A unique microreactor-assisted nanomaterial synthesis and printing process was studied for the fabrication of patterned metal oxide nanostructured thin films. The process uses a continuous flow microreactor to control and generate a reactive chemical flux that was transported to a patterned microfluidic channel. The microreactor-assisted nanomaterial synthesis process can generate...
The purpose of this research is to provide a simple fabrication method for zinc oxide and antimony sulfide based thin film solar cells. Both a ZnO nanorod electron conducting structure and a stibnite absorber show promise in a solar cell. Initial attempts at using only ZnO and Sb2S3, however, resulted...
Bubble nucleation control, growth and departure dynamics is important in understanding boiling phenomena and enhancing nucleate boiling heat transfer performance. We report a novel bi-functional heterogeneous surface structure that is capable of tuning bubble nucleation, growth and departure dynamics. For the fabrication of the surface, hydrophobic polymer dot arrays are...
Copper zinc tin sulfide (CZTS) is a potential solar material for thin film solar cells according to its suitable band gap in the visible light range, high absorption coefficient, low toxicity, good photostability and relative earth abundance of component elements. However, the production cost of this solar thin film material...
Covalent organic frameworks (COFs) are an emerging type of microporous crystalline polymers connected by organic units via strong covalent bonds. Due to the well-defined crystalline structure and excellent chemical and thermal stabilities, COF materials are being considered as promising candidates in a variety of applications, such as gas adsorption, catalysis...
Photoluminescence (PL) materials have attracted a lot of attention in last several decades. Recently PL materials, which can convert low-efficiency Ultraviolet (UV) or Infrared (IR) light to high-efficiency visible light, have been widely applied in the research of improving conversion efficiency of solar cell. As one of the most common...
Inkjet-printed p-type copper(I) iodide-based TFTs were successfully fabricated. As-printed copper(I) halide semiconductor films, such as CuI, CuBrI, and CuClI, were used as p-type active channel layers for TFTs. The entire process of the TFTs fabrication was maintained under 150 °C, which is compatible with flexible plastic substrates and transparent glass...
Digital printing techniques offer several advantages in manufacturing electronics such as direct writing of materials, reduction of chemical waste, and scalability. In particular, printing can significantly simplify manufacturing processes by directly defining the channel area, the gate, and the source and drain contacts, allowing for lower costs and higher throughput...
Transparent and electrically conductive metal oxide nanoparticles have attracted much attention, and can be used to improve the performance of solar cells, transparent electrode materials, and gas sensor technology. Specifically, indium tin oxide (ITO) nanocrystals (NCs) are potentially useful nanomaterials, having technological applications in enhanced sensitivity of optical spectroscopy due...
Light trapping plays a phenomenal role in enhancing light confinement and light absorption within the solar cells, thus increasing the optical efficiency of the cell. Different strategies are employed for trapping light photons within the cell. Methods used include a substrate or single layer texturing, light trapping coating, plasmonic gratings,...