This thesis presents both an analysis and simulations of a passively controlled variable-speed generator system, which can be applied for renewable energy sources such as wind turbines. Parallel connected passive/external resistors and inductors are connected to the slip rings of a wound rotor induction machine to provide an acceptable speed...
Recent opportunities for new hydropower generation in the United States have often been in non-powered dams and run-of-river type flows occurring in low-impact natural areas and unregulated conduits. At the same time, a changing water resource paradigm is challenging some existing generation in drought stricken areas where supply reservoirs behind...
This thesis presents the development of dynamic control strategies for the
brushless doubly-fed machine (BDFM). A simple open-loop scalar controller is first
investigated and its response is found to be oscillatory. Using the speed feedback
signal, an improved closed loop scalar control algorithm is designed. Steady state
performance is controlled...
Ocean wave energy is rapidly becoming a field of great interest in the world of renewable energy. Significant advancements in design and technology are being made to make wave energy a viable alternative for our growing energy demands. The two major hurdles for ocean wave energy to make a significant...
The Motor Systems Resource Facility (MSRF) at Oregon State University presently conducts a variety of steady state tests on Motors and Generators, with ratings of upto 300Hp.(225kW), using a dynamometer. The dynamometer consists of an induction motor fed by a power electronic converter. A control computer uses a serial link,...
The exceptional feature of the brushless doubly-fed
machine is the lack of need for frequent replacement of
brushes. The inherent instability of this machine has to be
overcome for its application in adjustable speed drives and
variable speed generation systems.
Specific objectives were:
to study the characteristics of the machine...
This thesis presents the development of a supervisory controller for a pre-commercial
Brushless Doubly-Fed Machine (BDFM) drive system. In addition,
characterizations of new diecast rotors for the BDFM are presented. Using the
characterization results from the new rotors, a control scheme was developed to allow a
BDFM to be packaged...