In the next decade, technology trends--smaller dimension, lower voltage, higher operating frequency--introduce new technical considerations and challenges for radiation effects in integrated circuits. Semiconductor based circuits and traditional dynamic random-access memories will malfunction when exposed to extreme environments, such as space and nuclear reactor. The mechanisms for radiation effect are...
This thesis examines the dielectric properties of two systems based on the perovskite materials
barium titanate and strontium titanate. A solid solution was created starting with these base
materials and then adding varying amounts of bismuth-zinc titanate and sodium niobate. These
compositions were calcined and sintered at temperatures determined to...
Aluminum and copper and their alloys have been widely used due to relatively high strength-to-weight ratios compared with conventional steels. Processing of these alloys is typically conducted at high temperatures over extended time periods. High-pressure torsion (HPT) is a promising processing technique for introducing significant grain refinement leading to excellent...
High energy density ceramic capacitors with temperature stable permittivity across -150°C to 300°C are desired for a wide variety of electronic devices. Traditional dielectrics such as barium titanate provide a high permittivity but that permittivity is strongly temperature dependent over this specified temperature range. The goal of this work is...
Phase change memory materials are a set of chalcogenide or pnictogenide materials systems currently being researched for use in optical and resistive based memory systems due to their large change in optoelectronic properties between the amorphous and the crystalline states. For these materials systems to be considered as a suitable...
Mechanical property degradation due to isothermal ageing is of potential concern for alloys based on the Ni-Cr binary system (e.g., Inconel 690, 625), particularly in nuclear power applications where component lifetimes can exceed 40 years. In the present research, the disorder-order phase transformation, which is the primary mechanism of ageing,...
Micro air vehicles (MAV's) and small unmanned aerial vehicles (SUAV) are remotely piloted or autonomous aircraft with a take-off mass range between 50 g and few kilograms. These vehicles, as well as natural fliers such as bats and insects, utilize a variety of elastic wing structures including thin membranes. Over...
Spintronics is an emerging field of research dealing with devices that can potentially exploit the additional degree of freedom provided by the electron spin along with or instead of the conventional electronic charge. One of the most promising aspects of spintronics is the potential use of magnetostatic spin waves as...
Nanolaminate dielectrics combine two or more insulating materials in a many-layered film. These structures can be made to significantly outperform films composed of a single one of their constituent materials by adjusting the composition ratio, arrangement, and size of the component layers. In this work, atomic layer deposition (ALD) is...
Thin films are an enabling technology for a wide range of applications, from microprocessors to diffusion barriers. Nanolaminate thin films combine two (or more) materials in a layered structure to achieve performance that neither film could provide on its own. Atomic layer deposition (ALD) is a chemical vapor deposition technique...