Moisture damage has long been recognized as one of the most
critical factors influencing the performance of asphalt concrete (AC)
pavements. This moistureinduced damage occurs from either the
physical separation of the asphalt film from the aggregate or the
softening of the asphalt binder within the AC mixture in the...
Environmental factors such as temperature, air, and water can have a profound
effect on the durability of asphalt concrete mixtures. In mild climates where good
quality aggregates and asphalt cement are available, the major contribution to
deterioration may be due to traffic loading and the resultant distress is manifested
in...
A method of analysis of arbitrarily shaped prestressed concrete
members for biaxial bending is given. The stress-strain curve of
the concrete is represented by two parabolic segments, and the
effects of strain hardening of the steel are included in the analysis.
An iterative numerical procedure is used to solve for...
Concrete is the most widely used construction material in the world. When constructing large concrete structures, concrete may have to be placed in multiple lifts. In these cases, fresh concrete is placed on hardened concrete. The interface that is formed between these two lifts of concrete is known as a...
........................................................................... 49
Table 12—Statistical comparison results from ANOVA testing using Da data of
bulk concrete
Asphalt concrete pavement is subjected to several damaging actions from traffic
loads, water (from precipitation and/or groundwater sources), and temperature. The
durability of the asphalt-aggregate mixture, its ability to withstand these damaging
actions for long periods, is a very important engineering property. While the durability
of the asphalt-aggregates mixture depends...
The research presented here is a study to determine the effect of shear reinforcement corrosion on the shear capacity in conventionally reinforced concrete (CRC) bridge elements. A total of 14 CRC beams were tested using three stirrup spacings (8, 10, and 12-inch). Six of the beams included the influence of...
A need exists to develop a non-destructive testing technique that can identify
the formation and propagation of diagonal tension cracks in conventionally
steel reinforced concrete deck girder (RCDG) highway bridges in the State of
Oregon. Such a technique could be included into a structural health
monitoring (SHM) system installed on...