and graphical. The method was first suggested in Germany, several years later...
    Resource Type:
    Masters Thesis
    Full Text:
    structural design. This thesis presents the derivation and aplication of the Polar nthod, both analytical

  • The theoretical design and construction of a .25 calibre automatic repeating rifle

    Creator:
    Winniford, John Franklin
    Abstract:
    In the construction of a rifle for sporting or target work there are several conditions to be met. In the first place the rifle must be made to balance easily.at all times, whether the magazine is full of loaded cartridges or is empty. In all cases the barrel of the...
    Resource Type:
    Undergraduate Thesis
    Full Text:
    The theoretical design and construction of a .25 calibre

  • A quantitative index for evaluation of plant layout alternatives

    Creator:
    Pond, James Woodrow Jr.
    Abstract:
    The purpose of this study is to develop a workable plant layout evaluation technique incorporating adequate definitive measures of intangible plant layout considerations. A summary and critique is given of existing evaluation methods. A quantitative evaluation index (QEI) is proposed to remedy the described deficiencies. The proposed index can be...
    Resource Type:
    Masters Thesis
    Full Text:
    in determining the worth of a given layout design. This relative shortage of effective and usable

  • Trade-offs between geometric design standards and safety for low volume roads

    Creator:
    Kornsombut, Aram
    Abstract:
    Geometric design standards have not been developed specifically for low volume roads. Design standards and criteria are extrapolated from higher standard roadways that are often not relevant to low volume roads. Safety is a primary criterion used for selection of design standards along with economic, financial, social and environment factors....
    Resource Type:
    Masters Thesis
    Full Text:
    - tion of the country's gross national product is committed to the design, construction and

  • Progress in the development of a portable phoswich-style skin contamination dosimeter

    Creator:
    Tang, Matthew M.
    Abstract:
    The Code of Federal Regulations (10CFR20.1201) mandates occupational dose limits to the shallow, lens and deep tissue layers. The NRC-accepted procedure of estimating dose to these layers from contamination events is laborious. The current work aims to further the development of a portable phoswich-style skin dosimeter that will operate in...
    Resource Type:
    Masters Thesis
    Full Text:
    ) .......................................................................... 29 4. DESIGN AND CONSTRUCTION

  • Interlaced instruction window

    Creator:
    Ong, Wee-Shong
    Abstract:
    A relatively recent development in the late 1980s in processors has been the superscalar processor. Superscalar processors use multiple pipelines in an attempt to achieve higher performance than previous generations of processors. Having multiple pipelines makes it possible to execute more than one instruction per cycle. However, since instructions are...
    Resource Type:
    Masters Thesis
    Full Text:
    multiple windows in the interleaved window design and the extra logic needed before and after the windows