A circuit which functions as a controlled negative-resistance is
described and analyzed; the circuit contains two transistors, a breakdown
diode, and five resistors connected in a stable feedback configuration.
From the analysis a set of design equations is derived.
An experimental circuit is described and a comparison between
measured performance...
The operation of a tunnel-diode delay-line memory cell is
examined in some detail, and a digital computer program which
approximately simulates the operation of this memory cell is developed.
The data from the computer simulation is compared with the
available experimental data and found to agree very closely for clock...
Three synthesis methods for the realization of the
voltage transfer function by means of RC elements and
three different active devices are presented. These
three devices are a high-gain amplifier, a voltage controlled
voltage source (VCVS) and a negative immittance
converter (NIC). The VCVS and NIC as well as the...
A set of circuit analysis programs designed for the IBM 1620
computer (having 40,000 digits of memory) is described and its operation
is explained. The set consists of d-c, a-c, and transient analysis
programs.
The d-c and a-c analysis programs provide the branch current
and node-to-reference potential for linear circuits....
The improved accuracy of Time Domain Reflection and Transmission (TDR/T)
measurements made possible by the calibration process known as Time Domain
Network Analysis (TDNA) is applied to the problem of characterization and modeling
of electronic interconnect and packaging structures. TDNA uses measurements of
known and partially known calibration standards to...
Currently, the two most critical factors of microprocessor design are performance and power. The optimum balance of these two factors is reflected in the speed-power product(SPP). 32-bit CMOS adders are used as representative circuits to investigate a method of
reducing the SPP. The purpose of this thesis is to show...