Most of the concrete in the world is produced using hydraulic cement (ordinary portland cement, OPC) and siliceous or alumino-siliceous supplementary cementitious materials (SCM). Due to the shift in focus toward environmental sustainability within the construction industry, alkali-activated cementitious systems (AAC) have gained significant attention to reduce the carbon footprint...
To ensure the safety of the nation’s bridges, the National Bridge Inspection Standards (NBIS) require all bridges to undergo routine load rating analyses to assess their structural capacity. Accurate geometric information for each structure is necessary for load rating analyses. This information is typically ascertained from as-built plans. Still, when...
While real-time hybrid simulation has been utilized for structures subjected to seismic events for decades, its use in fluid-structure interaction problems is still a novel endeavor. Gathering data for cascading seismic and tsunami events is difficult due to space constraints in existing experimental facilities, complications regarding the application of scaling...
Cross-Laminated Timber (CLT) is one of the latest engineered wood products to show promising structural features for a variety of structural purposes including resisting lateral loads. For CLT to be widely adopted, its modal behavior needs to be fully evaluated through experimental and numerical methods. It is important to the...
This thesis examines the postmodern confrontation of representation throughout the oeuvre of Martin McDonagh. I particularly look to his later body of work, which directly and self-reflexively confronts issues of artistic representation & masculinity, in order to gain a more nuanced understanding of his earliest and most controversial plays. In...
The aim of this research is to understand and quantify the modeling differences between CSiBridge and OpenSees, and to determine sensitive model parameters. When designing bridges for the high seismic region of California, the California Department of Transportation (Caltrans) performs nonlinear time history analysis of their bridge models. For three-dimensional...
High performance concrete (HPC) provides a long lasting, durable concrete that is typically used in bridge decks due to its low permeability, high abrasion resistance, freeze-thaw resistance and strength. However, this type of concrete is highly susceptible to the deleterious effects of both autogenous and drying shrinkage. Both types of...
Infrastructures along the Oregon Coast are vulnerable to seismic events in the Cascadia Subduction Zone that could generate large tsunamis. Bridges along the coast are an important part of the transportation and lifeline system in the area. The major damages on these bridges due to earthquake and/or tsunami would result...
The experimental setup and data are presented for a laboratory experiment conducted to examine realistic wave forcing on a highway bridge superstructure. The experiments measure wave conditions along with the resulting forces, pressures, and structural response of a 1:5 scale, reinforced concrete model of a typical section of the I-10...
The behavior of mass timber beam-to-column connections under seismic loading is not yet well understood. Mass timber beam-to-column connections must have the ability to maintain load-carrying capacity despite the deformations that will be imposed on all components of the building during seismic events. This behavior is called deformation compatibility. The...