The objective of the study is to analyze empirically the demand
for hired farm labor and the elasticities of substitution of capital for
labor in the U.S., the Middle Atlantic region, the Pacific region, and
in the states of California and Oregon.
The data period 1941-1969 was analyzed for the...
Four assumptions--
1. That there is an effective and potential demand for processed
fruit products in the Western State of Nigeria.
2. That current supply of raw materials in the Western State
of Nigeria is more than sufficient to meet the increased demand
which the short-term addition or expansion (or...
The object of this research, project was to study how
different parameters effect the magnitude and frequency
composition of forces exerted on simulated heat exchange
tubes immersed in a cold fluidized bed. Two arrays of
tubes were assembled with the tubes mounted in an
equilateral triangular pitch pattern. The center...
Polymeric composites exhibit time-dependent behavior, which raises a concern
about their long term durability and leads to a viscoelastic study of these materials.
Linear viscoelastic analysis has been found to be inadequate because many polymers
exhibit nonlinear viscoelastic behavior. Classical laminate theory is commonly used in
the study of laminated...
In mining and mineral processing, compressive loading is often encountered
during the comminution of ore bearing minerals and in the wear resistant materials
used in the comminution circuit. A common thread joining many of the materials that
are primarily used under compressive loading is the presence of a high modulus...
Design of commercial aircraft structure, composed of composite material, requires the
prediction of failure loads given large scale damage. In particular, a fuselage of
graphite/epoxy lamination was analyzed for damage tolerance given a standard large
crack that severed both skin and internal structure. Upon loading, a zone of damage is...
Cavitation instabilities in elastic-plastic solids under spherically-symmetric and axisymmetric loadings were investigated using the finite element method. Both quasi-static and dynamic analyses were used to solve these problems. In the quasi-static analyses, we investigated a cavitation instability in elastic/perfectly-plastic, linear hardening elastic-plastic, power hardening elasticplastic, and constrained silver materials. Here,...
In granular or fibrous materials, in which the dimensions of the internal
structure can be of the same order of magnitude as major flaws or holes, classical
elasticity theory does not consistently provide accurate models of the large stress
gradients that may develop. With the incorporation of additional rotational degrees...