The need for clean and renewable fuel such as hydrogen is driven by a growing worldwide population and increasing air pollution from fossil fuels. One of the major barriers for the use of hydrogen in automotive industry is the storage of hydrogen. Physisorption is the most promising storage technique due...
An experimental and numerical study of absorption of ammonia vapor bubbles into a constrained thin film of ammonia-water solution is presented in the context of a potential reduction in size of a heat-actuated heat pump component. A large-aspect-ratio channel with a depth of 600 µm restricts the thickness of the...
Heats of immersion were obtained for four different organophilic
clay complexes in a series of normal alcohol-heptane mixtures
with alcohols of increasing chain length. The immersion calorimeter
employed was the Dewar type with a sensitivity of approximately
5 x 10⁻⁵°C.
Gel volumes were determined for two of the clay complexes...
Compact storage systems demonstrating increased hydrogen storage capacity are the key to advancing the growth of the hydrogen economy throughout the world and reducing the global dependence on fossil fuels for transportation. The use of highly porous adsorbent materials for reversible hydrogen storage is a promising pathway towards achieving storage...
Hydrogen has been shown to be a promising replacement for fossil fuels for use in light duty vehicles because it is a clean, renewable and plentiful resource with a high gravimetric energy density. However, in order to obtain an acceptable volumetric energy density, densification of the hydrogen is required. Adsorptive...
The expansion of a gas within a piston-cylinder arrangement is studied in order to obtain a better understanding of the heat transfer which occurs during this process. While the situation of heat transfer during the expansion of a gas has received considerable attention, the process is still not very well...
Cogeneration is the simultaneous generation and use of
both electricity (or mechanical power) and thermal energy
from a single fuel source. It is a technology that has been
used for years by industries, commercial institutions, and
municipalities that need both heat and electrical power. An
analytical approach has been developed...