This paper is a study of various linear Metal-Oxide-
Semiconductor integrated circuit configurations with the
goal of improving their operation. The operation of MOS
devices is covered including their use as load devices
to replace diffused resistors. The advantages and disadvantages
of the resulting circuits as well as possible
physical...
The purpose of this study is to investigate radiation
losses in microstrip circuits. Expressions are derived to
evaluate the radiation resistances (or conductances) for
single terminated, open and short-circuited lines. The
quality factor Q of open and short-circuited stubs is
evaluated. An analytical procedure is formulated to
evaluate the radiation...
The exponential characteristic of the base-emitter
Junction in bipolar transistors was used to make an
accurate and fairly temperature independent multiplier.
Using hybrid-pi transistor models and ECAP, a
bandwidth of 350 MHz was predicted. Linearity is
limited by emitter degeneration in the input differential
stage rather than by the small...
This thesis discusses the design and evaluation of an instrument
that can detect known signals in noise. This detector uses
two integrators to sense a difference in the received signal between
half-cycles of the known signal.
The detector is useful for sensing signals in the approximate
frequency range of 100...
A circuit designed to generate and maintain a constant magnetic
flux is presented by using a sample-data control system, instead of a
continuous control system.
A Hall generator is used as the magnetic sensing element, and
is operated with a pulse bias to allow a large output. The output of...
Periodic signals hidden in noise may be detected by using
correlation techniques This thesis presents a study of how
correlation is approximated statistically, and carried out electronically.
The ability to detect periodic signals in noise, using correlation,
is justified mathematically in the first portion of the thesis.
The discussion is...
This thesis discusses the analysis, design, and experimental
evaluation of an instrument that can be used to detect the presence or
absence of a signal, not necessarily known, in a noisy background.
The detection principle is based on application of the sign test of
distribution-free statistics to the stochastic process...
In this dissertation, two important current mode circuit design subjects have
been explored. In the first part, the switched-current circuit technique has been
investigated. The fundamental performance and limitations of this technique are
explored. One of the major limitations, the signal distortion caused by clock
feedthrough has been substantially reduced...
With increasing interest in current-mode analogue processing due to its high
performance properties such as speed, bandwidth and accuracy compared to voltage-mode
processing, new current-mode alternatives to various conventional circuit designs are
appearing. In this report, a novel circuit design to construct a fully-differential current-mode
operational amplifier ( OP-AMP )...