Index Catalog // ScholarsArchive@OSU

Direct coupling of imaging to morphology-based numerical modeling as a tool for mechanics analysis of wood plastic composites

Creator:: Lin, Xiang
Abstract:: Polymeric composites reinforced with bio-materials have advantages over composites with synthetic reinforcements. Bio-based composites use low-cost and renewable reinforcements, have nonabrasive properties for machining, have improved damping characteristics, and have potential for energy recycling. However, the limited use of bio-based composites is because their mechanical properties are typically much lower...
Resource Type:: Masters Thesis
Full Text:: results of MPM simulation for axial strain in a layer with coordinate 0.3792mm (a) Inclusion property is

The measurement of interphase properties in wood-polystyrene composites utilizing inverse gas chromatography

Creator:: Hong, Zhenqiu
Resource Type:: Masters Thesis

Cellulose reinforced high density polyethylene

Creator:: Palaniyandi, Velmurugan
Abstract:: High density polyethylene (HDPE) is a ubiquitous material with versatile properties. It is produced and used in greater volume than any other thermoplastic. HDPE is often filled with a variety of materials for various applications. Glass fiber and wood flour are two common fillers for HDPE. Recently there has been...
Resource Type:: Masters Thesis

Design, analysis, and validation of composite c-channel beams

Creator:: Koski, William C.
Abstract:: A lightweight carbon fiber reinforced polymer (CFRP) c-channel beam was previously designed using analytical theory and finite element analysis and subsequently manufactured through a pultrusion process. Physical testing revealed the prototype did not meet the bending and torsional stiffness of the beam model. An investigation revealed that the manufactured prototype...
Resource Type:: Masters Thesis
Full Text:: : _____________________________________________________________________ John P. Parmigiani A lightweight carbon fiber reinforced polymer (CFRP) c-channel beam

Evaluation of Abaqus for simulating quasi-static Mode III shear of edge notched carbon fiber reinforced polymer panels

Creator:: Hyder, Imran
Abstract:: The ability to engineer stiffness and strength in any desired direction make composites an ideal material candidate for various applications when compared to their traditional isotropic counterparts. In spite of this, the ability to model the material response in composites has yet to be fully explored. Composite research largely focuses...
Resource Type:: Masters Thesis

Three-dimensional, nonlinear viscoelastic analysis of laminated composites : a finite element approach

Creator:: Wang, Min
Abstract:: Polymeric composites exhibit time-dependent behavior, which raises a concern about their long term durability and leads to a viscoelastic study of these materials. Linear viscoelastic analysis has been found to be inadequate because many polymers exhibit nonlinear viscoelastic behavior. Classical laminate theory is commonly used in the study of laminated...
Resource Type:: Dissertation
Full Text:: symmetric property of the compliance matrix and assuming that the fiber-reinforced composite materials are

A parametric study of the design of coathanger dies using computational fluid dynamics

Creator:: Kim, Lance Changyong
Resource Type:: Masters Thesis
Full Text:: third method is to do a computer simulation using commercially available CFD programs. This is most

Relationship between thickness and mechanical properties of several glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Kimball, Kenneth Edmund
Abstract:: This report is one of a series issued in cooperation with the ANC-17 Panel on Plastics for Flight Vehicles of the Departments of the Air Force, Navy, and Commerce.
Resource Type:: Technical Report
Full Text:: thickness on the mechanical properties of various glass-reinforced plastic laminates, a presentation of the

Effect of long-term loading on glass-reinforced plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Boller, Kenneth H.
Abstract:: Information reviewed and reaffirmed 1965. Revised September 1958.
Resource Type:: Technical Report
Full Text:: stress-rupture and creep charac- teristics of several glass-fiber-reinforced plastic laminates typical of

Effect of thickness on the mechanical properties of glass-fabric-base plastic laminates

Creator:: Forest Products Laboratory (U.S.) and Youngs, R. L. (Robert Leland), 1924-
Resource Type:: Technical Report
Full Text:: University of Wisconsin. Report No. 1873 Introduction Mechanical properties of glass-fabric-base plastic

ScholarsArchive@OSU

Direct coupling of imaging to morphology-based numerical modeling as a tool for mechanics analysis of wood plastic composites

The measurement of interphase properties in wood-polystyrene composites utilizing inverse gas chromatography

Cellulose reinforced high density polyethylene

Design, analysis, and validation of composite c-channel beams

Evaluation of Abaqus for simulating quasi-static Mode III shear of edge notched carbon fiber reinforced polymer panels

Three-dimensional, nonlinear viscoelastic analysis of laminated composites : a finite element approach

A parametric study of the design of coathanger dies using computational fluid dynamics

Relationship between thickness and mechanical properties of several glass-fabric-base plastic laminates

Effect of long-term loading on glass-reinforced plastic laminates

Effect of thickness on the mechanical properties of glass-fabric-base plastic laminates

Limit your search

Academic Affiliation

Advisor

Commencement Year

Committee Member

Creator

Date

Decade

Degree Field

Degree Level

Degree Name

File Format

Language

License

Non-Academic Affiliation

Peer Reviewed

Resource Type

Rights Statement

Subject

Search Constraints

Search Results

Limit your search